Models > LNC7764A71

LNC7764A71 Admiral Dryer - Overview

Sections of the LNC7764A71

[Viewing 8 of 8]

Manuals & Care Guides for LNC7764A71

Click to download
Keep searches simple, eg. "belt" or "pump".
Multi Rib Belt - 92-1/4" – Part Number: 341241
Multi Rib Belt - 92-1/4"
★★★★★
★★★★★
(132)
PartSelect #: PS346995
Manufacturer #: 341241
This dryer drum belt has four ridges, three grooves and is 1/4" wide.
$21.85
  In Stock
High Limit Kit – Part Number: LA-1053
High Limit Kit
★★★★★
★★★★★
(22)
PartSelect #: PS2162282
Manufacturer #: LA-1053
This kit comes with three separate thermal fuses and is usually used with clothes dryers that have a fan mounted on the motor shaft. Included within this kit is the high limit (Limit: 258) the gas hig...
$41.96
  In Stock
Lint Filter – Part Number: WP53-0918
Lint Filter
★★★★★
★★★★★
(7)
PartSelect #: PS11742807
Manufacturer #: WP53-0918
This lint filter screen has two side guides on either either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide
$74.40
  In Stock
Door Catch Kit – Part Number: LA-1003
Door Catch Kit
★★★★★
★★★★★
(9)
PartSelect #: PS2162263
Manufacturer #: LA-1003
This kit comes in two pieces: the catch and the clip.
$41.11
  In Stock
Heating Element Kit - 240V 4750W – Part Number: LA-1044
Heating Element Kit - 240V 4750W
★★★★★
★★★★★
(9)
PartSelect #: PS2162280
Manufacturer #: LA-1044
$100.27
  In Stock
Blower Wheel – Part Number: W11497304
Blower Wheel
★★★★★
★★★★★
(9)
PartSelect #: PS16221211
Manufacturer #: W11497304
This wheel has a deep D-shaped shaft receptacle. The spring clamp is not included with this part.
$75.19
  In Stock
Rear Drum Support Roller Kit – Part Number: LA-1008
Rear Drum Support Roller Kit
★★★★★
★★★★★
(7)
PartSelect #: PS2162268
Manufacturer #: LA-1008
Included in this rear drum support roller kit are 4 screws, 1 spacers, 2 washers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts. *** Note: Per manufacturer this kit has been upd...
  No Longer Available
Blower Wheel Clamp – Part Number: WP312967
Blower Wheel Clamp
PartSelect #: PS11740752
Manufacturer #: WP312967
This blower wheel clamp is less than an inch long and is used for some clothes dryers to hold the blower wheel firmly in place. This green clamp is made of metal.
$17.30
  In Stock
Motor Pulley – Part Number: WP31001535
Motor Pulley
★★★★★
★★★★★
(2)
PartSelect #: PS11740721
Manufacturer #: WP31001535
This is the replacement motor pulley for your dryer. The motor pulley transfers momentum from the drive motor to the drum via the drive belt. If the motor pulley cracks or is no longer staying on the ...
$84.54
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$6.88
  In Stock
Door Seal – Part Number: WP31001529
Door Seal
★★★★★
★★★★★
(1)
PartSelect #: PS11740719
Manufacturer #: WP31001529
If this part appears to be too wide for your particular appliance, per the manufacturer, all you have to do is pull it apart.
$110.09
  On Order
Screw – Part Number: WP3196164
Screw
PartSelect #: PS11740978
Manufacturer #: WP3196164
This screw is sold individually.
$9.76
  In Stock

Questions And Answers for LNC7764A71

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
April 15, 2022
I'm replacing the dryer idlers assembly part number wp532366 don't know where to hook the tension spring that is attached to the shaft. It was unhooked when I went to replace the part. Can't figure out where it hooks to the frame?
For model number LNC7764A71
PartSelect logo
Hello Brian, thank you for writing. The spring hooks on the idler and into item # 8 or part PS2048107 which is the housing. We have a video for a similar appliance, that may be of some help. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Solomon
November 28, 2019
Can I order replacement filter screen? And how much?
For model number LNC7764A71
PartSelect logo
Hello Solomon, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11742807. Please enter the part number for current price and availability. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the LNC7764A71

[Viewing 11 of 11]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Heat stays on after drum has stopped
Fixed by
these parts
Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing
Show All
Not Heating
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
lint filter broke
I pulled out the broken lint filter and put the new one back in, real easy. I am so happy with the prompt delivery I got from PartsSelect.com. I ordered on a Monday and and it was delivered on a Wednesday
Parts Used:
Lint Filter
  • Jane from Grand Forks, ND
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
481 of 493 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric dryer would not heat - Thermal fuses - $25 fix - I love DIY
1. Unplug dryer from power outlet
2. Lift dryer top from front (hinged in rear). Just friction holding top down. Use flat scewdriver wrapped in cloth to help lift.
3. Locate heating element - rear top behind drum
4. Unplug red wires to the high limit thermal fuse
5. Unplug red wires to the heating element
6. Unlug white wires to the high limit fuse
7. Remove high limit thermal fuse
8. Remove heating element
9. Remove high limit fuse
10 Clean heating box
Installation is reverse order but do the following first!
Clean lint trap - Remove front of dryer
1. Unplug white door switch wires. inside front top right
2. remove two screws securing the front of dryer - inside front top left and top right. Front of dryer is hinged at bottom
3. Clean all the lint you can find. If you have never cleaned out the lint, there might be a lot and the cause of over heating (shorting fuse life). Add to your yearly things to do list.
4. While your at it check the alignment of the plastic glides the drum sits on.
5. Also check the foam gasket between the fan housing and lint trap. Mine was off a bit. Realigned with doubled sided tape.
Parts Used:
High Limit Kit
  • Ronald from Fredericksburg, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
214 of 234 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dry stopped heating - still had good air flow
I was about to purchase a new dryer because of the age of my dryer and not wanting to hire someone to fix it. After a little web research, I saw several do-it -yourself stories indicating this was a very easy repair.

This was an extremely easy repair and it save me lots of $$:
(1) Disconnected power
(2) Opened the top of the dryer
(3) Disconnected wires to temperature sensor.
(4) Used a 1/2" socket wrench with extension and a drill to remove 2 screws holding down the temperature sensor
(5) Removed 1 screw holding down the heating element.
(6) Removed wires connected to heating element and pulled out old element.
(7) Reassembled new element.
(8) Turned on empty dryer for 30 minutes to burn off smell from the new element.

Worked like a charm!
Parts Used:
Heating Element Kit - 240V 4750W
  • Brianna from Littleton, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
206 of 233 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!