Models
>
LMV1683ST
LMV1683ST (CSBELGA) LG Microwave - Overview
Sections of the LMV1683ST
[Viewing 7 of 7]Keep searches simple, eg. "belt" or "pump".
FILTER,GREASE
PartSelect #: PS12713651
Manufacturer #: 5230W1A012E
Sold individually.
$18.02
In Stock
Locker
PartSelect #: PS3522838
Manufacturer #: 4026W2A019A
The locker, or door latch assembly fits to the inside of the microwave door, and keeps the door closed. If the door on your microwave oven doesn’t appear to close properly, you may have a problem with...
$10.39
On Order
Damper
PartSelect #: PS3524148
Manufacturer #: 4900W1A001B
This metal vent damper door closes off the exhaust duct when the fan is not running to stop outside air from entering the microwave unit, and opens when the fan turns on to allow air to vent away from...
$17.90
In Stock
Air Duct Bracket
PartSelect #: PS3523851
Manufacturer #: 4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be...
$27.00
In Stock
FILTER,CHARCOAL
PartSelect #: PS12713650
Manufacturer #: 5230W1A011E
This is the replacement charcoal filter for your microwave. It is approximately 8 inches by 5 inches. The charcoal filter removes cooking odors from the air that circulate through the microwave vent. ...
$22.80
In Stock
Mounting Plate
PartSelect #: PS7784808
Manufacturer #: 3300W0A045A
This mounting plate is a manufacturer-approved replacement part for your microwave. The mounting plate, or bracket, secures your above-range microwave in place against the wall. To conduct this repair...
$38.85
In Stock
Fuse Time Delay
PartSelect #: PS3522741
Manufacturer #: 3B74133K
This Fuse protects the microwave from damage by shutting off the microwave if there's a power surge.
High-voltage capacitors can retain a lethal electrical charge even when the microwave is unplugged,...
$10.00
In Stock
Questions And Answers for LMV1683ST
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allan
May 5, 2022
Afternputting time in then push start it shuts down after 8/9 seconds
For model number LMV1683ST
Hi Allan,
Thank you for your question. If the microwave shuts off after a few minutes, you may have a defective or loose door switch. If the door switch is positioned correctly, you will need to test the door switch for continuity with a multimeter. Using a multimeter set to Rx1, ensure the button is depressed and touch the terminals with the meter’s probes, you should receive a reading of zero or nearly zero, indicating that there is continuity. Next, with the probes still touching the terminals, ensure the button is not pushed in, this test should indicate that there isn’t continuity. If your test results differ from those above, you will need a replacement door switch. The part number listed under your model number for the door switches are PS3522738 and PS3529293. If you need help placing an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the LMV1683ST
[Viewing 5 of 5]No heat
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Door not closing properly
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave would not rotate or heat up food.
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Parts Used:
-
Joshua from WHITE LAKE, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
44 of 60 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed grease filters for a used over range microwave
-
tony from kewanna, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
26 of 53 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fan cover in top of the cooking area was burned.
The original cover was burned and actually caught on fire. Research informed me that food can splatter and stick to the cover. The particle will get hot enough to ignite the plastic cover. I ordered the cover and included the fan since it was so cheap, Replacement was super easy. Done in 10 minutes and made my wife happy. She was ready to buy a new microwave because she thought something was wrong with ours but food splatter was the cause. Parts were less than $10 + $6 shipping. Keep the inside of the microwave clean!!
Parts Used:
-
Mike from PINEY FLATS, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
13 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!