LG Parts

LG Appliance Parts
Shop By Appliance Type

Popular LG Parts

Your Price
$69.21
  In Stock
Dryer Lint Filter
★★★★★
★★★★★
22 Reviews
PartSelect Number PS3531962
Manufacturer Part Number ADQ56656401
The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.
Fixes these symptoms
Your Price
$149.74
  In Stock
Washing Machine Drain Pump
★★★★★
★★★★★
66 Reviews
PartSelect Number PS3579318
Manufacturer Part Number 4681EA2001T
The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after the spin cycle speed is maintained for a specific period of time. To make this installation you will need a Phillips screwdriver, a small flat-blade screwdriver, a pair of needle-nose pliers, and a pair of slip-joint pliers. Note that the pump casing is not included. This medium-difficulty repair may vary, but can generally be started by disconnecting power, then removing the top of the washer by taking out the four back screws and two small brackets. Then, remove the front panel by taking out the two screws and eight tabs that should be taken from the top. Moving down the front of the washer, remove the door, latch, tub gasket, and drain cover. Disconnect the drain hoses and clip from under the drain assembly, and install new assembly from there. Reassemble parts in direct reverse order -- taking photos during disassembly and keeping parts clearly organized can help here. Despite the number of steps, you will only need a standard Phillips screwdriver to complete this repair.
Fixes these symptoms
  • Draining Issues
  • Engine runs but does not pump water
  • Leaking
  • See more...
Your Price
$73.79
  In Stock
Dryer Lint Filter Assembly
★★★★★
★★★★★
5 Reviews
PartSelect Number PS3527575
Manufacturer Part Number 5231EL1001C
The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your current lint filter with this part. The frame of this line filter is made of white plastic, and the filter is sold individually. To replace the filter, simply remove the old, damaged filter, and replace it with the new one.
Fixes these symptoms
Your Price
$112.91
  In Stock
PARTS ASSEMBLY, SVC (2 Pack)
★★★★★
★★★★★
1 Review
PartSelect Number PS16763594
Manufacturer Part Number AGM75510755
The drum roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter. Over time, these rollers can become worn, and it may cause your dryer to be noisy during operation. The bearing inside this roller is self-lubricating, so no grease will be required.
Fixes these symptoms
Your Price
$80.88
  In Stock
Dryer Lint Filter
★★★★★
★★★★★
12 Reviews
PartSelect Number PS3527578
Manufacturer Part Number 5231EL1003B
This part has the felt strip and is used to collect lint as it passes through the dryer vent. The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice that your dryer is not providing enough heat, or if it takes too long to dry, you may need to replace the lint filter. You should also replace the lint filter if you notice it is damaged during regular maintenance. Many of our customers have rated this repair as easy. To complete the repair, simply remove the old lint filter and replace it with the new one. You may want to use a flat head screwdriver to remove any residual lint before you install the new filter.
Your Price
$71.05
  In Stock
Lint Screen Housing
★★★★★
★★★★★
1 Review
PartSelect Number PS3534930
Manufacturer Part Number MCK49049101
This is an authentic dryer lint filter cover sourced directly from the manufacturer. It protects the more delicate lint filter in your dryer, so that it doesn’t get damaged and lint can’t mix in with your clothes. This product is gray in color and is made of plastic. It is sold individually. The manufacture has modified the part and suggests replacing the filter guide also. Please see your specific model information to locate the filter guide.
Fixes these symptoms
Your Price
$18.32
  In Stock
FILTER,GREASE
PartSelect Number PS12713651
Manufacturer Part Number 5230W1A012E
Sold individually.
Your Price
$75.48
  In Stock
Door Basket
★★★★★
★★★★★
4 Reviews
PartSelect Number PS7786020
Manufacturer Part Number AAP73631502
This door bin is for refrigerators. Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Your Price
$11.87
  In Stock
ROLLER ASSEMBLY
★★★★★
★★★★★
3 Reviews
PartSelect Number PS12075858
Manufacturer Part Number 4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
Your Price
$72.92
  In Stock
Magnetic Door Plunger
★★★★★
★★★★★
7 Reviews
PartSelect Number PS3618292
Manufacturer Part Number AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door plunger attaches to the inner door panel of the washer. It holds the door open when the washer is not running, and allows the door and tub seal to dry. This prevents mold and mildew from building up. Occasionally, the plastic tabs on the housing can break, and when this happens the part will need to be replaced. You may also notice that your washer lid or door will not close; this can also be a sign of a damaged magnetic door plunger.
Fixes these symptoms
  • Leaking
  • Lid or door won’t close
  • Will Not Start
  • See more...

Appliance Type

Popular LG Models

Below are the most popular LG models we have. Enter your model number in the search box to find your model.