Models > FAFW4011LW0

FAFW4011LW0 Frigidaire Washer - Overview

Sections of the FAFW4011LW0

[Viewing 5 of 5]

Manuals & Care Guides for FAFW4011LW0

Click to download
Keep searches simple, eg. "belt" or "pump".
Door Strike – Part Number: 131763310
Door Strike
★★★★★
★★★★★
(65)
PartSelect #: PS890617
Manufacturer #: 131763310
The door strike on your washing machine allows your washer door to lock properly, and operate efficiently. If you notice that your washer door will not open or close, leaks or the washer will not star...
$19.58
  In Stock
Front Load Washer Door Lock and Switch Assembly – Part Number: 131763256
Front Load Washer Door Lock and Switch Assembly
★★★★★
★★★★★
(36)
PartSelect #: PS12364048
Manufacturer #: 131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the do...
$176.03
  In Stock
Door Hinge with Bushings – Part Number: 134550800
Door Hinge with Bushings
★★★★★
★★★★★
(7)
PartSelect #: PS1152380
Manufacturer #: 134550800
This part attaches to the outside of the front door panel to help with the door open and closing properly.
  No Longer Available
Outer Door Panel - White – Part Number: 134550500
Outer Door Panel - White
★★★★★
★★★★★
(16)
PartSelect #: PS1152384
Manufacturer #: 134550500
This is not the complete door.
$213.35
  In Stock
Bellow Kit – Part Number: 134515300
Bellow Kit
★★★★★
★★★★★
(7)
PartSelect #: PS1148773
Manufacturer #: 134515300
Also known as a Door Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately f...
$393.85
  In Stock
Dispenser Drawer Handle Frame - White – Part Number: 137314510
Dispenser Drawer Handle Frame - White
★★★★★
★★★★★
(5)
PartSelect #: PS3492783
Manufacturer #: 137314510
$104.06
  In Stock
Screw – Part Number: 131302800
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$16.47
  In Stock
Single Shock Mounting Pin – Part Number: 131268300
Single Shock Mounting Pin
PartSelect #: PS417323
Manufacturer #: 131268300
$29.93
  In Stock
Door Glass – Part Number: 134366400
Door Glass
★★★★★
★★★★★
(4)
PartSelect #: PS1145708
Manufacturer #: 134366400
$306.09
  In Stock
Water Inlet Valve – Part Number: 134959340
Water Inlet Valve
★★★★★
★★★★★
(3)
PartSelect #: PS3490374
Manufacturer #: 134959340
$176.04
  On Order
Inner Door Frame – Part Number: 134550700
Inner Door Frame
★★★★★
★★★★★
(1)
PartSelect #: PS1152379
Manufacturer #: 134550700
This is an OEM inner door frame, which works with washers.
$147.54
  In Stock
Spring-Held Bellow Clamp – Part Number: 134527100
Spring-Held Bellow Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS1146211
Manufacturer #: 134527100
$46.34
  In Stock

Questions And Answers for FAFW4011LW0

Ask our experts a question about this model and we'll get back to you as soon as possible!

5 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
September 7, 2022
Washer had a grinding noise, did not spin as the drum dropped forward and will not stay in place.
For model number FAFW4011LW0
PartSelect logo
Hello Barbara, thank you for reaching out. According to our research on the model, the problem appears to be with the Drive Belt, part number PS3490371. Customer service is available 7 days a week if you need help placing an order. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Brian
May 3, 2023
The front cover on the dispenser drawer came off, looks like a clip broke off. What do I need to buy, is the drawer and cover separate?
For model number FAFW4011LW0
PartSelect logo
Hello Brian, thank you for writing. We suggest checking the Dispenser Drawer Handle Frame for wear or damaged. This part holds the handle (cover) to the Drawer. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Cheryl
May 25, 2023
Water is not entering for washing - I've tried resetting that didn't work & different settings what possibilities could be wrong. Thank you
For model number FAFW4011LW0
PartSelect logo
Hi Cheryl, thank you for reaching out. Based on our understanding of the issue, we would suggest that you check the water inlet valve, part number PS3490374, as it is most likely faulty and may need to be replaced. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Lou
December 3, 2023
I am looking for screw (part 16) Thank you
For model number FAFW4011LW0
PartSelect logo
Hi Lou, thank you for reaching out. The screw that you are looking for is part number PS417147. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Related Parts:
Todd
November 28, 2022
SO ....... for a total change out of ALL the shock absorbers on the model..........do I need a total of TWO individual shock absorbers or a total of FOUR?
For model number FAFW4011LW0
PartSelect logo
Hello Todd, thank you for contacting us. Upon reviewing the model provided, the shock absorbers are available in a set of two, Rear Shock Absorbers, part number PS8689635, and Front Shock Absorbers, part number PS8689636. Four are required on the unit. Good luck with your repair! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the FAFW4011LW0

[Viewing 11 of 11]
Lid or door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Door Catch
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done.
Parts Used:
Door Strike
  • Joy from Columbia, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
564 of 581 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door on washer wouldn't lock or start
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Parts Used:
Front Load Washer Door Lock and Switch Assembly
  • DOUG from KING FERRY, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
472 of 554 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Bellow Ripped
remove top of machine by removing 3 screws along the top edge in the back of your machine and then sliding the top back and up. Then loosen the screws holding on the control panel enough to get to the 2 screws at the top of the door panel. Next remove bottom panel by removing 2 screws along bottom edge then pulling it free from snaps. Then along the outside lip of the bellow, just inside the door, is a wire clip that is easily removed by prying it past rubber lip with a screw driver and lifting it away. Remove the door panel by removing the 2 screws you exposed by loosening the control panel and 2 more along the bottom that were exposed when removing bottom panel. After the door panel is removed and the bellow is completely exposed, you will find that it is held in place by a circular spring which wraps the whole way around the drum opening. Again it can be removed by prying it out away from the groove in which it sits with a screw driver. Now your machine is broken down as far as it needs to be. From here you can follow the directions included in your new bellow kit and put it back together by following these instructions in reverse.
Parts Used:
Bellow Kit
  • Peggy from New Castle, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
247 of 340 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!