Models > JVM2070SH001

JVM2070SH001 General Electric Microwave - Overview

Sections of the JVM2070SH001

[Viewing 1 of 1]

Manuals & Care Guides for JVM2070SH001

Click to download
Keep searches simple, eg. "belt" or "pump".
Halogen Light Bulb - 120V 20W – Part Number: WB25X10019
Halogen Light Bulb - 120V 20W
★★★★★
★★★★★
(5)
PartSelect #: PS2351821
Manufacturer #: WB25X10019
This halogen light bulb is a replacement part for the bulb behind the top grill in your microwave. It is sold individually.
$28.24
  Special Order
Grease Filter – Part Number: WB06X10288
Grease Filter
★★★★★
★★★★★
(1)
PartSelect #: PS227998
Manufacturer #: WB06X10288
This metallic vent hood filter collects grease particles in the air from cooking. This part is sold individually.
  No Longer Available
FUSE – Part Number: WB27X10928
FUSE
★★★★★
★★★★★
(1)
PartSelect #: PS1481237
Manufacturer #: WB27X10928
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
$16.70
  Special Order
Charcoal Filter – Part Number: WB02X10956
Charcoal Filter
PartSelect #: PS951943
Manufacturer #: WB02X10956
This filter cannot be cleaned. It must be replaced.
  No Longer Available
Secondary Door Switch – Part Number: WB24X829
Secondary Door Switch
★★★★★
★★★★★
(1)
PartSelect #: PS237421
Manufacturer #: WB24X829
  No Longer Available
Glass Light Lens – Part Number: WB36X10071
Glass Light Lens
PartSelect #: PS247275
Manufacturer #: WB36X10071
$23.26
  Special Order
Monitor Door Switch – Part Number: WB24X830
Monitor Door Switch
★★★★★
★★★★★
(1)
PartSelect #: PS237422
Manufacturer #: WB24X830
$47.21
  Special Order
Screw – Part Number: WE02X10086
Screw
PartSelect #: PS3511445
Manufacturer #: WE02X10086
Sold individually.
$8.25
  Special Order
Hood Damper Assembly – Part Number: WB06X10436
Hood Damper Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS651224
Manufacturer #: WB06X10436
  No Longer Available
Glass Cooking Tray – Part Number: WB49X10063
Glass Cooking Tray
PartSelect #: PS250009
Manufacturer #: WB49X10063
This tray rotates in your microwave ensuring more even temperatures and is approx.14-1/2 inches in diameter.
$117.41
  Special Order
Thermostat Cut-Out – Part Number: WB27X10195
Thermostat Cut-Out
PartSelect #: PS239319
Manufacturer #: WB27X10195
Also known as Thermostat or Humidity Sensor for Fault Code.
$47.59
  Special Order
Thermal Fuse – Part Number: WB27X1127
Thermal Fuse
PartSelect #: PS239811
Manufacturer #: WB27X1127
  No Longer Available

Questions And Answers for JVM2070SH001

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eric
December 19, 2019
Hello. My microwave shuts off after running a few seconds. Any idea on why this happens?
For model number JVM2070SH001
PartSelect logo
Hi Eric, Thank you for your question. If the microwave runs for a few seconds and then shuts off, the door switches may be defective or loose. Sometimes the door switches will arch or overheat and this will prevent the microwave from working correctly and it will shut off. The microwave may also shut off because of either a defective touchpad or control panel, a malfunctioning voltage transformer, a faulty cooling fan or a clogged vent. You will need to check each part and verify which one is causing the issue. We hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the JVM2070SH001

[Viewing 6 of 6]
Won’t turn on
Fixed by
these parts
Fixing Fixing Fixing
Show All
No heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing Fixing Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Parts Used:
FUSE
  • Kim from Cliffside Park, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
953 of 1228 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dirty filter - replacement filter installed
Manually with no tools
Parts Used:
Grease Filter
  • Laura from Sugar Grove, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
537 of 612 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the only difficult part. First use a torx bit to remove the two torx screws below the latches inside the microwave. This frees the latching part inside, that holds the door switches, which you will remove after you take off the control panel. The top grill has to come off before you can remove the door panel. Remove the screws above the grill, on the microwave top cover, The grill on this model is covered with a panel that moves out when it vents. After removing the two top screws, the covered grill vent slides left to remove. Be careful, as the sliding tabs are plastic. Wiggle and jiggle it, to slip it off. Below the removed grill, is a small metal grill with one screw in lower center. Remove that screw, and wiggle that out. You'll then see the one screw that holds on the control panel. Remove this screw, and lift the control panel up to remove. Again, go slowly and gently, as the bottom tabs holding the control panel in, are also plastic and easily broken. Lay the control panel on something, (I used the coffee maker) and pull out the wire bundles tucked on the left, that are attached to the latching panel. Wiggle the latching panel gently to lift it up off of it's plastic tabs and pull it out towards you, so you can see the three door switches. Each switch (part number WB24X829) has a little black switch on it. Feel each switch with either your finger, or a screwdriver to see which one doesn't "click" strongly. The weak one is the one you will replace. The door switches are fitted into a tab, and plugged into their wires. Remove the defective switch, pull out the wires, and replace it with the new switch, plugging back the wires, and slipping it back into it's plastic tabs. Then put everything back together in reverse order. The entire job took me fifteen minutes EXCEPT for figuring out how to slide off the upper grill, which I have told you. A repairman would have cost $150, the part was $18. AND, there's a good chance, the other two switches will get "used up" in the next year or so as well, so I'll be ready next time. Thank you, Partselect, why work all day, to make money, only to give it to somebody else, for fifteen minutes of work. All I needed was the knowledge.
Parts Used:
Secondary Door Switch
  • Marla from Arlington, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
310 of 370 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!