Models > ADE7005AYW

ADE7005AYW Admiral Dryer - Overview

Sections of the ADE7005AYW

[Viewing 6 of 6]

Manuals & Care Guides for ADE7005AYW

Click to download
Keep searches simple, eg. "belt" or "pump".
Multi Rib Belt – Part Number: WP40111201
Multi Rib Belt
★★★★★
★★★★★
(29)
PartSelect #: PS11742271
Manufacturer #: WP40111201
This dryer drum belt from Amana has five ridges and is 93-3/8" inches in length, and 3/8 of an inch wide. It is flat, black in color, and is made entirely of rubber.
$12.00
  In Stock
Drum Support Roller – Part Number: WP37001042
Drum Support Roller
★★★★★
★★★★★
(7)
PartSelect #: PS11741913
Manufacturer #: WP37001042
This single drum support roller is used for square ported model clothes dryers. It has a metallic bearing in its center.
$26.63
  In Stock
Drum Glide – Part Number: WP37001298
Drum Glide
★★★★★
★★★★★
(2)
PartSelect #: PS11741931
Manufacturer #: WP37001298
$18.02
  In Stock
Door Catch Kit – Part Number: LA-1003
Door Catch Kit
★★★★★
★★★★★
(9)
PartSelect #: PS2162263
Manufacturer #: LA-1003
This kit comes in two pieces: the catch and the clip.
$41.11
  In Stock
Dryer Idler Assembly – Part Number: WP37001287
Dryer Idler Assembly
★★★★★
★★★★★
(4)
PartSelect #: PS11741930
Manufacturer #: WP37001287
The spring for this part is sold separately. This idler assembly is for dryers. Idler assembly includes the idler arm and the idler pulley that maintains tension on the drive belt, allowing the ...
$45.37
  In Stock
Lint Filter – Part Number: WP37001142
Lint Filter
★★★★★
★★★★★
(1)
PartSelect #: PS11741919
Manufacturer #: WP37001142
Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.
$93.32
  In Stock
High Limit Thermal Fuse – Part Number: WP40113801
High Limit Thermal Fuse
★★★★★
★★★★★
(1)
PartSelect #: PS11742274
Manufacturer #: WP40113801
Meant as a backup to a high limit thermostat, this fuse is typically set to trip at a higher temperature than that of a high limit thermostat. This is a one-time use fuse, so when it does trip, you do...
$16.48
  In Stock
Door Switch Kit – Part Number: W10169313
Door Switch Kit
★★★★★
★★★★★
(8)
PartSelect #: PS1964648
Manufacturer #: W10169313
This part replaces older two terminal switches.
$38.07
  In Stock
Thrust Washer – Part Number: WP233520
Thrust Washer
PartSelect #: PS11740482
Manufacturer #: WP233520
This washer is 3/4 inches in diameter.
$10.11
  In Stock
Cylinder Felt Seal – Part Number: WP37001132
Cylinder Felt Seal
★★★★★
★★★★★
(2)
PartSelect #: PS11741917
Manufacturer #: WP37001132
This part is located between the back of the drum and the rear dryer panel.
$61.71
  In Stock
Cylinder Glide Bracket – Part Number: WP37001036
Cylinder Glide Bracket
PartSelect #: PS11741912
Manufacturer #: WP37001036
These brackets support each side of the tub. Order quantity needed.
$77.20
  In Stock
Single Drum Glide Felt Pad – Part Number: WP500121
Single Drum Glide Felt Pad
★★★★★
★★★★★
(1)
PartSelect #: PS11742773
Manufacturer #: WP500121
This dryer drum glide pad is an inch long. It is made of a felt material and is used for gas and electric clothes dryers.
$10.18
  In Stock

Questions And Answers for ADE7005AYW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
December 7, 2022
Took apart to replace the belt. Now a rubber or foam round gasket came off from somewhere. It's about 65inches long.
For model number ADE7005AYW
PartSelect logo
Hello Robert, thank you for contacting us. That part is a cylinder felt seal, part number PS11741917. We have attached a video for the installation of your part, it may help you fix it. We hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Gary
May 29, 2024
No heat, delicate or regular
For model number ADE7005AYW
PartSelect logo
Hi Gary, thank you for getting in touch. Based on our understanding of the issue, we would suggest you replacing the thermal fuse, part number PS11742274, to fix the issue. Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Doug
April 7, 2023
How do I replace the motor drive pulley?
For model number ADE7005AYW
PartSelect logo
Hi Doug, thank you for reaching out. We have searched and attached a video that will help you with replacing it. We hope this helps!

Was this helpful?
Thank you for voting!
Redentor
March 9, 2024
The dryer does not heat up just barely. Everything is working except no heat. When I open the door the light will go on just one a second and then off.
For model number ADE7005AYW
PartSelect logo
Hi Redentor, thank you for the question. We have concluded that the issue is with the thermal fuse, part number PS11742274, we would recommend checking it to fix the issue. Good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the ADE7005AYW

[Viewing 9 of 9]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drum not centered , clothes getting stuck in dryer
The first thing I did was to unplug the dryer from the wall. Then I removed the bottom two screws and slid the bottom cover off so i could see all the way to the back, I tipped the dryer back against the wall and searched for the problem with a flashlight. I noticed that one of the guide wheels that held the drum in place was sheared off. I took the new drum support roller out and carefully slid it over the shaft, I had to jiggle it around for a bit, but then it finally was seated correctly. I replaced the washer and then the clip using a pair of needle nose pliers and a regular screw driver and then turned the dryer by hand to see if the wheel came off. After confirming that it worked, I put the cover back on, and plugged it in and tested it.
Parts Used:
Drum Support Roller Thrust Washer
  • Chris from Hopedale, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
523 of 546 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Felt Gasket between drum and door ripped, vent manifold from Dryer to fan and lint screen broken
I pulled the bottom panel and the door panel to replace the manifold and felt gasket around the drum. I removed old gasket very easily, it peeled right off. I use brake cleaning fluid (Spray Can from Auto Zone about $1.45) to remove old glue. Used spray contact cement (Elmer's about 4.50 at Ace) and sprayed the panel and gasket surfaces and let dry. I then applied a 2nd coat and let get "tacky" and installed the gasket. You will need an extra set of hands to hold the gasket in place while you stretch it over the the panel. The vent manifold is held in place with 3 phillips screws and was installed in about 10 minutes. The only gripe I had was in the Parts-Select illustrated breakdown they don't tell you the lint screen comes with the manifold assembly, so I bought one of them too. Now have an extra lint screen
Parts Used:
Lint Duct Assembly Cylinder Felt Seal Lint Filter
  • Tim from South Glens Falls, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
498 of 504 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squeeling and grinding noise
Wasn't the belt!! Changed it anyway. Should have come here earlier. That mistake added several days to the repair waiting for a second batch of the right parts. Became a pro at taking the dryer apart and reassembling, though! Easy job, just take your time and mark your wires, if you need to.
Followed other people's excellent instructions. Clean out all the dust bunnies. Schematics were a great resource. Those and the prices made me a repeat customer.
The shaft of the Idler Lever wheel was the cause, but decided, since I had it apart, to spend a little more money and replace both Drum Support Rollers and the Roller Bracket and Shaft Assembly. They showed some wear, and the parts were very inexpensive. Make sure you have snap ring pliers with prongs that are smaller than the standard 0.40 to save some aggravation with the Drum Rollers. $5 tool. Total parts were less than $60. Probably saved $150+ in labor. Quieter than ever now. Thanks!
Parts Used:
Drum Support Roller and Shaft Assembly Dryer Idler Assembly Drum Support Roller Single Drum Glide Felt Pad
  • Steven from Holderness, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
482 of 497 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!