Models > LRE30453ST

LRE30453ST ((ASTLLGA)) LG Range - Overview

Sections of the LRE30453ST

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: EBG61305805
Temperature Sensor
★★★★★
★★★★★
(4)
PartSelect #: PS11732697
Manufacturer #: EBG61305805
$111.30
  In Stock
Thermostat – Part Number: 6930W1A003X
Thermostat
★★★★★
★★★★★
(3)
PartSelect #: PS3530468
Manufacturer #: 6930W1A003X
$31.73
  In Stock
Bake Element – Part Number: MEE36593201
Bake Element
★★★★★
★★★★★
(2)
PartSelect #: PS3535354
Manufacturer #: MEE36593201
$197.86
  In Stock
FOOT – Part Number: 4778W1N001B
FOOT
PartSelect #: PS3635599
Manufacturer #: 4778W1N001B
$22.88
  In Stock
Range Oven Relay Control Board – Part Number: 6871W1N012B
Range Oven Relay Control Board
PartSelect #: PS3530118
Manufacturer #: 6871W1N012B
$224.27
  In Stock
Window,Glass – Part Number: 4890W1N005A
Window,Glass
★★★★★
★★★★★
(1)
PartSelect #: PS3524129
Manufacturer #: 4890W1N005A
$211.63
  In Stock
Radiant Heater – Part Number: 5300W1R004A
Radiant Heater
PartSelect #: PS3527756
Manufacturer #: 5300W1R004A
$155.69
  In Stock
Screw,Tapping – Part Number: 1TTL0402622
Screw,Tapping
PartSelect #: PS3517553
Manufacturer #: 1TTL0402622
$14.34
  Special Order
Motor,AC Fan – Part Number: EAU36206002
Motor,AC Fan
PartSelect #: PS3533535
Manufacturer #: EAU36206002
$142.43
  In Stock
Common Nut – Part Number: 1NHB0500032
Common Nut
PartSelect #: PS3517437
Manufacturer #: 1NHB0500032
$10.39
  In Stock
Screw,Customized – Part Number: 1SZZW1N006A
Screw,Customized
PartSelect #: PS3517507
Manufacturer #: 1SZZW1N006A
$10.39
  Special Order
Fan,Convection – Part Number: 5900W1N001B
Fan,Convection
PartSelect #: PS3528620
Manufacturer #: 5900W1N001B
$29.81
  Special Order

Questions And Answers for LRE30453ST

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the LRE30453ST

[Viewing 6 of 6]
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace Inner Oven glass because it shattered
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.

Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know the process of where each screw goes when you re-assemble.

Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)

Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.

Hope this helps
Parts Used:
Window,Glass
  • Jeffrey from CERRITOS, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
11 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat in oven mode
Verified P/N with LG. Took a few days . They sent names of several suppliers, cost was almost double. Ordered part from P/S, here in 2 days. Watched video on you tube. Unplugged, took off back, unplugged bake element, removed power box. The opening for bake element is still attached to rear panel by tiny bits of sheet metal. Used Dremel with cut-off wheel to cut thru nibs & deburr opening. this panel has to be removed, it rests on bottom panel & is held in position by power box. Removed bake element carefully, front of element broken, tried to put new element in, would not fit. Had to grind notches in bottom panel down to clear supports on new element. This did the trick. back together quick & no problems. If had to do again estimate less than 1 hour.. By the way am 81 yrs. young.
Parts Used:
Bake Element
  • Dennis from CARY, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would initially start to heat up but would not hold its temp
I searched online and found someone that seemed to have the exact problem. That person had replaced the lower burner and the same PCB board I replaced. I was able to test the lower burner without removing it and it tested OK. The PCB board in the article I had checked was burned and obviously bad but mine was not. I took a chance and ordered just the PCB board. I replaced this board and the oven now works perfectly. I seems this board was not turning on the bottom burner but the system thought it was working fine.
Parts Used:
Range Oven Relay Control Board
  • Leonard from Plano, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!