Models > RTW4641BQ1

RTW4641BQ1 Roper Washer - Overview

Sections of the RTW4641BQ1

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.21
  In Stock
Order within the next 50 mins and your part ships today!
Lid Latch Assembly – Part Number: W10404050
Lid Latch Assembly
★★★★★
★★★★★
(17)
PartSelect #: PS3497627
Manufacturer #: W10404050
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
$72.93
  In Stock
Order within the next 50 mins and your part ships today!
Washer Drive Pulley – Part Number: W10721967
Washer Drive Pulley
★★★★★
★★★★★
(10)
PartSelect #: PS10057144
Manufacturer #: W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.35
  In Stock
Order within the next 50 mins and your part ships today!
Drive Belt – Part Number: WPW10006384
Drive Belt
★★★★★
★★★★★
(5)
PartSelect #: PS11747978
Manufacturer #: WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
$27.47
  In Stock
Order within the next 50 mins and your part ships today!
Washer – Part Number: WP3949550
Washer
PartSelect #: PS11742027
Manufacturer #: WP3949550
This part goes on the agitator retaining bolt.
$9.80
  In Stock
Order within the next 50 mins and your part ships today!
Drive Block - 2 5/16 Inch High – Part Number: WP389140
Drive Block - 2 5/16 Inch High
★★★★★
★★★★★
(5)
PartSelect #: PS11741977
Manufacturer #: WP389140
This part is for large capacity belt drive and direct drive appliances.
$30.32
  In Stock
Order within the next 50 mins and your part ships today!
Washer Water Inlet and Valve Assembly – Part Number: WPW10683603
Washer Water Inlet and Valve Assembly
★★★★★
★★★★★
(11)
PartSelect #: PS11757114
Manufacturer #: WPW10683603
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
$110.98
  In Stock
Order within the next 50 mins and your part ships today!
Agitator Cap – Part Number: WP3355758
Agitator Cap
★★★★★
★★★★★
(1)
PartSelect #: PS11741199
Manufacturer #: WP3355758
This is the cap for your agitator.
$14.16
  In Stock
Order within the next 50 mins and your part ships today!
Hose Clamp – Part Number: WP285655
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.16
  In Stock
Order within the next 50 mins and your part ships today!
Lid Latch Strike – Part Number: WPW10240513
Lid Latch Strike
★★★★★
★★★★★
(2)
PartSelect #: PS11750882
Manufacturer #: WPW10240513
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
$56.62
  In Stock
Order within the next 50 mins and your part ships today!
Suspension Rod Kit – Part Number: W10780045
Suspension Rod Kit
★★★★★
★★★★★
(4)
PartSelect #: PS11703288
Manufacturer #: W10780045
$104.88
  In Stock
Order within the next 50 mins and your part ships today!
SEAL-TUB – Part Number: W10324647
SEAL-TUB
★★★★★
★★★★★
(2)
PartSelect #: PS3407958
Manufacturer #: W10324647
$70.82
  In Stock
Order within the next 50 mins and your part ships today!

Questions And Answers for RTW4641BQ1

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jake
May 26, 2022
How can I bypass the lid lock assembly
For model number RTW4641BQ1
PartSelect logo
Hi Jake, Thank you for your question. The easiest way to bypass the lid switch assembly, PS3497627, is to use a thin magnet. The magnet will cause the washer to think that the lid is closed. Before bypassing the lid lock assembly on your washer, unplug it from the electrical outlet and turn the water off. Then, using a putty knife, release the clips securing the top panel and open it. The lid lock assembly should be on the underside of the lid panel. Place the magnet where the lid switch comes in contact with the cabinet. Then put everything back together and turn the water on and plug the washer back into the electrical outlet. If the washer is still not working correctly, try repositioning the magnet. If you need to place an order for a new lid switch assembly, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the RTW4641BQ1

[Viewing 11 of 11]
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Defective lid latch - Cabrio Washer
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.
Parts Used:
Lid Latch Assembly
  • William from Wakefield, RI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
93 of 112 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Parts Used:
Drive Belt Washer Drive Pulley
  • Jerry from WALLA WALLA, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
84 of 113 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Parts Used:
Washer Drive Pulley
  • David from BLOOMINGTON, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
38 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!