Models > DHDVH52EF0WW

DHDVH52EF0WW General Electric Dryer - Overview

Sections of the DHDVH52EF0WW

[Viewing 7 of 7]

Manuals & Care Guides for DHDVH52EF0WW

Click to download
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White (Sold individually) – Part Number: WE1M504
Drum Bearing Slide - White (Sold individually)
★★★★★
★★★★★
(34)
PartSelect #: PS755842
Manufacturer #: WE1M504
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
$11.80
  Special Order
Drum Bearing Slide - Green (Sold individually) – Part Number: WE1M1067
Drum Bearing Slide - Green (Sold individually)
★★★★★
★★★★★
(6)
PartSelect #: PS6447706
Manufacturer #: WE1M1067
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
$20.17
  Special Order
Drive Belt – Part Number: WE03X29897
Drive Belt
★★★★★
★★★★★
(16)
PartSelect #: PS16542496
Manufacturer #: WE03X29897
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$38.35
  Special Order
Interlock Switch – Part Number: WD21X10261
Interlock Switch
★★★★★
★★★★★
(13)
PartSelect #: PS1481922
Manufacturer #: WD21X10261
This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.
$33.12
  Special Order
Top Bearing – Part Number: WE14M124
Top Bearing
★★★★★
★★★★★
(1)
PartSelect #: PS1766010
Manufacturer #: WE14M124
The drum slides are not included with this part. The top bearing helps your dryer operate as quietly as possible. This part will require two green drum slides and 2 white drum slides.
$96.40
  Special Order
Drum Bearing Sleeve – Part Number: WE1M462
Drum Bearing Sleeve
★★★★★
★★★★★
(1)
PartSelect #: PS266777
Manufacturer #: WE1M462
Sold individually.
$9.84
  Special Order
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(2)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This part helps to keep the door closed while the machine is running.
$14.47
  Special Order
Door Strike – Part Number: WE1X1192
Door Strike
★★★★★
★★★★★
(3)
PartSelect #: PS266893
Manufacturer #: WE1X1192
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
$10.87
  Special Order
Rear Drum Bearing Kit – Part Number: WE25M40
Rear Drum Bearing Kit
★★★★★
★★★★★
(2)
PartSelect #: PS267529
Manufacturer #: WE25M40
This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running as smoothly as poss...
  No Longer Available
High Limit Thermostat - L315-65 – Part Number: WE4M137
High Limit Thermostat - L315-65
★★★★★
★★★★★
(6)
PartSelect #: PS267900
Manufacturer #: WE4M137
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
$33.12
  Special Order
Retainer O-Ring – Part Number: WE1M461
Retainer O-Ring
PartSelect #: PS266776
Manufacturer #: WE1M461
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
$32.62
  Special Order
Light Bulb – Part Number: WE05X20431
Light Bulb
★★★★★
★★★★★
(1)
PartSelect #: PS10063224
Manufacturer #: WE05X20431
This light bulb is used to illuminate your dryer drum when the door is open. It is sold individually.
  No Longer Available

Questions And Answers for DHDVH52EF0WW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
January 4, 2020
This is dave again; i installed a new door switch and checked the wiring; it did the same thing as before and just shuts off after 6 minutes (usually) I then bypassed all the parts available one at a time and it still did the same thing? However, i do notice a slight brownish coloring around 3 small resistors (r121, 122 & 113)on the power board, just above the four terminal plugin (1. White wire door switch common terminal 2. Brown/yellow door switch no terminal & to drum blower motor 3. Purple to idler switch 4. Black to drum lamp.Magellan dryer power pcb part? number 8rf 4b 10204 100 could it be the power board gone bad? if so, would it affect the user interface board & are they sold together or separately? please advise! going out of my mind thanks
For model number DHDVH52EF0WW
PartSelect logo
Hello Dave and thank you for writing. This certainly sound like you have a short on that board. Main power board PS3487192 and yes, it might interfere with the user interface board PS1482259, they are sold separately. You should check the interface board for signs of shortages as both boards could have been damaged. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jeff
September 7, 2023
Dryer is turning on. All lights work, but the tub doesn't start when button is pressed. Front display shows "Drying" timer runs down like normal. Door switch is working normally. Dryer is not getting warm. My first thought is it's motor time.
For model number DHDVH52EF0WW
PartSelect logo
Hi Jeff, thank you for getting in touch. First, you may need to make sure that the start switch is not loose or damaged. If that is not causing the issue, then you may need to check the motor and blower assembly, part number PS11759038, as it is most likely faulty and may need to be replaced. Glad to be of assistance!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dave
December 9, 2019
My GE elect dryer will always turn on when it's cold, but lately it will only stay on for 5 minutes or so. Occasionally, if my wife slams the door (ah!), it will turn on momentarily, would I need the door switch or a thermal fuse, or? The duct is clear and I vacuumed as far up as possible through the back and front with a crevice tool. Please advise, so I may order the correct part(s). Thank you
For model number DHDVH52EF0WW
PartSelect logo
Hello Dave, Thank you for the question. I suggest checking the wiring for the Door Switch PartSelect Number: PS2344321 and ensure it is secure. If the wiring is good, you may need a new switch. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the DHDVH52EF0WW

[Viewing 9 of 9]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Not Heating
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Due to over loading of the dryer the drum ruined the slides and was making a bad noise due to plastic rubbing plastic
It was pretty easy. After already taking apart the dryer to install a new belt I knew exactly my plan of action. I removed the two screws that hold the top panel of the dryer to the front panel. I then removed the top panel and removed the screws that hold the front to each side panel. I than pulled the front away from the cabinet and drum. I put the new slides in place and installed a new felt strip. I put it back together and that was that. Very easy.
Parts Used:
Duct Felt Seal Drum Bearing Slide - Green (Sold individually) Drum Bearing Slide - White (Sold individually)
  • Matthew from Plainfield, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
793 of 902 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LOUD - screeching noise during drying cycle, in all modes of operation.
1. Removed top cap on lid by removing the 3 - phillips screws.
2. removed front digital display panel from PC board.
3. removed bolts with nut-driver on the top of the front panel, removed bottom screws with #2 square bit.
4. removed "snap-in" plastic top bearing ( paying attention to where wiring is routed within this frame.
5. cleaned all areas of plastic and felt debris, installed new bearing, felt, and glides.
6. Re-installed all wiring and panels.

*** make sure to order all of the glides, there should be a total of 4 for the top assembly.
Parts Used:
Duct Felt Seal Top Bearing Drum Bearing Slide - Green (Sold individually) Drum Bearing Slide - White (Sold individually)
  • Bruce from Springfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
246 of 335 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heater element went out
First of all, unplug the dryer. I removed the two screws on the front of the cabinet to remove the top. I then took out the screws to remove the dial panel. Release the belt for the drum through the access hole in the rear of the dryer. Remove the front cover and pull the drum assembly out.

Remove the element disc from the rear of the housing, take note of the the wireing placement. Replace disc and reverse order of disassembly.

This job was easy for me as I am a tinkerer by nature. The hardest part of the whole job was waiting on the part, which by the way was ordered on a Sunday evening and I had the replacement in my hands and back in the dryer running by 1:00 PM on the following Tuesday!

I book marked this website and WILL refer it to others who simply need a repair, not a costly new appliance!
Parts Used:
Heating Element and Housing
  • Brian from Clinton, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
184 of 219 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!