Models > NTW4610YQ0

NTW4610YQ0 Amana Washer - Overview

Sections of the NTW4610YQ0

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
  In Stock
Lid Latch Assembly – Part Number: W10404050
Lid Latch Assembly
★★★★★
★★★★★
(17)
PartSelect #: PS3497627
Manufacturer #: W10404050
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
$72.93
  In Stock
Tub Centering Spring - 2 Pack – Part Number: W10400895
Tub Centering Spring - 2 Pack
★★★★★
★★★★★
(8)
PartSelect #: PS3497596
Manufacturer #: W10400895
Tub centering spring
$10.01
  In Stock
Washer Drive Pulley – Part Number: W10721967
Washer Drive Pulley
★★★★★
★★★★★
(10)
PartSelect #: PS10057144
Manufacturer #: W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.12
  In Stock
Washing Machine Suspension Rod Kit – Part Number: W10780048
Washing Machine Suspension Rod Kit
★★★★★
★★★★★
(27)
PartSelect #: PS11703290
Manufacturer #: W10780048
$96.89
  In Stock
Shift Actuator - 120V 60Hz – Part Number: WPW10006355
Shift Actuator - 120V 60Hz
★★★★★
★★★★★
(12)
PartSelect #: PS11747977
Manufacturer #: WPW10006355
This part changes the transmission from agitation to spin mode. This actuator is for washers. Actuator shifts the splutch and monitors the position of the splutch.
$93.30
  In Stock
Drive Belt – Part Number: WPW10006384
Drive Belt
★★★★★
★★★★★
(5)
PartSelect #: PS11747978
Manufacturer #: WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
$27.47
  In Stock
Suspension Rod Support – Part Number: W10440729
Suspension Rod Support
★★★★★
★★★★★
(5)
PartSelect #: PS3502189
Manufacturer #: W10440729
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
$8.74
  In Stock
Washer – Part Number: WP3949550
Washer
PartSelect #: PS11742027
Manufacturer #: WP3949550
This part goes on the agitator retaining bolt.
$9.77
  In Stock
Washer Water Inlet and Valve Assembly – Part Number: WPW10683603
Washer Water Inlet and Valve Assembly
★★★★★
★★★★★
(11)
PartSelect #: PS11757114
Manufacturer #: WPW10683603
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
$110.61
  In Stock
Hose Clamp – Part Number: WP285655
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.11
  In Stock
Lid Latch Strike – Part Number: WPW10240513
Lid Latch Strike
★★★★★
★★★★★
(2)
PartSelect #: PS11750882
Manufacturer #: WPW10240513
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
$56.44
  In Stock

Questions And Answers for NTW4610YQ0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
May 8, 2023
During rise and spin cycles, if there is anything heavy such as towels, the tub bangs violently against the sides of the machine. With light loads, it seems to function ok. Does the weight of the water-soaked towels couse it to become unbalanced? What needs to be replaced?
For model number NTW4610YQ0
PartSelect logo
Hi Ken, thank you for the question. Based on the description that you have provided, we would recommend checking the suspension rod kit, part number PS11703290, to fix the issue. It supports the wash tub and keeps it stable during unbalanced loads. We hope this sorts out your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the NTW4610YQ0

[Viewing 12 of 12]
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lid Lock light blinking, machine will not start
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
Parts Used:
Shift Actuator - 120V 60Hz
  • David from Los Alamos, NM
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
312 of 389 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Violent shacking in spin mode.
Watched a video on the internet.
Parts Used:
Washing Machine Suspension Rod Kit
  • Terry from Homosassa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
182 of 221 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Defective lid latch - Cabrio Washer
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.
Parts Used:
Lid Latch Assembly
  • William from Wakefield, RI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
93 of 112 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!