Models > KBFS20ETSS01

KBFS20ETSS01 KitchenAid Refrigerator - Overview

Sections of the KBFS20ETSS01

[Viewing 8 of 8]

Manuals & Care Guides for KBFS20ETSS01

Click to download
Keep searches simple, eg. "belt" or "pump".
Refrigerator Water Filter – Part Number: EDR4RXD1
Refrigerator Water Filter
PartSelect #: PS11722130
Manufacturer #: EDR4RXD1
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
  No Longer Available
Pantry End Cap - Right Side – Part Number: WP12656018
Pantry End Cap - Right Side
★★★★★
★★★★★
(27)
PartSelect #: PS11738568
Manufacturer #: WP12656018
This part mounts on the wall and is used to support the pantry drawer.
$55.34
  In Stock
Pantry End Cap - Left Side – Part Number: WP12656105
Pantry End Cap - Left Side
★★★★★
★★★★★
(17)
PartSelect #: PS11738573
Manufacturer #: WP12656105
Sold individually.
$83.99
  In Stock
Replacement Ice Maker – Part Number: D7824706Q
Replacement Ice Maker
★★★★★
★★★★★
(27)
PartSelect #: PS2121513
Manufacturer #: D7824706Q
NOTE: This replacement ice maker mechanism does NOT come with a cover, shut off arm, a wire harness, or the mounting hardware. Those must be ordered separately, or you can use the existing parts.
$176.88
  In Stock
Pantry Drawer Lid – Part Number: WP67005930
Pantry Drawer Lid
★★★★★
★★★★★
(13)
PartSelect #: PS11743650
Manufacturer #: WP67005930
This part helps keep everything inside the drawer, it acts as a cover and also keeps you drawer at the proper temperature by creating a seal.
$83.80
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
  In Stock
Refrigerator Door Switch – Part Number: W11384469
Refrigerator Door Switch
★★★★★
★★★★★
(28)
PartSelect #: PS12728638
Manufacturer #: W11384469
Door switch turns the light off when you close the door.
$48.82
  In Stock
Refrigerator Water Filter Bypass – Part Number: W11395888
Refrigerator Water Filter Bypass
★★★★★
★★★★★
(8)
PartSelect #: PS12731165
Manufacturer #: W11395888
This cap is used when bypassing the filter.
$44.72
  In Stock
Dual Water Inlet Valve – Part Number: WP67006531
Dual Water Inlet Valve
★★★★★
★★★★★
(14)
PartSelect #: PS11743697
Manufacturer #: WP67006531
The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold and to the water line.
$183.82
  In Stock
Compressor Start Device and Capacitor – Part Number: W10613606
Compressor Start Device and Capacitor
★★★★★
★★★★★
(14)
PartSelect #: PS8746522
Manufacturer #: W10613606
This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start ...
$96.53
  In Stock
Humidity Control Slide – Part Number: WP67005864
Humidity Control Slide
★★★★★
★★★★★
(7)
PartSelect #: PS11743638
Manufacturer #: WP67005864
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
$14.11
  In Stock
Thermistor – Part Number: 12002355
Thermistor
★★★★★
★★★★★
(8)
PartSelect #: PS2003772
Manufacturer #: 12002355
Long harness thermistor kit.
$57.83
  In Stock

Questions And Answers for KBFS20ETSS01

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
June 14, 2021
What is the model number for the water filter inside the refrigerator. I need to replace it.
For model number KBFS20ETSS01
PartSelect logo
Hello Scott, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11722130. We hope this helps.

Was this helpful?
Thank you for voting!
Kevin
February 27, 2023
freezer door handle fell off
For model number KBFS20ETSS01
PartSelect logo
Hello Kevin, thank you for contacting us. The Handle has a screw and a mount. You will need to investigate which of these parts you will need. The Handle is PS11740406. The Screw is PS11741409. The Handle Mount is PS11743658. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Related Parts:
David
March 20, 2023
Freezer will not freezer
For model number KBFS20ETSS01
PartSelect logo
Hello David, Thank you for writing. We suggest testing the Thermistor. There are two thermistors in this fridge, one in the freezer and the other in the fresh food compartment. The one in the freezer is at the back corner with a cover over it, you would use a screwdriver and insert it into the tab at one side to remove the cover and access the thermistor inside the cover. You can test the Thermistor to see if it is defective. The resistance of the thermistor in the unit should be 2.7K ohms at 77 degrees. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
JIM
February 22, 2024
The water filter cover is broken and will not hold up the filter unless it is taped. How do I get a replacement cover?
For model number KBFS20ETSS01
PartSelect logo
Hello Jim, thank you for getting in touch. The water filter cover you are looking for is part number PS11738541. If you need help placing an order for it, please feel free to give us a call!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the KBFS20ETSS01

[Viewing 22 of 22]
Ice maker not making ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Light not working
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t open or close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not dispensing water
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge too cold
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer section too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer not defrosting
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker dispenses too little ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker dispenses too much ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Frost buildup
Fixed by
these parts
Fixing Fixing Fixing
Show All
Clicking sound
Fixed by
these parts
Fixing Fixing
Show All
Door Sweating
Fixed by
these parts
Fixing Fixing
Show All
Freezer too cold
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Too warm
Fixed by
these parts
Fixing
Show All
Won’t start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Parts Used:
Refrigerator Water Filter
  • Douglas from Byron, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
901 of 1017 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker producing few or no cubes and often leaving "kling-ons" on ice tray
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment screw & bracket at lower front of icemaker.
Disconnect wiring harness from socket @ rear of compartment.
Tricky part was determining what type of connection held the other two attachment points along the long edge of the icemaker. I did not have repair manual or useful drawing but looked @ PartsDirect pic of side brackets & used a small mirror to confirm that mine were also some sort of "snap in" attachment.
Remove icemaker unit by pushing upward and outward on the unit. I takes a good bit of pressure and will pop loose, but be careful not to break attachment bracket from freezer wall.
Scavenge shut off bar and wiring harness from old icemaker once you have it out & attach to new one before installing it back in freezer.
Again, you might find a mirror useful to align those pesky snap-in brackets with the new unit.
Since you probably kept your freezer running while waiting for the part, the plastic snap-ins will be cold and brittle. I warmed them up first by applying a dampened cloth heated in the microwave to make them a little more pliable.
A good push of the new unit towards the snap-ins along with some upward force will get it stable.
Reattach the metal screw in bracket & connect the wiring harness to rear plug... and don't forget to plug the whole thing back in.
It will take awhile for the first batch of cubes dump as the timer may need to cycle completely around to get to the fill cycle... be patient.
Dump the first couple of batches of cubes just to make sure you're free of any residue.
Parts Used:
Replacement Ice Maker
  • Bernie from Diamond Bar, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
805 of 893 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker leaking at first then quit making ice all together
unplugged refrigerator and shut off water, removed one screw and loosened two more, after removing one side of the ice bucket rail, unplugged electrical from old ice maker. Then I removed the bail and out on new one, reinstalled ice maker in reverse order from taking it out.
Parts Used:
Refrigerator Water Filter Replacement Ice Maker
  • Hootie from Joshua, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
427 of 485 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!