Models > RTW4440VQ2

RTW4440VQ2 Roper Washer - Overview

Sections of the RTW4440VQ2

[Viewing 9 of 9]

Manuals & Care Guides for RTW4440VQ2

Click to download
Keep searches simple, eg. "belt" or "pump".
Agitator Directional Cogs – Part Number: 80040
Agitator Directional Cogs
★★★★★
★★★★★
(132)
PartSelect #: PS388034
Manufacturer #: 80040
These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
$5.60
  In Stock
Order within the next 30 mins and your part ships today!
Direct Drive Motor Coupling – Part Number: 285753A
Direct Drive Motor Coupling
★★★★★
★★★★★
(62)
PartSelect #: PS1485646
Manufacturer #: 285753A
This coupling kit is located between the motor and the transmission on direct drive washers with no belt. This is the newer version and is made with new metal sleeves for added strength.
$35.54
  In Stock
Order within the next 30 mins and your part ships today!
Agitator Repair Kit – Part Number: 285811
Agitator Repair Kit
★★★★★
★★★★★
(51)
PartSelect #: PS334650
Manufacturer #: 285811
The agitator kit is most commonly used if the top part of the agitator is not moving correctly but the bottom is. This kit now includes all pieces shown in photo plus the thrust spacer, inner cap seal...
$19.83
  In Stock
Order within the next 30 mins and your part ships today!
Suspension Spring – Part Number: WP63907
Suspension Spring
★★★★★
★★★★★
(4)
PartSelect #: PS11743345
Manufacturer #: WP63907
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could c...
$10.21
  In Stock
Order within the next 30 mins and your part ships today!
Clutch Assembly – Part Number: 285785
Clutch Assembly
★★★★★
★★★★★
(40)
PartSelect #: PS334641
Manufacturer #: 285785
A worn clutch can cause a slower spin speed which will leave your clothes wet after a cycle. This clutch assembly comes with brake cam driver, blue spring for large capacity washers and black spring f...
$38.04
  In Stock
Order within the next 30 mins and your part ships today!
Agitator Bolt – Part Number: WP358237
Agitator Bolt
★★★★★
★★★★★
(5)
PartSelect #: PS11741866
Manufacturer #: WP358237
This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
$8.97
  In Stock
Order within the next 30 mins and your part ships today!
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.21
  In Stock
Order within the next 30 mins and your part ships today!
Washer Lid Switch – Part Number: WP8318084
Washer Lid Switch
★★★★★
★★★★★
(17)
PartSelect #: PS11745957
Manufacturer #: WP8318084
The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the grounding wire.
$58.63
  In Stock
Order within the next 30 mins and your part ships today!
Washer Water Inlet Valve with Thermistor – Part Number: WPW10144820
Washer Water Inlet Valve with Thermistor
★★★★★
★★★★★
(29)
PartSelect #: PS11749042
Manufacturer #: WPW10144820
This part is used to help control and balance the water temperature flowing in to the washer tub.
$80.98
  In Stock
Order within the next 30 mins and your part ships today!
Thrust Spacer – Part Number: 285587
Thrust Spacer
★★★★★
★★★★★
(1)
PartSelect #: PS334562
Manufacturer #: 285587
This white thrust spacer is made of plastic and is also commonly referred to as a retainer ring. It is used in the agitator assembly of many direct drive washing machine models. This is the retaining ...
$8.44
  In Stock
Order within the next 30 mins and your part ships today!
Tub Wear Pads - Package of 3 – Part Number: 285744
Tub Wear Pads - Package of 3
★★★★★
★★★★★
(8)
PartSelect #: PS334620
Manufacturer #: 285744
This package of pads contains three tub wear pads.
$21.49
  In Stock
Order within the next 30 mins and your part ships today!
Seal, Inner Cap – Part Number: WPW10072840
Seal, Inner Cap
PartSelect #: PS11748108
Manufacturer #: WPW10072840
Also known as an O-Ring. This black o-ring seal is three inches in diameter.
$19.47
  In Stock
Order within the next 30 mins and your part ships today!

Questions And Answers for RTW4440VQ2

Ask our experts a question about this model and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose
December 9, 2023
My whaser water works and stops to the right level but don't wash or rinse the cloths don't spins either
For model number RTW4440VQ2
PartSelect logo
Hello Jose, thank you for getting in touch. Based on our research, the issue is most probably with the lid switch assembly, part number PS11745957. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning and agitating when the lid is open. Glad to be of help!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Larry
December 5, 2019
We have control set on cold/cold and we have warm water coming in
For model number RTW4440VQ2
PartSelect logo
Hello Larry, thank you for writing. This is likely due to a faulty Water Inlet Valve with Thermistor, part number PS11749042 for your model washer. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Emmett
August 25, 2022
Water will not shut off machine overflows
For model number RTW4440VQ2
PartSelect logo
Hello Emmett, thank you for your query. According to our research, about 90 percent of the time the overflow problem is caused by a faulty water inlet valve (part number: PS11749042). If the water inlet valve is alright, then you may need to check the water pressure hose (part number: PS11741846) and make sure it is not damaged. If you need any assistance regarding repairing or purchasing, customer service is available 7 days a week.

Was this helpful?
Thank you for voting!
Related Parts:
Sarah
April 4, 2024
Washer is making a weird noise when spinning but won’t drain and doesn’t continuously spin.
For model number RTW4440VQ2
PartSelect logo
Hello Sarah, thank you for your question! Make sure there are no items, such as clothing or debris, blocking the drain pump or the drain hose. Sometimes small items can get caught in these areas and prevent proper drainage. Ensure that the drain hose is not kinked, twisted, or clogged. Straighten out any kinks and clear any obstructions that may be preventing water from flowing freely. The drain pump may be faulty or clogged. You can visually inspect the pump for any visible obstructions. If the drain pump, part number PS11743427, appears to be clear, but the washer still will not drain, it may need to be replaced. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the RTW4440VQ2

[Viewing 16 of 16]
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing Fixing Fixing
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing
Show All
Water Filling Issues
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No movement from Basket & agitator
The job looked intimidating but turned out to be very easy.
First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pump.
The motor comes off next. Unplug the electrical connector from the motor and two wires from the capacitor. Remove the two screws holding the clamps in place and then pop off the two clamps. You will need to hold up the motor with one hand while you remove the clamps or it will fall to the floor once the clamps are removed.
One piece of the coupling assemble will be attached to the motor and the other will be attached to the gearcase drive shaft. If you want to clean up the mess created by the shredded rubber center piece of the coupling assembly you will have to take off the motor mounting plate. It is held on by two bolts and removing it makes installing the coupling easier but probably not necessary.
Push the back half of the coupling on to the gearcase drive shaft until the shaft is flush with the face of the coupling. Install the new rubber center piece on to the coupling then re-install the motor mounting plate. Install the other half of the coupling on to the motor shaft and lift the motor up to the coupling. You have to rotate the motor shaft by spinning the fan blades until the coupling lines up so you can slide it into the other half of the coupling. Then just reattach the motor, connectors and water pump in the reverse order of disassembly.
Parts Used:
Direct Drive Motor Coupling
  • Jeff from Wayne, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1091 of 1172 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer wouldn't agitate
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
Parts Used:
Agitator Directional Cogs
  • mike from Kent, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
931 of 1008 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper portion of agitator, no longer pushing clothing down.
The instructions came with the repair kit, it was fairly simple and straight foward.

One bolt held the entire agitator unit in the washer, as well as held the upper and lower halves together. Once that nut was removed the two halves seperated and the plastic clutch pieces could easily be replaced wtih the new onces in the repair kit.

Very easy do-it-yourself repair! Took about 20 minutes because I was being cautious. Next time I could do it in 5 minutes.
Parts Used:
Agitator Repair Kit
  • Matt from Pawtucket, RI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
796 of 829 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!