Models > KSC24C8EYY02

KSC24C8EYY02 KitchenAid Refrigerator - Overview

Sections of the KSC24C8EYY02

[Viewing 12 of 12]

Manuals & Care Guides for KSC24C8EYY02

Click to download
Keep searches simple, eg. "belt" or "pump".
Refrigerator Air Filter – Part Number: W10311524
Refrigerator Air Filter
★★★★★
★★★★★
(71)
PartSelect #: PS2580853
Manufacturer #: W10311524
This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
$27.49
  In Stock
Produce Preserver Filter – Part Number: W10346771A
Produce Preserver Filter
★★★★★
★★★★★
(25)
PartSelect #: PS3503014
Manufacturer #: W10346771A
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
$27.49
  In Stock
Refrigerator Ice and Water Filter – Part Number: EDR1RXD1
Refrigerator Ice and Water Filter
★★★★★
★★★★★
(13)
PartSelect #: PS11701542
Manufacturer #: EDR1RXD1
This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
$93.78
  Special Order
Capacitor – Part Number: WPW10662129
Capacitor
★★★★★
★★★★★
(23)
PartSelect #: PS11757023
Manufacturer #: WPW10662129
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
$100.94
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
  In Stock
Bi-Metal Defrost Thermostat – Part Number: WPW10225581
Bi-Metal Defrost Thermostat
★★★★★
★★★★★
(13)
PartSelect #: PS11750673
Manufacturer #: WPW10225581
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
$59.41
  In Stock
Refrigerator Door Switch – Part Number: W11384469
Refrigerator Door Switch
★★★★★
★★★★★
(27)
PartSelect #: PS12728638
Manufacturer #: W11384469
Door switch turns the light off when you close the door.
$49.07
  In Stock
Refrigerator Compressor Start Relay – Part Number: WPW10197428
Refrigerator Compressor Start Relay
★★★★★
★★★★★
(10)
PartSelect #: PS11750123
Manufacturer #: WPW10197428
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the pow...
$97.36
  In Stock
Door Switch – Part Number: W11396033
Door Switch
★★★★★
★★★★★
(9)
PartSelect #: PS12731166
Manufacturer #: W11396033
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$35.26
  In Stock
Screw – Part Number: WP489483
Screw
PartSelect #: PS11742755
Manufacturer #: WP489483
This screw is sold individually.
$16.69
  In Stock
Evaporator Fan Blade – Part Number: WP2169142
Evaporator Fan Blade
★★★★★
★★★★★
(2)
PartSelect #: PS11738973
Manufacturer #: WP2169142
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
$47.43
  In Stock
Touch-up Paint - Black – Part Number: 72032
Touch-up Paint - Black
★★★★★
★★★★★
(1)
PartSelect #: PS385141
Manufacturer #: 72032
16ml
$14.96
  In Stock

Questions And Answers for KSC24C8EYY02

Ask our experts a question about this model and we'll get back to you as soon as possible!

5 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
December 12, 2019
I'm looking for the front panel for the top drawer of the three (smallest drawer of the three).Front panel about 6" high and drawer itself is about 5" high. thank you
For model number KSC24C8EYY02
PartSelect logo
Hello John, thank you for writing. Sadly, it is not sold separate from the drawer itself, Snack Pan part number PS11756119. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Doan
February 14, 2020
Ice on ice maker but not ejecting cubes
For model number KSC24C8EYY02
PartSelect logo
Hi Doan, Thank you for your question. If you find ice inside the ice mold, it means your ice maker is receiving water and the problem likely isn't with the water supply. Instead, it's most likely a mechanical or electrical problem. When moving things around in the freezer, it's not uncommon to accidentally nudge the control arm into the off position, which halts production of ice. This is an easy fix. Locate the metal control arm and move it to the down or on position. If the control arm is in the on (down) position and the mold is filled with ice, the problem likely lies with the motor, gearbox or electrical connection. Start by making sure all electrical connections are properly seated. Slide the refrigerator out from the wall, turn off the water supply valve and disconnect it from power. Locate the quick release plug on the back wall inside the freezer. Unplug the connection it and reconnect it to ensure it's fully connected. Manually remove any remaining ice from the mold by adding some water and letting it sit for a minute. The ice will begin to melt and should be easier to remove. Restore power to the refrigerator and lift the control arm to the off position. Lower the control arm back down and wait for approximately 10 seconds for the solenoid to engage and fill the mold with water. Wait three to four hours for the ice to freeze and see if the ice now ejects. If not, it's likely that you will need to replace the motor or gearbox. We hope this helps. Thank you and have a great day.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Paul
June 10, 2022
When I hold the lock button for 3 seconds to start the refrigerator, it brinks 3 times and never start. How do I start it!
For model number KSC24C8EYY02
PartSelect logo
Hello Paul, Thank you for the question. For use and care information we suggest consulting the Owners Manual as we just carry parts here. We have provided a link to the manual. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Additional Links:
Gigi
December 28, 2023
i have a frigidaire refrigerator (ksc24c8eyy02 ) Not cooling or freezing at all and i have watched videos showing it could be the relay. i would like to know what else might i need to check, to fix this issue.
For model number KSC24C8EYY02
PartSelect logo
Hi Gigi, thank you for contacting us. Based on our research, the issue is most probably with the compressor start relay, part number PS11750123. It attaches to the compressor and helps start the compressor motor. You may need to replace it to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Lenn
23 days ago
looking for the crisper drawer (top)
For model number KSC24C8EYY02
PartSelect logo
Hello Lenn, thank you for your inquiry. The crisper drawer you are looking for is part number PS11756019. Customer service is available 7 days a week if you need help placing an order!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the KSC24C8EYY02

[Viewing 21 of 21]
Light not working
Fixed by
these parts
Fixing Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer section too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer not defrosting
Fixed by
these parts
Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Clicking sound
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t open or close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge too cold
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not dispensing water
Fixed by
these parts
Fixing Fixing Fixing
Show All
Frost buildup
Fixed by
these parts
Fixing
Show All
Freezer too cold
Fixed by
these parts
Fixing
Show All
Fridge runs too long
Fixed by
these parts
Fixing Fixing
Show All
Ice maker dispenses too little ice
Fixed by
these parts
Fixing
Show All
Door Sweating
Fixed by
these parts
Fixing
Show All
Won’t start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My refrigerator stopped cooling and the freezer section stopped freezing
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
Parts Used:
Capacitor
  • garth from forest lake, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
394 of 474 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge was getting too warm, ice buildup on coils.
WARNING: REPLACING THIS PART REQUIRES CUTTING AND SPLICING ELECTRICAL WIRES. RISK OF ELECTRICAL SHOCK OR FIRE. DO NOT ATTEMPT THIS REPAIR IF YOU ARE NOT EXPERIENCED WITH ELECTRICAL WIRING.

Part Info:
The bi-metal strip is clipped onto the evaporator coils and is designed to regulate the defrost coil temperature. If it is not functioning properly you may notice ice buildup preventing air flow (and preventing proper refrigeration), or more rarely the freezer side may get too warm during the defrost cycle.

Materials:
* Replacement bi-metal strip
* Wire cutters
* Wire strippers
* Wire nuts
* Electrical tape
* 10MM socket

Steps:

1: UNPLUG THE FRIDGE! If there is ice buildup, wait until the ice has melted. A box fan blowing at the ice will help melt it more quickly.

2: Remove the panel covering the evaporator coils. It's located inside the fridge, on the freezer side.

3: Un-clip the bi-metal strip from the evaporator coils.

4: Unplug the wires from the evaporator fan, defrost coil and bi-metal strip, then disconnect the main connector that is plugged into the rear wall.

5: Clip both wires to the old ( bad ) bi-metal strip. Cut close to the casing of the bi-metal strip so there are long wires to splice onto.

6: Strip 1/4 to 1/2 inches of insulation off of the ends of the wires ( depending on the size of the wire-nuts you use). Twist the bare wires slightly to prevent fraying.

7: Do the same for the ends of the wires on the (new) bi-metal strip.

8: Take the ends of the wires belonging to the (new) bi-metal strip and the wires coming from the main plug. Take the like-colored wires, and twist the bare metal ends together.

9: Twist on wire nuts, for both sets of wires. Make sure they are snug, with no bare wire showing.

10: Tape over the wire nuts with electrical tape. Tape over the wires nuts in a spiral fashion, completely covering the nut and both wires that are now spliced together. This will prevent accidental shorting.

11: Plug the main plug back into the rear wall of the fridge. Also re-connect the connectors to the evaporator fan and defrost coil. Make sure the clips on the connectors are snug to ensure a good connection.

12: Clip the new bi-metal strip onto the coils, in the same spot as before. ( Usually just after the small incoming copper tubing that connects to the coils, known as the expansion valve. That is usually the coldest spot on the coils during operation).

13: Replace the panel that covers the coils.

14: Plug the fridge back in... Now you fridge should defrost correctly. If it does not, your defrost coil could be burned out, or the control board could be faulty.
Parts Used:
Bi-Metal Defrost Thermostat
  • Cathy from Winter Park, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
154 of 178 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Parts Used:
Refrigerator Door Switch
  • Clint from Rayville, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
118 of 192 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!