Models > DLE1101W

DLE1101W LG Dryer - Overview

Sections of the DLE1101W

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
PARTS ASSEMBLY, SVC (2 Pack) – Part Number: AGM75510755
PARTS ASSEMBLY, SVC (2 Pack)
★★★★★
★★★★★
(6)
PartSelect #: PS16763594
Manufacturer #: AGM75510755
The drum roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter...
$163.39
  In Stock
Thermal Fuse – Part Number: 6931EL3003D
Thermal Fuse
★★★★★
★★★★★
(6)
PartSelect #: PS3530485
Manufacturer #: 6931EL3003D
It is used in dryers.
$51.93
  In Stock
Moisture Sensor – Part Number: 6500EL3001A
Moisture Sensor
★★★★★
★★★★★
(2)
PartSelect #: PS3529161
Manufacturer #: 6500EL3001A
$28.41
  In Stock
Dryer Drum Belt – Part Number: 4400EL2001F
Dryer Drum Belt
★★★★★
★★★★★
(3)
PartSelect #: PS11705916
Manufacturer #: 4400EL2001F
This belt helps rotate from the drive motor to the drum.
$81.30
  In Stock
Dryer Lint Filter Assembly – Part Number: 5231EL1001C
Dryer Lint Filter Assembly
★★★★★
★★★★★
(5)
PartSelect #: PS3527575
Manufacturer #: 5231EL1001C
The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your cur...
$77.25
  In Stock
High Limit Thermostat and Thermistor Kit – Part Number: AGM30045804
High Limit Thermostat and Thermistor Kit
PartSelect #: PS16878105
Manufacturer #: AGM30045804
This thermistor is used in dryer
$114.11
  In Stock
Dryer Thermistor – Part Number: 6323EL2001B
Dryer Thermistor
★★★★★
★★★★★
(1)
PartSelect #: PS3529026
Manufacturer #: 6323EL2001B
This thermistor is used in dryer
$43.85
  In Stock
Felt Seal – Part Number: 4036EL3001A
Felt Seal
★★★★★
★★★★★
(1)
PartSelect #: PS3522851
Manufacturer #: 4036EL3001A
$61.79
  In Stock
Blower Thermostat – Part Number: 6931EL3002M
Blower Thermostat
★★★★★
★★★★★
(2)
PartSelect #: PS8747887
Manufacturer #: 6931EL3002M
$58.57
  In Stock
COVER,GUIDE – Part Number: 3550EL1005C
COVER,GUIDE
★★★★★
★★★★★
(1)
PartSelect #: PS12368455
Manufacturer #: 3550EL1005C
$72.54
  In Stock
Pulley,Idle – Part Number: 4560EL3001A
Pulley,Idle
PartSelect #: PS3523032
Manufacturer #: 4560EL3001A
$44.79
  In Stock
Side Venting Kit – Part Number: 3911EZ9131X
Side Venting Kit
★★★★★
★★★★★
(1)
PartSelect #: PS3575086
Manufacturer #: 3911EZ9131X
$248.08
  In Stock

Questions And Answers for DLE1101W

Ask our experts a question about this model and we'll get back to you as soon as possible!

10 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Teri
February 8, 2020
Where is moisture sensor located so i can wipe it off which is something i have never done.I have had this dryer for several years
For model number DLE1101W
PartSelect logo
Hello Teri, Thank you for your question. The moisture sensor for your model is under part PS3529161 and to access this part, you will need to remove the front bulk head. To remove this, you will need to remove the screws securing the top. Uninstall the screws that support the control panel and lift. Remove screws holding the support bracket in place so you can detach this piece. Detach the wire harness and remove the wire, then set the bracket aside. You will now open the dryer door and release it by taking out the bottom two screws. Disconnect the wire harness and moisture sensor wire harness, remove screws from front bulk head, and remove screws that secure the duct housing. You should be able to completely remove the bulk head. You will find the sensor underneath the lint filter grill, which will also need to be removed. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Laurie
December 13, 2019
I need to replace the thermal fuse in my LG dle1101w. The videos are all for a different model. Could you please tell me how to get to the location of this part? I can't figure out how ow to remove the top of the dryer.Thank you. laurie
For model number DLE1101W
PartSelect logo
Hi Laurie, this video may be more helpful here: https://www.youtube.com/watch?v=NeAKCxYDGDg. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ron
December 17, 2019
My LG dryer model# lgdle1101w will not shut off. We ran the diagnostics with the phone to no avail. The only way to stop the dryer is to unplug it. Plug it back in and starts fine will not turn off. Recommendations please.
For model number DLE1101W
PartSelect logo
Hello Ron and thanks for writing. The issue might be the door trigger. Before you go to crazy, keep the door open and press the trigger latch for the door. If you're lucky it will stop the cycle. Door switch # PS3529308 & door catch PS3522845. It is recommended to replace both parts at the same time. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
Related Parts:
Ron
December 17, 2019
The dryer won't shut off unless i unplug it or open the door. Starts fine. What do i need to look at? I looked at other questions and it appears to be a110 or a120 in the diagram. Please advise with recommended parts.
For model number DLE1101W
PartSelect logo
Hello Ron and thanks for writing. It certainly sounds like a faulty door switch PS3529308 check for signs of damage and replace it if needed. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
Related Parts:
Steve
March 26, 2020
Dryer will power on, but does not spin or dry. When I did the app to diagnosis the issue it says there is an issue with the voltage. I checked the voltage and it was fine. 2 weeks ago dryer was working properly.
For model number DLE1101W
PartSelect logo
Hello Steve, Thank you for the question. We suggest testing the Drive Motor, PartSelect Number PS3523290. Here is a link with information on testing the motor. We hope this helps. https://www.partselect.com/Dryer+test-motor+repair.htm

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2

Common Symptoms of the DLE1101W

[Viewing 5 of 5]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer making a thumping and squealing noise when running
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
Parts Used:
PARTS ASSEMBLY, SVC (2 Pack)
  • Mark from WAVERLY, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable), Wrench set
87 of 108 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would run with no heat
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Parts Used:
Thermal Fuse
  • Richard from ORMOND BEACH, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
68 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screeching during operation
Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piece of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....
Parts Used:
PARTS ASSEMBLY, SVC (2 Pack)
  • CAROL from NAMPA, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
36 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!