Models > FAFS4272LW0

FAFS4272LW0 Frigidaire Washer - Overview

Sections of the FAFS4272LW0

[Viewing 5 of 5]

Manuals & Care Guides for FAFS4272LW0

Click to download
Keep searches simple, eg. "belt" or "pump".
Front Load Washer Door Lock and Switch Assembly – Part Number: 131763256
Front Load Washer Door Lock and Switch Assembly
★★★★★
★★★★★
(36)
PartSelect #: PS12364048
Manufacturer #: 131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the do...
$176.03
  In Stock
Door Striker – Part Number: 131763302
Door Striker
★★★★★
★★★★★
(12)
PartSelect #: PS2378364
Manufacturer #: 131763302
This part is found on the door of your washer and keeps your door closed for use.
$25.71
  In Stock
Door Hinge with Bushings – Part Number: 134550800
Door Hinge with Bushings
★★★★★
★★★★★
(7)
PartSelect #: PS1152380
Manufacturer #: 134550800
This part attaches to the outside of the front door panel to help with the door open and closing properly.
  No Longer Available
Bellow Kit – Part Number: 134515300
Bellow Kit
★★★★★
★★★★★
(7)
PartSelect #: PS1148773
Manufacturer #: 134515300
Also known as a Door Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately f...
$393.85
  In Stock
Screw – Part Number: 131302800
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$16.47
  In Stock
Drum Baffle – Part Number: 134952702
Drum Baffle
★★★★★
★★★★★
(4)
PartSelect #: PS3408272
Manufacturer #: 134952702
Sold individually.
$54.32
  In Stock
Single Shock Mounting Pin – Part Number: 131268300
Single Shock Mounting Pin
PartSelect #: PS417323
Manufacturer #: 131268300
$29.93
  In Stock
Door Glass – Part Number: 134366400
Door Glass
★★★★★
★★★★★
(4)
PartSelect #: PS1145708
Manufacturer #: 134366400
$306.09
  In Stock
Spring-Held Bellow Clamp – Part Number: 134527100
Spring-Held Bellow Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS1146211
Manufacturer #: 134527100
$46.34
  In Stock
SCREW – Part Number: 131168200
SCREW
PartSelect #: PS417085
Manufacturer #: 131168200
Sold individually.
$17.34
  In Stock
Exterior Door Panel - Chrome – Part Number: 5304506743
Exterior Door Panel - Chrome
★★★★★
★★★★★
(1)
PartSelect #: PS11770528
Manufacturer #: 5304506743
The door outer panel is the exterior portion of the door and attaches to the door inner panel.
$309.92
  In Stock
Water Inlet Valve – Part Number: 134637810
Water Inlet Valve
★★★★★
★★★★★
(1)
PartSelect #: PS2349248
Manufacturer #: 134637810
This water inlet valve works with washers
$190.89
  In Stock

Questions And Answers for FAFS4272LW0

Ask our experts a question about this model and we'll get back to you as soon as possible!

7 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nay
January 21, 2023
looking for stacking kit
For model number FAFS4272LW0
PartSelect logo
Hello Nay, thank you for getting in touch. The stacking kit for your model is part number PS3412264. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Joe
March 6, 2023
Water leaks back into tub after turned off
For model number FAFS4272LW0
PartSelect logo
Hello Robert, thank you for contacting us. We would suggest taking a look at your water line first. Make sure it is connected correctly and not broken. Check the valve on the back of the machine to find out if it is leaking. Check it with the multimeter. If this does not help, you need to replace the water inlet valve, part number PS2349248. It allows the water to flow into the tub. We hope this sorts out your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jessica
March 18, 2023
When it comes to replacement parts for front loader washer door specifically, can you find whole door replacements? Or just parts sold individually separate?
For model number FAFS4272LW0
PartSelect logo
Hi Jessica, Glad to hear from you. For this washer, there is no door assembly. The parts are sold individually. If you know what parts on the door need repair, please resubmit your question with this information and we would be happy to assist you. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
William
November 30, 2019
I’m trying to find the rubber gasket/seal that goes on the around the inside of the washing machine. Is that available?
For model number FAFS4272LW0
PartSelect logo
Hi William, this part is linked below. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Related Parts:
Ron
February 2, 2020
Touch pad worn out. Need replacement.
For model number FAFS4272LW0
PartSelect logo
Hi Ron, Thank you for your question. The part number listed under your model number for the touchpad is PS3418963. We hope this helps. Thank you and have a great day.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2

Common Symptoms of the FAFS4272LW0

[Viewing 9 of 9]
Lid or door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door on washer wouldn't lock or start
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Parts Used:
Front Load Washer Door Lock and Switch Assembly
  • DOUG from KING FERRY, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
472 of 554 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Bellow Ripped
remove top of machine by removing 3 screws along the top edge in the back of your machine and then sliding the top back and up. Then loosen the screws holding on the control panel enough to get to the 2 screws at the top of the door panel. Next remove bottom panel by removing 2 screws along bottom edge then pulling it free from snaps. Then along the outside lip of the bellow, just inside the door, is a wire clip that is easily removed by prying it past rubber lip with a screw driver and lifting it away. Remove the door panel by removing the 2 screws you exposed by loosening the control panel and 2 more along the bottom that were exposed when removing bottom panel. After the door panel is removed and the bellow is completely exposed, you will find that it is held in place by a circular spring which wraps the whole way around the drum opening. Again it can be removed by prying it out away from the groove in which it sits with a screw driver. Now your machine is broken down as far as it needs to be. From here you can follow the directions included in your new bellow kit and put it back together by following these instructions in reverse.
Parts Used:
Bellow Kit
  • Peggy from New Castle, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
247 of 340 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not spin
Door lock takes a beating due to flimsy washer door which does not align well and subsequently gets slammed each time which causes lock to malfunction telling the washer that it is not locked. Due to safety the washer will not go into the spin mode. Remove top lid (2 screws) open washer door and loosed the 2 screws holding the lock assembly in place. Reach down into the washer and unsnap the 3 wire harnesses. Reverse to reinstall. Very easy.
Parts Used:
Front Load Washer Door Lock and Switch Assembly
  • Keith from Sayville, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
124 of 140 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!