Models > JVM1790BK01

JVM1790BK01 General Electric Microwave - Overview

Sections of the JVM1790BK01

[Viewing 8 of 8]

Manuals & Care Guides for JVM1790BK01

Click to download
Keep searches simple, eg. "belt" or "pump".
Halogen Light Bulb - 120V 20W – Part Number: WB25X10019
Halogen Light Bulb - 120V 20W
★★★★★
★★★★★
(5)
PartSelect #: PS2351821
Manufacturer #: WB25X10019
This halogen light bulb is a replacement part for the bulb behind the top grill in your microwave. It is sold individually.
$28.24
  Special Order
FUSE – Part Number: WB27X10928
FUSE
★★★★★
★★★★★
(1)
PartSelect #: PS1481237
Manufacturer #: WB27X10928
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
$16.70
  Special Order
Grease Filter – Part Number: WB06X10654
Grease Filter
PartSelect #: PS1018833
Manufacturer #: WB06X10654
The grease filter can be found on the bottom of the microwave. If your grease filter is damaged, it will not effectively capture grease that builds up when your microwave is in use. To replace the gre...
  No Longer Available
Glass Turntable Tray – Part Number: WB49X10176
Glass Turntable Tray
★★★★★
★★★★★
(4)
PartSelect #: PS1016243
Manufacturer #: WB49X10176
This tray rotates in your microwave ensuring more even temperatures.
$103.37
  Special Order
RACK HOLDER – Part Number: WB02X10750
RACK HOLDER
★★★★★
★★★★★
(1)
PartSelect #: PS224021
Manufacturer #: WB02X10750
Sold Individually.
$16.79
  Special Order
SWITCH MONITOR INTERLOCK – Part Number: WB24X25397
SWITCH MONITOR INTERLOCK
PartSelect #: PS11766871
Manufacturer #: WB24X25397
This is the replacement monitor switch for your microwave. It is black in color and measures approximately 1 inch by ¾ of an inch. This switch monitors the door latch position of your microwave and co...
  No Longer Available
Rotating Ring – Part Number: WB06X10705
Rotating Ring
PartSelect #: PS1480805
Manufacturer #: WB06X10705
The rotating ring in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If...
  No Longer Available
SWITCH - WB24X10047 – Part Number: WG02F01561
SWITCH - WB24X10047
PartSelect #: PS9861939
Manufacturer #: WG02F01561
$25.45
  In Stock
COVER ASM STIRRER FAN – Part Number: WB02X32719
COVER ASM STIRRER FAN
PartSelect #: PS12709819
Manufacturer #: WB02X32719
  No Longer Available
Wave Guide Cover – Part Number: WB06X10655
Wave Guide Cover
PartSelect #: PS1020649
Manufacturer #: WB06X10655
This part is used to protect the parts that are located behind the canopy mica.
  No Longer Available
Door Latch – Part Number: WB02X11096
Door Latch
PartSelect #: PS952070
Manufacturer #: WB02X11096
Used to keep the microwave door closed during operation.
  No Longer Available
THERMOSTAT – Part Number: WB21X10148
THERMOSTAT
PartSelect #: PS2321365
Manufacturer #: WB21X10148
This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.
$37.20
  Special Order

Questions And Answers for JVM1790BK01

Ask our experts a question about this model and we'll get back to you as soon as possible!

7 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Keith
December 1, 2019
The clock numbers are half there?
For model number JVM1790BK01
PartSelect logo
Hi Keith, Thank you for your question. If the clock numbers are only partially displayed, you will need to replace the control power board. The part number listed under your model number for the control power board is PS1018328. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
April
November 16, 2022
it appears that the seal between the two glass panes on the door of microwave have a leak. i keep food covered when cooking but liquids and fluids have gotten between the glass on the door and i cannot wipe it off because it is between the glass and otherwise the microwave looks like new. WHAT TO DO ABOUT THIS?
For model number JVM1790BK01
PartSelect logo
Hi April, thank you for your question! The door is designed to stop microwave energy from escaping, however, it does not need to be airtight in order to do this. There are small holes around the door seals because the temperatures on either side of the door differ (i.e., the air in the interior cavity is hotter than that on the outside of the microwave). This causes air expansion in the door cavity, so there are air-release holes in the seal of the door to accommodate this so the pressure does not build. We hope this information helps!

Was this helpful?
Thank you for voting!
Bobby
March 8, 2023
We have this JVM 1790 BK01 overhead. Everything works except the microwave. We can use the convection oven...lights...exhaust... turntable...everything ... But if we hit the button to start the actual microwave function it makes a loud buzz / hum and blows the ceramic fuse. Would the cause of this possibly be the Diode string?
For model number JVM1790BK01
PartSelect logo
Hi Bobby, thank you for reaching out. We believe your microwave is having this problem because the shorted capacitor is causing the fuse to blow. Blowing this up only when the door is closed indicates a short circuit somewhere in the high-power usage circuitry. Try using your ohmmeter to see if the resistance from the line voltage wire to the ground is low when the power is disconnected. This is just general advice, not specific to your unit. You may also need to check the fuse, part number PS1481237, and the magnetron, part number PS12725839. Set your ohmmeter to the lowest resistance scale. Take a resistance measurement between each of the magnetron's terminals by touching each probe to one terminal. Reverse the probes and take a second resistance measurement. Each measurement should read less than one ohm. We hope this information is useful!

Was this helpful?
Thank you for voting!
Related Parts:
Cheryl
April 1, 2023
The only button that worked was the 30 second button but when you pushed that you could add or subtract time. Now the microwave won’t work at all the timer counts down but microwave doesn’t work
For model number JVM1790BK01
PartSelect logo
Hello Cheryl, thank you for contacting us. Based on the description that you have provided, we would recommend checking the main control board, part number PS1018328. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Michele
April 6, 2023
The convection stopped working is this repairable? Microwave is from 2008
For model number JVM1790BK01
PartSelect logo
Hello Michele, thank you for contacting us. It appears you have a faulty element. The convection element is not repairable. You may have to replace the convection element, part number PS1016372, to resolve the problem. We hope this helps.

Was this helpful?
Thank you for voting!
  • 1
  • 2

Common Symptoms of the JVM1790BK01

[Viewing 6 of 6]
No heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Door not closing properly
Fixed by
these parts
Fixing Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Parts Used:
FUSE
  • Kim from Cliffside Park, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
953 of 1228 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Under the vent light bulbs needed to be replaced
Turned of f the circuit breaker to the microwave. Unscrewed the cover (1 screw!) popped out the old bulbs and plugged in the new ones, using the bubblewrap as a handle to be sure my skin didn't touch the light bulbs so the oil from my hands didn't damage or shorten the life of the new bulbs. Turned the circuit back on. That's it!
Parts Used:
Halogen Light Bulb - 120V 20W
  • Robert from Naples, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
61 of 82 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loss of Rack holder clip for GE Profile Convection Microwave oven
It was super easy! Opened the door, matched up the hole on the side of the microwave convection oven with the first portion of the rack holder clip, pushed in the rack holder clip and made a twist to ensure the rack holder clip seated in the wall of the oven. Less than 30 seconds to install - no tools necessary. I that the clips came in an order of a unit of 8 clips, allowing me a quick-fix if I need additional clips for loss. Now I have stable racks within my oven ensuring safe insertion and removal of food from the oven. Having the full use of both of the racks in my convection oven during the summer is a Godsend, especially living in the Ohio Valley with its' hot steamy summers - my kitchen stays cool as a cucumber, and so do I!
Parts Used:
RACK HOLDER
  • Nancy E from Cincinnati, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
34 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!