Models
>
FCM7DUBWW
FCM7DUBWW General Electric Freezer - Overview
Sections of the FCM7DUBWW
[Viewing 1 of 1]Manuals & Care Guides for FCM7DUBWW
Click to downloadKeep searches simple, eg. "belt" or "pump".
Upper Freezer Basket
PartSelect #: PS2356327
Manufacturer #: WR21X10208
The freezer basket helps organize food in the freezer easier. The basket measures approximately 7 1/2” high by 16.75” deep. The freezer basket is white in color and made of metal. This is a genuine OE...
$46.50
Special Order
Thermostat
PartSelect #: PS2323338
Manufacturer #: WR50X10085
This part helps maintain a constant temperature within the appliance.
$67.92
Special Order
Indicator Light
PartSelect #: PS2322718
Manufacturer #: WR02X12562
This is a two pronged, white and green indicator light.
No Longer Available
Questions And Answers for FCM7DUBWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the FCM7DUBWW
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Freezer temp was either -20 or +30, operation was intermittant
I replaced the thermostat, all but the capillary pipe. It was stuck in the
tube in which it fits. I had to let it sit unplugged until the ice in the cap tube melted, and I was able to lightly jerk on the cap pipe until it came
loose and slipped out. Put in the new one and sealed the end of the
tube with putty.
tube in which it fits. I had to let it sit unplugged until the ice in the cap tube melted, and I was able to lightly jerk on the cap pipe until it came
loose and slipped out. Put in the new one and sealed the end of the
tube with putty.
Parts Used:
-
Thomas A from BLUEMONT, VA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Green light indicator out
Removed cover with screwdriver used pliers unhook wires green light indicator and replaced with new one put cover back.
Parts Used:
-
Alex from PLANO, TX
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing lost Top Lock Cover.
Placed Top Lock cover over the latch mechanism. Then using my hand I put downward pressure on the Top Lock Cover and it snapped into place. The entire installation took less than five minutes.
Best regards,
Micha Sweeney
Best regards,
Micha Sweeney
Parts Used:
-
Michael from CINCINNATI, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!