Models > FEQ332CES0

FEQ332CES0 Frigidaire Dryer - Overview

Sections of the FEQ332CES0

[Viewing 6 of 6]

Manuals & Care Guides for FEQ332CES0

Click to download
Keep searches simple, eg. "belt" or "pump".
Rear Drum Bearing Kit – Part Number: 5303281153
Rear Drum Bearing Kit
★★★★★
★★★★★
(64)
PartSelect #: PS459829
Manufacturer #: 5303281153
This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws.
$71.08
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Timer Knob – Part Number: 131873500
Timer Knob
★★★★★
★★★★★
(22)
PartSelect #: PS418921
Manufacturer #: 131873500
This knob accepts a D-shaped shaft.
$75.30
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Drum Belt – Part Number: 134503600
Drum Belt
★★★★★
★★★★★
(25)
PartSelect #: PS1148434
Manufacturer #: 134503600
This 88 3/4 inches long and 1/4 inch wide dryer drum belt goes around the dryer drum and the pulley to rotate the drum once the motor is activated.
$22.52
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Heating Element Assembly – Part Number: 131553900
Heating Element Assembly
★★★★★
★★★★★
(32)
PartSelect #: PS418120
Manufacturer #: 131553900
This dryer heating and housing assembly has terminals at four o'clock. This E-line assembly comes with a felt strip and insulators already attached.
$216.87
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Drum Support Bearing – Part Number: 131825900
Drum Support Bearing
★★★★★
★★★★★
(7)
PartSelect #: PS418807
Manufacturer #: 131825900
This part attaches onto the inside of the rear panel of the cabinet.
$8.07
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Drum Glide - White – Part Number: 137513300
Drum Glide - White
★★★★★
★★★★★
(3)
PartSelect #: PS5574052
Manufacturer #: 137513300
Appliance requires 2 .Sold individually.
$44.93
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Thermal Limiter - Limit 220 – Part Number: 134120900
Thermal Limiter - Limit 220
★★★★★
★★★★★
(11)
PartSelect #: PS419402
Manufacturer #: 134120900
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.
$34.68
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Rotary Knob – Part Number: 134042800
Rotary Knob
★★★★★
★★★★★
(7)
PartSelect #: PS419266
Manufacturer #: 134042800
This knob accepts a D-shaped shaft.
$74.80
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Lower Front Felt Seal with Adhesive – Part Number: 5303937183
Lower Front Felt Seal with Adhesive
★★★★★
★★★★★
(9)
PartSelect #: PS832645
Manufacturer #: 5303937183
$25.32
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Door Catch – Part Number: 131658800
Door Catch
★★★★★
★★★★★
(4)
PartSelect #: PS418433
Manufacturer #: 131658800
This part helps keep the door closed while the machine is running.
$79.93
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Turn - Type Start Switch – Part Number: 134398300
Turn - Type Start Switch
★★★★★
★★★★★
(13)
PartSelect #: PS975832
Manufacturer #: 134398300
This part is used to start the dryer once you have selected a setting on the timer.
$84.12
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Lint Filter – Part Number: 131450300
Lint Filter
★★★★★
★★★★★
(4)
PartSelect #: PS417841
Manufacturer #: 131450300
This white dryer lint filter screen collects lint as it passes through the dryer vent.
$36.36
  In Stock
Order within the next 1 hr and 17 mins and your part ships today!

Questions And Answers for FEQ332CES0

Ask our experts a question about this model and we'll get back to you as soon as possible!

5 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
December 16, 2021
Dryer is squeaking during it’s cycle.
For model number FEQ332CES0
PartSelect logo
Hello Bob, thank you for writing. If the motor emits a noticeable squeak as it's running, it could be that these bearings are wearing out. Rear Drum Bearing Kit PartSelect Number PS459829. Drum Support Bearing PartSelect Number PS418807. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Bonnie
February 10, 2020
My dryer will not start. Light comes on inside so i know it is not the electric panel. No sound, no engagement, no click, nothing.
For model number FEQ332CES0
PartSelect logo
Hello and thank you for writing. We suggest to try a hard reset: Go to your breaker box and shut the breakers for your unit off, wait 5 minutes and then turn the breaker to on again. That should hopefully clear this problem. If this does not fix this problem then your start switch PS975832 might be faulty and/or possibly a malfunctioning thermal limiter PS419402 possibly needs to be replaced. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
Related Parts:
Gordon
October 30, 2021
Why does the top rear and back of the dryer gets extremely hot to touch after only a few minutes running
For model number FEQ332CES0
PartSelect logo
Hello Gordon, Thankyou for the question. This is normally caused by over heating due to lack of Air Flow. As suggest cleaning out the Exhaust Hoses and the Air Duct. Open up the cabinet and clean out any lint build up in the cabinet as well. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Kathleen
November 14, 2023
I’m not getting any heat all of a sudden. Everything else is working fine. Could this be the heating element.
For model number FEQ332CES0
PartSelect logo
Hello Kathleen, Thank you for your inquiry. It could be the heating element, but we would first recommend checking the high limit thermostat and thermal fuse/limiter (which can blow out if the dryer overheats). You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. The high limit thermostat and thermal fuse should test at 0 ohms or infinity to be working properly. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
Teresa
November 18, 2023
Dryer making creaking or thumping sound Could it be the rollers
For model number FEQ332CES0
PartSelect logo
Hi Teresa, thank you for getting in touch. Based on our understanding, the issue is with the rear drum bearing kit, part number PS459829. The drum bearing kit helps the drum rotate smoothly and quietly. We would recommend checking the bearing kit to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the FEQ332CES0

[Viewing 7 of 7]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Loud Squeaking
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum belt at the motor. Access panel at rear of dryer.
7.Unscrew 3 screws from inside, center rear of drum.
8. Remove drum through the front of the dryer. You may have to spread the sides apart a little bit for it to fit
9. Lift up on the rear drum bearing to remove it from the bearing retainer. ( U shaped plastic socket)
10. unsrew 2 screws and remove the bearing retainer, ground ball. Ball retainer is on outside of dryer.
11. Vacuum everything--duct, blower, lint trap, ect.
12. Intall new bearing retainer and grounding ball, an assistant is helpful at this time, one to hold ball retainer on rear of dryer, one to screw it in from the inside
13. reassemble remainder of parts in reverse order.
Parts Used:
Rear Drum Bearing Kit
  • Frank from Boyertown, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
334 of 351 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
short circuit with a brasier metal support
Disconect the dryer from the main power source.

1) Remove the two screws from the rear / upper panel (below the control panel).

2) Snap the front side using a flat head screw driver.

3) On the inside front, remove two screws (one on each side) from the upper side and snap the door assembly off.

4) Remove the rear motor access panel (two screws) and appying tension to the spring remove the belt.

5) Pull the drum upwards (verticaly) unnapping it from the rear wall and remove it horizontally through the front panel.

6) Disconect the four leads to the heating element and remove the four screws from the rear of the dryer and replace the heating element.

Follow the same steps backwards to put the dryer together again.
Parts Used:
Heating Element Assembly
  • Juan Carlos from Weston, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
233 of 271 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thermal Limiter opened
Unplugged Dryer.
Opened top of Dryer, over the drum.
Removed Thermal Limiter.
Tested the Thermal Limiter - found it was open.
Checked all vents and exhaust tube for lint build-up.
Replaced Thermal Limiter.
Closed top of dryer.
Plugged Dryer back.
Tested Dryer - it works.
Parts Used:
Thermal Limiter - Limit 220
  • Stephen from Newnan, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
243 of 319 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!