Models > EVL201NXRQ00

EVL201NXRQ00 Whirlpool Freezer - Overview

Sections of the EVL201NXRQ00

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
  In Stock
Refrigerator Door Switch – Part Number: W11384469
Refrigerator Door Switch
★★★★★
★★★★★
(28)
PartSelect #: PS12728638
Manufacturer #: W11384469
Door switch turns the light off when you close the door.
$48.82
  In Stock
Fan Blade and Spring Clip – Part Number: WPW10445742
Fan Blade and Spring Clip
★★★★★
★★★★★
(5)
PartSelect #: PS11754833
Manufacturer #: WPW10445742
This blade attaches to the evaporator fan motor.
$20.52
  In Stock
Freezer Door Key – Part Number: WP4356840
Freezer Door Key
★★★★★
★★★★★
(1)
PartSelect #: PS11742410
Manufacturer #: WP4356840
Sold individually.
$17.74
  Special Order
Screw – Part Number: WP489478
Screw
PartSelect #: PS11742754
Manufacturer #: WP489478
Sold individually.
$6.88
  In Stock
Defrost Timer – Part Number: WP3-81329
Defrost Timer
★★★★★
★★★★★
(1)
PartSelect #: PS11740630
Manufacturer #: WP3-81329
This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
$169.74
  In Stock
Evaporator Fan Motor – Part Number: WP3-60336-001
Evaporator Fan Motor
PartSelect #: PS11740626
Manufacturer #: WP3-60336-001
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
$313.07
  In Stock
Screw – Part Number: WP3-24838-048
Screw
PartSelect #: PS11740623
Manufacturer #: WP3-24838-048
Sold individually.
$8.64
  In Stock
40 WATT REFRIGERATOR BULB – Part Number: W11679940
40 WATT REFRIGERATOR BULB
PartSelect #: PS17216393
Manufacturer #: W11679940
Substituted with part number PS869887.
$11.31
  In Stock
Spray Paint - 12 oz. - White – Part Number: 350930
Spray Paint - 12 oz. - White
PartSelect #: PS347819
Manufacturer #: 350930
$27.89
  On Order
Screw -  8-32 X 1-1/4 – Part Number: WP488163
Screw - 8-32 X 1-1/4
PartSelect #: PS11742712
Manufacturer #: WP488163
Sold individually.
$9.67
  In Stock
Rail – Part Number: WP4-65451-001
Rail
PartSelect #: PS11742225
Manufacturer #: WP4-65451-001
$70.92
  In Stock

Questions And Answers for EVL201NXRQ00

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Heather
August 27, 2021
How do I replace the evaporator fan motor?
For model number EVL201NXRQ00
PartSelect logo
Hello heather, Thank you for the question. Here is a Link to a How to Video on replacing the Fan Motor. We hope this helps! https://www.youtube.com/watch?v=Hj_ojPQebcw

Was this helpful?
Thank you for voting!
Anita
January 29, 2023
Freezer indicator light in the toe kick grille flickers off and on. Freezer seems to be working. What does this mean for freezer function?
For model number EVL201NXRQ00
PartSelect logo
Hello Anita, thank you for writing. The freezer's red light will turn on when it is not cold enough. This means the freezer is not be suitable for storing frozen food until the light has turned off. We suggest checking the settings and if the appliance is set to the proper temperature, we suggest checking to make sure the fans are running to circulate the air. You can also test the Defrost Thermostat. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. We hope this is helpful!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the EVL201NXRQ00

[Viewing 4 of 4]
Light not working
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Too warm
Fixed by
these parts
Fixing Fixing
Show All
Frost buildup
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Parts Used:
Refrigerator Door Switch
  • Clint from Rayville, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
121 of 203 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Froze over fan motor burnt out
Removed shelves from inside freezer then removed 4 screws holding cover panel. Pulled panel up and slightly pulled forward to remove. Removed wiring connections then removed two screws that held the motor & fan assembly. Removed the support bracket from the old motor and installed same on the support bracket. Reversed removal procedures for installation. Cover panel is a little bit of a problem when trying to reinstall. Put in panel as high as you can and then slide down. You must then exert a little pressure on the bottom portion to get it to seat correctly. Install four remaing screws and you are done. I had this repaired previously by a professional repairman and noticed from the pictures you folks provided that he had installed the screws on the support bracket incorrectly. That was the reason for the fan blade to rip apart.
Parts Used:
Evaporator Fan Motor Fan Blade and Spring Clip
  • James L. from Madison, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
70 of 79 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light Switch broke
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.
Parts Used:
Refrigerator Door Switch
  • James Richard from St. Cloud, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
44 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!