Models > 66513619101

66513619101 Kenmore Trash Compactor - Overview

Sections of the 66513619101

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
15 Inch Compactor Bags - 15 Pack – Part Number: W10165295RP
15 Inch Compactor Bags - 15 Pack
★★★★★
★★★★★
(5)
PartSelect #: PS1964579
Manufacturer #: W10165295RP
These bags will fit most 15" rectangular compactors.
$33.72
  In Stock
Order within the next 11 mins and your part ships today!
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.21
  In Stock
Order within the next 11 mins and your part ships today!
15 Inch White Plastic Compactor Bags - 60 Pack – Part Number: W10165294RB
15 Inch White Plastic Compactor Bags - 60 Pack
★★★★★
★★★★★
(11)
PartSelect #: PS1964577
Manufacturer #: W10165294RB
Plastic compactor bags. 50% post-consumer recycled plastic 3 millimeters thick to protect from tearing. Slip-N-Grip design prevents the bag from slipping into the compactor. Fits 15" rectangular compactors.
  No Longer Available
Foot, Front - Single – Part Number: WPW10001130
Foot, Front - Single
★★★★★
★★★★★
(3)
PartSelect #: PS11747965
Manufacturer #: WPW10001130
Sold Individually.
$9.50
  In Stock
Order within the next 11 mins and your part ships today!
Drive Gear Kit – Part Number: 882699
Drive Gear Kit
★★★★★
★★★★★
(10)
PartSelect #: PS398589
Manufacturer #: 882699
This kit is used for trash compactors. It includes both gears, pin spring, C-ring, ram stop, and ram cam.
$84.44
  In Stock
Order within the next 11 mins and your part ships today!
Touch-up Paint - Black – Part Number: 72032
Touch-up Paint - Black
★★★★★
★★★★★
(1)
PartSelect #: PS385141
Manufacturer #: 72032
16ml
$14.96
  In Stock
Order within the next 11 mins and your part ships today!
15" Compactor Bag Carrier with Easy Grip Handles – Part Number: 13030RP
15" Compactor Bag Carrier with Easy Grip Handles
★★★★★
★★★★★
(1)
PartSelect #: PS1782408
Manufacturer #: 13030RP
Compactor bags are sold separately.
$45.80
  In Stock
Order within the next 11 mins and your part ships today!
Screw – Part Number: WP489478
Screw
PartSelect #: PS11742754
Manufacturer #: WP489478
Sold individually.
$6.91
  In Stock
Order within the next 11 mins and your part ships today!
Directional Switch – Part Number: WP777811
Directional Switch
★★★★★
★★★★★
(3)
PartSelect #: PS11744742
Manufacturer #: WP777811
Used for trash compactors.
$81.80
  On Order
Support Roller Clip – Part Number: WP90296
Support Roller Clip
PartSelect #: PS11746832
Manufacturer #: WP90296
Sold Individually.
$6.84
  In Stock
Order within the next 11 mins and your part ships today!
Range Screw – Part Number: WP3196175
Range Screw
PartSelect #: PS11740982
Manufacturer #: WP3196175
This screw is sold individually. 8-18 x 3/8
$10.26
  In Stock
Order within the next 11 mins and your part ships today!
Rotary Switch Kit – Part Number: 675382
Rotary Switch Kit
PartSelect #: PS382679
Manufacturer #: 675382
This kit comes with an on-off rotary switch and two chrome knobs.
$196.31
  Special Order

Questions And Answers for 66513619101

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerald
January 31, 2023
how do tighten the chain on this model
For model number 66513619101
PartSelect logo
Hi Gerald, thank you for getting in touch. If continual derailment of the chain is a problem, inspect both sprockets for worn or missing teeth. Inspect the gearbox mounting and mounting plate. If the mounting screws are loose, gearbox movement may be the cause. If the gearbox mounting plate is bent where it meets the motor trunnion, either straighten it or replace the gearbox. Some chain looseness is normal and may increase as the compactor is used. Seldom does the chain "stretch" to the point where it is too loose. If it does not help, you will need to replace the drive chain with part number PS386870. We hope this helps, good luck with this repair.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the 66513619101

[Viewing 7 of 7]
Doesn’t stop at end of compacting cycle
Fixed by
these parts
Fixing Fixing Fixing
Show All
Compactor ram gets stuck
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drawer is hard to open and or close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Light not working
Fixed by
these parts
Fixing
Show All
Won’t stay on
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Compactor stuck in lower position
Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way.
Removed the drive gear and the washer.
Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
Parts Used:
Powerscrew Cap Drive Gear Kit Washer BEARING
  • Asbjorn from The Woodlands, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
67 of 82 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trash Compactor ram wouldn't lower
I pulled the trash compactor out from under the counter.

I took out the four screws that kept the top cover in place to expose the ram.

The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical directional\limit switch at the top that controlled the power and direction the gear shafts were turning, this switch was broken.

Just had to take off the front plate that was held on by a number of screws and replace the switch that was held on by two more screws. It had five wires attached to it, the new switch was clearly labeled as to which color wire went where.
Parts Used:
Directional Switch
  • Scott from Indianapolis, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
41 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
Touch-Up Paint - White
  • Michelle from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
65 of 130 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!