Models > MVWX655DW1

MVWX655DW1 Maytag Washer - Overview

Sections of the MVWX655DW1

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
  In Stock
Drive Hub Kit – Part Number: W10528947
Drive Hub Kit
★★★★★
★★★★★
(10)
PartSelect #: PS6012095
Manufacturer #: W10528947
This drive hub kit (part number W10528947VP) is for washers. Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
$43.13
  In Stock
Washer Drive Pulley – Part Number: W10721967
Washer Drive Pulley
★★★★★
★★★★★
(13)
PartSelect #: PS10057144
Manufacturer #: W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.12
  In Stock
Drive Belt – Part Number: WPW10006384
Drive Belt
★★★★★
★★★★★
(5)
PartSelect #: PS11747978
Manufacturer #: WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
$27.47
  In Stock
Washing Machine Door Lock Assembly – Part Number: W11307244
Washing Machine Door Lock Assembly
★★★★★
★★★★★
(8)
PartSelect #: PS12704713
Manufacturer #: W11307244
$188.47
  In Stock
Suspension – Part Number: W11130362
Suspension
★★★★★
★★★★★
(4)
PartSelect #: PS12347546
Manufacturer #: W11130362
$153.75
  In Stock
Hose Clamp – Part Number: WP285655
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.11
  In Stock
Screw, 8-16 x 1.000 – Part Number: WP8533953
Screw, 8-16 x 1.000
PartSelect #: PS11746167
Manufacturer #: WP8533953
Sold individually.
$10.11
  In Stock
Wash Plate – Part Number: W10902814
Wash Plate
★★★★★
★★★★★
(4)
PartSelect #: PS11769534
Manufacturer #: W10902814
This wash plate is for washers Unplug the washer and shut off the water supply before installing this part
$162.88
  In Stock
Washer Drain Hose – Part Number: W11244231
Washer Drain Hose
★★★★★
★★★★★
(2)
PartSelect #: PS12578897
Manufacturer #: W11244231
The drain hose carries used water from the washer to your house drain.
$31.71
  In Stock
ACTUATOR – Part Number: W11481722
ACTUATOR
★★★★★
★★★★★
(1)
PartSelect #: PS16221077
Manufacturer #: W11481722
$91.36
  In Stock
Cold Water Valve – Part Number: W11168740
Cold Water Valve
★★★★★
★★★★★
(6)
PartSelect #: PS12348073
Manufacturer #: W11168740
This is the replacement cold water inlet valve for your washer. It is mainly blue in color and has two solenoids. The water inlet valve in your washer connects to the water source and solenoid wires, ...
$191.72
  In Stock

Questions And Answers for MVWX655DW1

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

139 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kim
February 11, 2020
What causes water not to come into the machine? The sensor light is on but nothing is happening.Thanks
For model number MVWX655DW1
PartSelect logo
Hello Kim, thank you for your question. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.I hope this helps.

20 people found this helpful.

Was this helpful?
Thank you for voting!
Paul
November 30, 2019
Clothes come out wet, does not spin all of the water out of the clothes. Maytag bravos top load washing machine.
For model number MVWX655DW1
PartSelect logo
Hello Paul and thanks for writing. Sounds like you need to replace the drive belt Part Number: PS11747978 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.

15 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Felisa
December 22, 2019
It is only 2yr old. When I start it the motor is running but the basket is not spinning and all the lights are off. So I unplug it to avoid overheating the motor. What could be the problem?
For model number MVWX655DW1
PartSelect logo
Hello Felisa, Thank you for the question. This could be a defective Control Board, PartSelect Number PS12114298. Electronic control board manages the washer's functions such as filling, washing, draining and spinning. Hope this helps!

14 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
David
January 30, 2020
How to remove coins caught in the slot/gap in the basin.
For model number MVWX655DW1
PartSelect logo
Hello David, Thank you for the question. You may need to remove the Washplate PartSelect Number PS11769534 to get access to remove the Basket and coins. We hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Ray
March 17, 2020
My washer doesn’t cycle out of wash cycle
For model number MVWX655DW1
PartSelect logo
Hello, Thank you for your question. You will want to check into the timer itself, that could be faulty and not allowing it to advance. We hope this helps.

6 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Common Symptoms of the MVWX655DW1

[Viewing 13 of 13]
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
Fixing Fixing
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
Fixing
Show All
Draining Issues
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Parts Used:
Drive Belt Washer Drive Pulley
  • Jerry from WALLA WALLA, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
85 of 115 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hub had warn its grooved teeth off and washer wouldnt agitate
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
Parts Used:
Drive Hub Kit
  • Allison from RICHFORD, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
48 of 63 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Parts Used:
Washer Drive Pulley
  • David from BLOOMINGTON, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
42 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!