Models > DLE5955W

DLE5955W (ABWEEUS) LG Dryer - Overview

Sections of the DLE5955W

[Viewing 3 of 3]

Manuals & Care Guides for DLE5955W

Click to download
Keep searches simple, eg. "belt" or "pump".
PARTS ASSEMBLY, SVC (2 Pack) – Part Number: AGM75510755
PARTS ASSEMBLY, SVC (2 Pack)
★★★★★
★★★★★
(6)
PartSelect #: PS16763594
Manufacturer #: AGM75510755
The drum roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter...
$163.39
  In Stock
Dryer Lint Filter – Part Number: 5231EL1003B
Dryer Lint Filter
★★★★★
★★★★★
(12)
PartSelect #: PS3527578
Manufacturer #: 5231EL1003B
This part has the felt strip and is used to collect lint as it passes through the dryer vent. The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice t...
$84.67
  In Stock
Thermal Fuse – Part Number: 6931EL3003D
Thermal Fuse
★★★★★
★★★★★
(6)
PartSelect #: PS3530485
Manufacturer #: 6931EL3003D
It is used in dryers.
$51.93
  In Stock
Moisture Sensor – Part Number: 6500EL3001A
Moisture Sensor
★★★★★
★★★★★
(2)
PartSelect #: PS3529161
Manufacturer #: 6500EL3001A
$28.41
  In Stock
Dryer Drum Belt – Part Number: 4400EL2001F
Dryer Drum Belt
★★★★★
★★★★★
(3)
PartSelect #: PS11705916
Manufacturer #: 4400EL2001F
This belt helps rotate from the drive motor to the drum.
$81.30
  In Stock
High Limit Thermostat and Thermistor Kit – Part Number: AGM30045804
High Limit Thermostat and Thermistor Kit
PartSelect #: PS16878105
Manufacturer #: AGM30045804
This thermistor is used in dryer
$114.11
  In Stock
Dryer Thermistor – Part Number: 6323EL2001B
Dryer Thermistor
★★★★★
★★★★★
(1)
PartSelect #: PS3529026
Manufacturer #: 6323EL2001B
This thermistor is used in dryer
$43.85
  In Stock
Felt Seal – Part Number: 4036EL3001A
Felt Seal
★★★★★
★★★★★
(1)
PartSelect #: PS3522851
Manufacturer #: 4036EL3001A
$61.79
  In Stock
Blower Thermostat – Part Number: 6931EL3002M
Blower Thermostat
★★★★★
★★★★★
(2)
PartSelect #: PS8747887
Manufacturer #: 6931EL3002M
$58.57
  In Stock
Pulley,Idle – Part Number: 4560EL3001A
Pulley,Idle
PartSelect #: PS3523032
Manufacturer #: 4560EL3001A
$44.79
  In Stock
Thermostat Assembly – Part Number: 6931EL3001F
Thermostat Assembly
PartSelect #: PS3530482
Manufacturer #: 6931EL3001F
$69.58
  In Stock
Leg – Part Number: 4778EL3001B
Leg
PartSelect #: PS3523560
Manufacturer #: 4778EL3001B
This plastic adjustable dryer leg is used to support the weight and adjust the height of your dryer to keep it level. To install the leg, tip the dryer back and screw it into the bottom of your dryer ...
$13.95
  In Stock

Questions And Answers for DLE5955W

Ask our experts a question about this model and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
December 29, 2022
Sensor flow light is on….what does that mean?
For model number DLE5955W
PartSelect logo
Hello Mary, thank you for your question. To fix the flow sense error on your LG dryer, check whether lint filter could be clogged with lint. If the dryer filter is clogged with lint, the appliance will detect some air blockage. To clean, pull the lint filter straight up and roll any lint off the filter with your fingers. Push the lint filter firmly back into place. We hope this helps.

Was this helpful?
Thank you for voting!
John
January 28, 2024
Dryer is loud when in use. Are there belts that could cause this?
For model number DLE5955W
PartSelect logo
Hi John, thank you for reaching out. Based on our understanding, the issue could be with the dryer drum belt, part number PS11705916. It attaches to the motor pulley and spins the drum as the motor rotates. You may need to replace it to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Carolyn
24 days ago
I get an error message as soon as I turn it on. TE1
For model number DLE5955W
PartSelect logo
Hi Carolyn, thank you for the question. According to our research, the TE1 error code indicates a problem related to the thermistor. We would suggest checking the wire harness of the thermistor first. If it is fine, you may need to replace the high limit thermostat and thermistor kit, part number PS16878105. It monitors and helps regulate the dryer temperatures. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Bob
August 31, 2022
Control panel assembly
For model number DLE5955W
PartSelect logo
Hi Bob, Thank you for your question. The part number listed under your model number for the control panel assembly is PS3532462. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the DLE5955W

[Viewing 5 of 5]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer making a thumping and squealing noise when running
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
Parts Used:
PARTS ASSEMBLY, SVC (2 Pack)
  • Mark from WAVERLY, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable), Wrench set
87 of 108 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would run with no heat
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Parts Used:
Thermal Fuse
  • Richard from ORMOND BEACH, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
68 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer not heating
I followed video instruction in disassembling and set screws from each section into diferent small bowls in the order they were removed. Hardest part was some of the screws were really hard to get loose without stripping them and my control panel did not match video but I figured it out. Replacing the parts were easy and putting it back together. While it was apart I cleaned everything including fan blower wheel. Thanks for the right parts and your online video. With your help and a prayer this 62 year old woman fixed the problem and dryer runs like new.
Parts Used:
Blower Thermostat Thermostat Assembly Moisture Sensor Dryer Thermistor Dryer Lint Filter
  • Sheryl from SPRINGFIELD, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
49 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!