Models > PLES389ECH

PLES389ECH Frigidaire Range - Overview

Sections of the PLES389ECH

[Viewing 7 of 7]

Manuals & Care Guides for PLES389ECH

Click to download
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: 316217002
Temperature Sensor
★★★★★
★★★★★
(26)
PartSelect #: PS820208
Manufacturer #: 316217002
Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$64.17
  In Stock
Order within the next 3 hrs and your part ships today!
Light Bulb – Part Number: 316538904
Light Bulb
★★★★★
★★★★★
(7)
PartSelect #: PS12751166
Manufacturer #: 316538904
Clear, 120 Volt, 40 Watt.
$25.17
  In Stock
Order within the next 3 hrs and your part ships today!
Door Hinge – Part Number: 318024747
Door Hinge
PartSelect #: PS2345318
Manufacturer #: 318024747
This hinge is located on each side of the oven door.
  No Longer Available
Main Terminal Block Kit – Part Number: 5304409888
Main Terminal Block Kit
★★★★★
★★★★★
(8)
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
$11.95
  In Stock
Order within the next 3 hrs and your part ships today!
LENS – Part Number: 5304524341
LENS
★★★★★
★★★★★
(10)
PartSelect #: PS16218465
Manufacturer #: 5304524341
This lens covers the interior oven light bulb.
$15.66
  In Stock
Order within the next 3 hrs and your part ships today!
Broil Element – Part Number: 318255605
Broil Element
★★★★★
★★★★★
(7)
PartSelect #: PS3506411
Manufacturer #: 318255605
Retrieving data. Wait a few seconds and try to cut or copy again.
$199.00
  In Stock
Order within the next 3 hrs and your part ships today!
Bake Element - 3400W – Part Number: 318254906
Bake Element - 3400W
★★★★★
★★★★★
(15)
PartSelect #: PS1992188
Manufacturer #: 318254906
This bake element is found on the bottom of the oven.
$253.34
  In Stock
Order within the next 3 hrs and your part ships today!
Dual Element with Limiter – Part Number: 316555800
Dual Element with Limiter
★★★★★
★★★★★
(10)
PartSelect #: PS2581859
Manufacturer #: 316555800
Dual Element with Limiter -9 Inch /6 Inch - 1300W 1200W. With this element, you can adjust the size of the burner you want to use to match your pots/pans.
$258.02
  In Stock
Order within the next 3 hrs and your part ships today!
GLASS – Part Number: 5304503232
GLASS
★★★★★
★★★★★
(10)
PartSelect #: PS11728351
Manufacturer #: 5304503232
This is also called the heat barrier glass.
$194.99
  In Stock
Order within the next 3 hrs and your part ships today!
RACK – Part Number: 318262516
RACK
★★★★★
★★★★★
(1)
PartSelect #: PS3495822
Manufacturer #: 318262516
$162.96
  In Stock
Order within the next 3 hrs and your part ships today!
Oven Light Socket – Part Number: 316116400
Oven Light Socket
★★★★★
★★★★★
(5)
PartSelect #: PS439060
Manufacturer #: 316116400
$67.38
  In Stock
Order within the next 3 hrs and your part ships today!
Convection Fan Blade – Part Number: 318398302
Convection Fan Blade
★★★★★
★★★★★
(2)
PartSelect #: PS3409337
Manufacturer #: 318398302
$28.70
  In Stock
Order within the next 3 hrs and your part ships today!

Questions And Answers for PLES389ECH

Ask our experts a question about this model and we'll get back to you as soon as possible!

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ruth
December 28, 2019
My oven has the warming drawer that can be set on low, med, or high. What temperatures do the settings reach. Thanks
For model number PLES389ECH
PartSelect logo
Hi Ruth, this information is not listed, all the information available is on page 15 of the manual. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Catherine
February 8, 2023
Oven stopped working, will not get hot. Stove top is working
For model number PLES389ECH
PartSelect logo
Hello Catherine, thank you for contacting us. Please check the temperature sensor, part number PS820208, and the bake element, part number PS1992188. You can test these parts with a multimeter for continuity. We hope this sorts out your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Mike
February 27, 2023
Everything was fine- oven AND burners. Then all of a sudden nothing would shut off! Had to turn off at breaker I suspect the control unit Thanks
For model number PLES389ECH
PartSelect logo
Hello Mike, thank you for contacting us. According to our research, you may need to check the temperature sensor, part number PS820208, with an ohm meter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080–1090 ohms at room temperature. If the issue persists, we recommend replacing the control panel, part number PS1529329. Good luck with the repair!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the PLES389ECH

[Viewing 7 of 7]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven not heating to desired temperature
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
Parts Used:
Temperature Sensor
  • Dan from Bellevue, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
150 of 232 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broil element wasn't working...
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.

I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking.
Parts Used:
Broil Element
  • Kevin from Alexandria, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
93 of 122 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Parts Used:
Main Terminal Block Kit
  • Timothy from Spring Valley, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
96 of 153 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!