Models > NED7200TW10

NED7200TW10 Amana Dryer - Overview

Sections of the NED7200TW10

[Viewing 4 of 4]

Manuals & Care Guides for NED7200TW10

Click to download
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.21
  In Stock
Heating Element – Part Number: WP35001247
Heating Element
★★★★★
★★★★★
(11)
PartSelect #: PS11741835
Manufacturer #: WP35001247
This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is u...
$151.86
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.52
  In Stock
Thermistor – Part Number: WP35001191
Thermistor
★★★★★
★★★★★
(3)
PartSelect #: PS11741828
Manufacturer #: WP35001191
This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
$84.69
  In Stock
Thermal Fuse with Bracket – Part Number: WP35001193
Thermal Fuse with Bracket
★★★★★
★★★★★
(3)
PartSelect #: PS11741829
Manufacturer #: WP35001193
This part is the replacement thermal fuse for your dryer. When you order this part, you will receive the fuse itself, as well as the bracket that mounts it to the dryer. The thermal fuse is approximat...
$58.72
  In Stock
Drum Support Roller with Axle – Part Number: WPW10177428
Drum Support Roller with Axle
PartSelect #: PS11749648
Manufacturer #: WPW10177428
Sold individually.
$72.98
  In Stock
Thermostat – Part Number: WP35001087
Thermostat
★★★★★
★★★★★
(1)
PartSelect #: PS11741821
Manufacturer #: WP35001087
This thermostat helps to regulate the dryer's internal temperature.
$65.97
  In Stock
Lint Filter – Part Number: WP35001141
Lint Filter
★★★★★
★★★★★
(5)
PartSelect #: PS11741824
Manufacturer #: WP35001141
This filter collects lint as it passes through the dryer vent.
$127.59
  In Stock
Drive Belt – Part Number: WPW10205415
Drive Belt
★★★★★
★★★★★
(7)
PartSelect #: PS11750299
Manufacturer #: WPW10205415
This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.
$100.45
  In Stock
Screw – Part Number: WPW10346892
Screw
PartSelect #: PS11753324
Manufacturer #: WPW10346892
12-14 X 5/8. Sold individually. Your appliance will most likely require 4.
$10.15
  In Stock
High Limit Thermostat – Part Number: WP35001092
High Limit Thermostat
PartSelect #: PS11741822
Manufacturer #: WP35001092
This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees...
$75.96
  In Stock
Heating Element Assembly – Part Number: WPW10222771
Heating Element Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS11750633
Manufacturer #: WPW10222771
This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is u...
$255.15
  In Stock

Questions And Answers for NED7200TW10

Ask our experts a question about this model and we'll get back to you as soon as possible!

9 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mistir
January 5, 2020
Error e5, dryer won’t start. Keep showing that error code.Thanks
For model number NED7200TW10
PartSelect logo
Hello Mistir, thank you for your question. We would recommend testing the PartSelect Number PS11741828 control thermistor. This error code is in relation to a bad thermostat or thermistor. If that is not the issue, we would recommend testing the other thermostats in the unit. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Richard
December 1, 2019
I am having difficulty removing the console portion of the dryer. As shown in an online video, the 4 screws were removed and the author of the video did say it was a little tricky and you had to press on the sides to remove it. I have tried that and more and in the process. I believe one of the l’asticot clips broke off. Before I proceed, I am looking for help before I continue to troubleshoot why my dryer does not put out any heat. Please help as my wife is impatient. Thanks.
For model number NED7200TW10
PartSelect logo
Hi Richard, Thank you for your question. If the dryer is not heating, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=NED7200TW10&mfgModelNum=&fkMfgID=1&ModelMasterID=118623&PID=19. If the video advised you press in on the console, there may be tabs holding it in place. You may have to try and pry the control panel off or try pressing one side to see if that side will release and then try the other side. If this does not work, you will need to contact the manufacturer for more information. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Marc
November 27, 2019
I have an Amana dryer and broke the spade connector replacing the heating element. Cant seem to find high temp replacement, they all are too small. Its bigger than 1/4 inch. It's been a pain in the ass. Please help fix this stupid/easy problem.
For model number NED7200TW10
PartSelect logo
Hello Marc, thank you for writing. The connector is a part of the wire harness, but sadly the wire harness for your model is discontinued. You will need to reach out to Amana directly for a substitution part number for the wire harness, or for the single connector. Please feel free to get back in touch with us if they provide substitution information. We look forward to hearing back from you!

Was this helpful?
Thank you for voting!
Scott
February 13, 2020
Dryer works fine, but randomly turns on and off every few minutes for hours. I keep hearing the little chime like when you open the door or hit the power button and it's driving me crazy! I can't find anything about it on internet searches. What's going on??
For model number NED7200TW10
PartSelect logo
Hi Scott. This sounds like it may be a bad control board. Thank you for your question and good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
Josheua
March 4, 2020
I have replaced heating element, thermostat, thermistor and thermal fuse.. i have proper voltage going to dryer. vacuumed out entire cabinet and lines are clear inside and going out the wall. what could possibly be the reason now for inconsistent drying and not properly heating up.
For model number NED7200TW10
PartSelect logo
Hello Josheua, thank you for your question. There is one other high limit thermostat which is High Limit Thermostat Part Number: WP35001092 that should be tested. If that part is tested and is fine the issue is probably with the electronic control board Electronic Control Board Part Number: WP35001153. I hope this helps.

Was this helpful?
Thank you for voting!
  • 1
  • 2

Common Symptoms of the NED7200TW10

[Viewing 1 of 1]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer did not turn when power was on.
Callled the service company to diagnose the problem. Watched him take machine apart. He found the problem. Told me the parts that I needed. Didnt know what they were. Went to partselect.com looked my model up and found parts and ordered. Followed same steps as repair guy: Two screws in back of machine then slide top off. Six screws in front to remove front door ( 4 screws on top 2 on bottom) Changed the thermostat and thermistor. Saved 320 dollars :)
Parts Used:
Thermistor Thermostat
  • JAMIE from VALLEY STREAM, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
53 of 65 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat in the dryer
Remove dryer covers and locate heater assembly. Removed heater assembly and checked visually if the heater coil is opened, I verified this with an ohm meter. Heater Continuity was OK. Next step I checked the heater sensors. Thermal fuse with bracket had no ohm meter reading between two terminals[open circuit]. Order part#35001193 "thermal fuse" with bracket from "partsSelect.com." Assemble back in reverse order. Please note that the dryer heater was filled with lint and needed a good cleaning.
Parts Used:
Thermal Fuse with Bracket
  • Walter from Lynden, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
53 of 81 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A faulty computer
First remove the top of this particular dryer, to get to the necessary screws. computer is located on the left side, and 3 screws frees it up. Then disconnect the wires. Unscrew the board, and replace!! That simple!! Unfortunately for me the bad computer melted part of the wire harness. I called maytag and drove them nuts untill they paid to replace the wire harness. I learned two simple lessons. Buy the cheapest appliances you can find because everything is made like crap these days, and if you must buy the more expensive appliances, get the extended warranty because everything is made like crap these days!!!!! Thanks partselect.com for the info, and discount prices!!
Parts Used:
Electronic Control Board
  • keri from lincoln park, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
37 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!