Inglis Parts

Inglis Appliance Parts
Shop By Appliance Type

Popular Inglis Parts

Your Price
$64.66
  In Stock
Refrigerator Center Crisper Drawer Slide Rail - White
★★★★★
★★★★★
197 Reviews
PartSelect Number PS11757048
Manufacturer Part Number WPW10671238
Fixes these symptoms
  • Clicking sound
  • Door won’t open or close
  • Fridge and Freezer are too warm
  • See more...
Your Price
$21.92
  In Stock
Multi Rib Belt - 92-1/4"
★★★★★
★★★★★
131 Reviews
PartSelect Number PS346995
Manufacturer Part Number 341241
This dryer drum belt has four ridges, three grooves and is 1/4" wide.
Fixes these symptoms
  • Drum Not Spinning
  • Heat stays on after drum has stopped
  • Noisy
  • See more...
Your Price
$68.33
  In Stock
Dryer Repair Kit
★★★★★
★★★★★
120 Reviews
PartSelect Number PS373088
Manufacturer Part Number 4392067
This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings, and one washer. This universal maintenance kit is an all-encompassing kit for fixing a noisy dryer, among other symptoms, but noisy being the most common. It is compatible with 27-inch wide dryers built from 1965 onwards. Be sure to disconnect the dryer or shut off the house circuit breaker for the appliance before you begin your repair. To access these parts, you will need to remove the dryer drum. For this installation you will need a 1/4-inch nut driver, a long flat-blade screwdriver, a short flat-blade screw diver, and a Phillips screwdriver.
Fixes these symptoms
  • Drum Not Spinning
  • Marks left on clothes
  • Noisy
  • See more...
Your Price
$25.03
  In Stock
Dryer Thermal Fuse
★★★★★
★★★★★
105 Reviews
PartSelect Number PS11741460
Manufacturer Part Number WP3392519
Fixes these symptoms
  • Heat stays on after drum has stopped
  • Not Heating
  • Too hot
  • See more...
Your Price
$9.83
  In Stock
Rack Track Stop
★★★★★
★★★★★
55 Reviews
PartSelect Number PS11746591
Manufacturer Part Number WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Not cleaning dishes properly
  • See more...
Your Price
$5.60
  In Stock
Agitator Directional Cogs
★★★★★
★★★★★
132 Reviews
PartSelect Number PS388034
Manufacturer Part Number 80040
These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
Fixes these symptoms
  • Does not dispense fabric softener or detergent
  • Marks left on clothes
  • Not cleaning dishes properly
  • See more...
Your Price
$6.43
  In Stock
Door Catch Kit
★★★★★
★★★★★
63 Reviews
PartSelect Number PS334230
Manufacturer Part Number 279570
This kit contains two door strikes, and three door catches to service dryer doors that have one or two catches.
Fixes these symptoms
  • Door Pops Open
  • Door won’t close
  • Lid or door won’t close
  • See more...
Your Price
$11.31
  In Stock
Light Bulb - 40W
★★★★★
★★★★★
60 Reviews
PartSelect Number PS2376034
Manufacturer Part Number 8206232A
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The bulb attaches directly to an appropriate light socket and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair. This light bulb measures about 1 1/8 inches. We do not recommend using a higher-wattage bulb for this appliance, and can only recommend this specific bulb. If fixing the bulb does not solve your microwave light issue, it's possibly a problem with the socket, which means the socket and/or board will need to be replaced. This can be a more dangerous repair, so consult your user manual or a technician before attempting.
Your Price
$47.79
  In Stock
Maintenance Kit
★★★★★
★★★★★
76 Reviews
PartSelect Number PS373087
Manufacturer Part Number 4392065
Includes Belt 8066065, Rollers WPW10314173, Pulley 691366, Clip 90296, Tri-ring W10512946. 4 Roller Kit 4392067
Fixes these symptoms
  • Drum Not Spinning
  • Marks left on clothes
  • Noisy
  • See more...
Your Price
$14.96
  In Stock
Light Bulb - 40W
★★★★★
★★★★★
27 Reviews
PartSelect Number PS884734
Manufacturer Part Number 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.

Appliance Type