Models > DBXR463ED2WW

DBXR463ED2WW General Electric Dryer - Overview

Sections of the DBXR463ED2WW

[Viewing 4 of 4]

Manuals & Care Guides for DBXR463ED2WW

Click to download
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White (Sold individually) – Part Number: WE1M504
Drum Bearing Slide - White (Sold individually)
★★★★★
★★★★★
(34)
PartSelect #: PS755842
Manufacturer #: WE1M504
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
$11.80
  Special Order
Drum Bearing Slide - Green (Sold individually) – Part Number: WE1M1067
Drum Bearing Slide - Green (Sold individually)
★★★★★
★★★★★
(6)
PartSelect #: PS6447706
Manufacturer #: WE1M1067
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
$20.17
  Special Order
Front Drum Bearing – Part Number: WE3M26
Front Drum Bearing
★★★★★
★★★★★
(27)
PartSelect #: PS960316
Manufacturer #: WE3M26
This drum bearing helps your dryer operate as quietly as possible.The drum slides should also be replaced when replacing the drum bearing. The slides are NOT included with this part this is the bearin...
$41.20
  Special Order
Drive Belt – Part Number: WE03X29897
Drive Belt
★★★★★
★★★★★
(16)
PartSelect #: PS16542496
Manufacturer #: WE03X29897
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$38.35
  Special Order
Timer Knob – Part Number: WE1M654
Timer Knob
★★★★★
★★★★★
(8)
PartSelect #: PS1482197
Manufacturer #: WE1M654
This timer knob is white with a silver trim, and is roughly 3 inches in diameter. It accepts a D-shaped shaft.
$30.52
  Special Order
D-Shaped Knob Clip – Part Number: WH01X10106
D-Shaped Knob Clip
★★★★★
★★★★★
(4)
PartSelect #: PS268493
Manufacturer #: WH01X10106
Sold individually.
$11.45
  Special Order
Interlock Switch – Part Number: WD21X10261
Interlock Switch
★★★★★
★★★★★
(13)
PartSelect #: PS1481922
Manufacturer #: WD21X10261
This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.
$33.12
  Special Order
Rotary Start Switch – Part Number: WE4M519
Rotary Start Switch
★★★★★
★★★★★
(5)
PartSelect #: PS3487203
Manufacturer #: WE4M519
This part is used to start the dryer once you have selected a setting on the timer. The terminal locations on the new switch may be different, match up terminal numbers from old switch to new.
$42.65
  Special Order
Drum Bearing Sleeve – Part Number: WE1M462
Drum Bearing Sleeve
★★★★★
★★★★★
(1)
PartSelect #: PS266777
Manufacturer #: WE1M462
Sold individually.
$9.84
  Special Order
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(2)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This part helps to keep the door closed while the machine is running.
$14.47
  Special Order
Door Strike – Part Number: WE1X1192
Door Strike
★★★★★
★★★★★
(3)
PartSelect #: PS266893
Manufacturer #: WE1X1192
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
$10.87
  Special Order
Rear Drum Bearing Kit – Part Number: WE25M40
Rear Drum Bearing Kit
★★★★★
★★★★★
(2)
PartSelect #: PS267529
Manufacturer #: WE25M40
This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running as smoothly as poss...
  No Longer Available

Questions And Answers for DBXR463ED2WW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
March 4, 2022
My repair man said to replace the 4 glides (part # WE1M504) along with the bearing. In reading other info on your site, I read about white vs green glides. It is possible to only need to replace the white glides as was suggested?
For model number DBXR463ED2WW
PartSelect logo
Hello Stephen, Thank you for the question. For this model you will need to replace two of the Green and two of the White (one on each side). They are sold individually and when replacing one, all four should be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Raymond
August 4, 2023
Hello, My GE dryer makes a ratcheting noise upon start up and with a full load. I have replaced the front and rear bearings, front bearing glides, belt and felt. Not much difference. It sounds exactly like the noise in You Tube video /www.youtube.com/watch?v=75jC3djiWmI Do you know what part is causing this? Thank you.
For model number DBXR463ED2WW
PartSelect logo
Hi Raymond, thank you for the question. To fix the issue, we would recommend checking the idler pulley, part number PS265721. The idler pulley puts tension on the drum belt to keep it from slipping while the dryer is spinning. Friction build-up can cause the pulley to wear out and is often responsible for a ratcheting noise. We hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Larry
November 29, 2023
Dryer runs when you hold start button. Quits when let go of start button. Belt is good and in place. Thanks for your info .
For model number DBXR463ED2WW
PartSelect logo
Hi Larry, Thank you for your question. If you have to hold the start button to for the dryer to run, the issue is with the motor and it will have to be replaced. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Dennis
February 16, 2024
Hello! Will all the parts under “DBXR463ED2WW” fit serial number “ZH798599A”? Great video on the bearing replacement. I have a similar issue with my old dryer. Thanks!
For model number DBXR463ED2WW
PartSelect logo
Hello Dennis, Thank you for writing. This model only shows the one option for the parts and will fit all serial options. Happy to hear the video was helpful!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sue
December 4, 2019
Could you please provide the cu ft for my washer? I'm unable to find this information anywhere. Thank you!
For model number DBXR463ED2WW
PartSelect logo
Hello Sue and thanks for writing. For your convenience, we have attached the link to the manual. We hope this helps. Please contact us anytime. https://partselectcom.azureedge.net/assets/manuals/8305BB90E4E83829496E82FDF1513D02998B537E.pdf

Was this helpful?
Thank you for voting!
  • 1
  • 2

Common Symptoms of the DBXR463ED2WW

[Viewing 9 of 9]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Timer Not Working
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Due to over loading of the dryer the drum ruined the slides and was making a bad noise due to plastic rubbing plastic
It was pretty easy. After already taking apart the dryer to install a new belt I knew exactly my plan of action. I removed the two screws that hold the top panel of the dryer to the front panel. I then removed the top panel and removed the screws that hold the front to each side panel. I than pulled the front away from the cabinet and drum. I put the new slides in place and installed a new felt strip. I put it back together and that was that. Very easy.
Parts Used:
Duct Felt Seal Drum Bearing Slide - Green (Sold individually) Drum Bearing Slide - White (Sold individually)
  • Matthew from Plainfield, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
793 of 902 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was squeeling when running.
I removed the two screws at the front above the drum opening (with the dryer door open). The top panel then lifts off. I removed the screw at each side that holds the front panel to the side panels, tilted the front panel forward, which disengages the front of the drum from the front drum glide bearing. I then lifted the front panel slightly, unhooking the bottom of the panel from the dryer base, and swung the front panel aside. I removed the existing top drum bearing guide, which was disintegrated, and snapped in the new bearing guide, with the nylon slide strips installed in the bearing guide. Next pulled out the old felt strip, and pressed the new one in place. I then put the bottom of the front panel back into the bottom of the dryer front, and while lifting the drum to asure it fit over the bearing guide, pushed the front panel back to a vertical position to mate with the side panels. I then replaced the side panel screws, replaced the top, and replaced the front top panel screws.
Parts Used:
Duct Felt Seal Light Bulb Front Drum Bearing Drum Bearing Slide - White (Sold individually)
  • Daniel from Chicago, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
705 of 794 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Intermittant squeaking noise
Basically, I followed the same steps a prior person posted.
1.Removed the two screws inside the door, on the top part of the opening.
2.Lifted up and removed the top.
3.Removed two screws holding the front panel in place.
4.Held up the drum while removing the front panel. I carefully turned the panel so I could get at the drum bearing without pulling the wires connecting it to the front panel. The wires are not very long, so I had to be careful not to pull on them.
5.Carefully pried off the old drum bearing, using just my hands. It was fairly tight, and popped out just as I started to worry if I was putting too much pressure on it.
6.Checked to see how the old felt was installed, then I pulled out the old felt.
7.Inserted the new felt, being careful to insert one end into a slot the same way the original was installed.
8.Inserted the new slides into the new drum bearing. The gray slides went in at the eleven and one o'clock positions, the white slides went in at ten and two o'clock.
9.Removed a surplus plastic piece from the new drum bearing (where the light comes through).
10.Inserted the new drum bearing, putting the bottom tabs in first, then pivoting it into place. I squeezed it into place to make sure it was tight.
11.Lifted up the drum and put the front panel back on.
12.Screwed the front panel back on, using the two screws.
13.Carefully put the top back on.
14.Screwed in the two screws inside the front door to fasten down the top.
That was it! I started up the dryer and it worked fine. No more squeaking.
About the only thing odd about the repair is why PartSelect sells each slide separately (i.e., I had to order 2 white slides and 2 gray slides). I can't imagine replacing just one, so why not package them in pairs, or maybe even all four in one package.
At any rate, the repair was easy, and a lot cheaper than having someone come out to fix it.
Parts Used:
Front Drum Bearing Duct Felt Seal Drum Bearing Slide - Green (Sold individually) Drum Bearing Slide - White (Sold individually)
  • Mark from Addison, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
622 of 774 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!