Models > RXS216UO

RXS216UO (P1132414N) Caloric Wall Oven - Overview

Sections of the RXS216UO

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(28)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$14.96
  In Stock
Flat Style Oven Igniter – Part Number: 786324
Flat Style Oven Igniter
★★★★★
★★★★★
(7)
PartSelect #: PS387058
Manufacturer #: 786324
You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.
$74.47
  In Stock
2 Piece Broiler Pan – Part Number: 4396923
2 Piece Broiler Pan
★★★★★
★★★★★
(2)
PartSelect #: PS971245
Manufacturer #: 4396923
The top of this part is now black.
$47.83
  In Stock
SCREW – Part Number: 8169479
SCREW
PartSelect #: PS389899
Manufacturer #: 8169479
Sold individually.
$10.09
  Special Order
Frame Screw – Part Number: WP7101P126-60
Frame Screw
PartSelect #: PS11743908
Manufacturer #: WP7101P126-60
Sold Individually.
$9.89
  In Stock
Oven Control Knob – Part Number: Y0057451
Oven Control Knob
PartSelect #: PS2186761
Manufacturer #: Y0057451
Sold individually.
  No Longer Available
Clock Knob – Part Number: 0063441
Clock Knob
PartSelect #: PS8732
Manufacturer #: 0063441
This clock knob is less than an inch long. It is black in color and is made of plastic. This knob has a piece of decorative chrome on its top.
  No Longer Available
Oven Thermostat - Screws NOT Included – Part Number: Y0087635
Oven Thermostat - Screws NOT Included
PartSelect #: PS1748228
Manufacturer #: Y0087635
This part establishes and maintains the internal temperature of the oven cavity.
  No Longer Available
Gas Valve – Part Number: Y0066544
Gas Valve
PartSelect #: PS2187772
Manufacturer #: Y0066544
This gas oven safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range. This valve has a 3/8 of an inch inlet flare as well as a 3/...
  No Longer Available
DISCONTINUED – Part Number: 314764J
DISCONTINUED
PartSelect #: PS77098
Manufacturer #: 314764J
  No Longer Available
DISCONTINUED – Part Number: 314768J
DISCONTINUED
PartSelect #: PS77103
Manufacturer #: 314768J
  No Longer Available
BUMPER, RUBBER – Part Number: 0011061
BUMPER, RUBBER
PartSelect #: PS31
Manufacturer #: 0011061
  No Longer Available

Questions And Answers for RXS216UO

Be the first to ask our experts a question about this model!

Common Symptoms of the RXS216UO

[Viewing 5 of 5]
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them from the front. I was surprised to find plastic lugs covering the wire ends, rather than ceramic. I attached the new ignitor wires and reused the plastic lugs, as no ceramic ones came with the new ignitor. I carefully slid the new ignitor back into the cage/shield attached to the manifold and replaced the manifold. I then turned the gas back on and tested the ignitor (which worked perfectly) before replacing the oven plate. The repair took less than 30 minutes, but my wife and I thoroughly cleaned the door and interior while we had it apart. The hardest part was getting the door back on the hinges, but this too was accomplished after several attempts. The oven heats up beautifully now.
Parts Used:
Flat Style Oven Igniter
  • John from Niles, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
91 of 100 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not light
After the appliance store told me that the repair would cost about $500 to fix an oven that wouldn't light we didn't have the money to repair it or buy a new one so we went without an oven (only the oven) for almost 1 year. The igniter would glow but the oven would not light. my son found your site online and passed it on to me. It was so simple it's almost funny. I opened the oven door and removed the burner cover. Then reached in and removed the three screws that held the igniter in place. Turned off the gas, disconedted it so I could pull the stove out to get behind it. Found the wires to the igniter and undid the 2 wire nuts. Removed the igniter cover from the old one and slid it onto the new one. Be very careful because the igniter is very delicate and be sure to not toucjh the heating eliment. Slid the new part into place, reinstalled the screws, connected the new wires with the old wire nuts, reconnected the gas and turned on the oven. BAM it worked like a charm.
Parts Used:
Flat Style Oven Igniter
  • Rick from Laguna HIlls, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven ignitor stopped working (does this every 6-7 years)
First we removed the oven doors. Then removed the shelf that separates the oven from the broiler, giving us more room to work. At first we thought we needed to loosen the screws around the bracket holding the ignitor, but we realized that the burner needed to be removed. Lifting the burner up from the front gave us the room to pull it gently from the back of the oven wall, giving more room to pull the wires connected to the ignitor from the back of the oven wall out and then disconnecting them. Then carefully pulling the ignitor out of the bracket.

Putting the new ignitor in was easy. Carefully sliding it into the bracket, not touching the ceramic piece, connected the electric wires, pushed the wires back into the hole in the back of the oven. Then placing the burner back into place.

We then turned on the gas and the electricity and the ignitor glowed and the burner lit. PERFECT! In the past we've had a repair man come in and this time we saved $100. Even more perfect.
Parts Used:
Flat Style Oven Igniter
  • Jean from Manalapan, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!