Models > SCA1000DBB03

SCA1000DBB03 General Electric Microwave - Overview

Sections of the SCA1000DBB03

[Viewing 6 of 6]

Manuals & Care Guides for SCA1000DBB03

Click to download
Keep searches simple, eg. "belt" or "pump".
FUSE – Part Number: WB27X10928
FUSE
★★★★★
★★★★★
(1)
PartSelect #: PS1481237
Manufacturer #: WB27X10928
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
$16.70
  Special Order
Primary Door Interlock Switch – Part Number: WB24X10047
Primary Door Interlock Switch
★★★★★
★★★★★
(2)
PartSelect #: PS237015
Manufacturer #: WB24X10047
This interlock switch is located in the door latch.
$42.64
  Special Order
Halogen Bulb - 20W - 12V – Part Number: WB01X10239
Halogen Bulb - 20W - 12V
★★★★★
★★★★★
(2)
PartSelect #: PS951718
Manufacturer #: WB01X10239
Sold Individually.
$47.21
  Special Order
Glass Cooking Tray – Part Number: WB49X10129
Glass Cooking Tray
PartSelect #: PS956214
Manufacturer #: WB49X10129
There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.
  No Longer Available
Oven Cavity Temperature Cut-Out – Part Number: WB21X10046
Oven Cavity Temperature Cut-Out
PartSelect #: PS235672
Manufacturer #: WB21X10046
Also known as fuse.
$56.18
  Special Order
Diode Cable – Part Number: WB27X10037
Diode Cable
PartSelect #: PS239148
Manufacturer #: WB27X10037
$50.15
  Special Order
Door Latch Assembly – Part Number: WB10X10021
Door Latch Assembly
PartSelect #: PS230891
Manufacturer #: WB10X10021
This part is electrically designed for securing the door of the microwave while it’s in use.
$23.13
  Special Order
Halogen Light Bulb - 10W 12V – Part Number: WB36X10163
Halogen Light Bulb - 10W 12V
PartSelect #: PS247364
Manufacturer #: WB36X10163
Sold individually.
$42.54
  Special Order
Grease Filter – Part Number: WB06X10309
Grease Filter
PartSelect #: PS228019
Manufacturer #: WB06X10309
This filter is a genuine replacement filter for a microwave. It is metallic in color and measures about 7.7 inches wide and 5 inches tall. It features a finger tab for easy removal and installation. T...
$18.36
  Special Order
FASTENER – Part Number: WB2X9052
FASTENER
PartSelect #: PS243359
Manufacturer #: WB2X9052
  No Longer Available
Non-Stick Metal Tray/Pan – Part Number: WB49X10240
Non-Stick Metal Tray/Pan
PartSelect #: PS5573506
Manufacturer #: WB49X10240
$179.82
  Special Order
Magnetron – Part Number: 6324W1A001L
Magnetron
PartSelect #: PS3529034
Manufacturer #: 6324W1A001L
This part is used to generate microwave energy/heat.
$230.54
  In Stock
Order within the next 5 hrs and your part ships today!

Questions And Answers for SCA1000DBB03

Be the first to ask our experts a question about this model!

Common Symptoms of the SCA1000DBB03

[Viewing 7 of 7]
Won’t turn on
Fixed by
these parts
Fixing Fixing Fixing
Show All
No heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door not closing properly
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing Fixing
Show All
Door stuck closed
Fixed by
these parts
Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Parts Used:
FUSE
  • Kim from Cliffside Park, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
953 of 1228 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the two plastic latches broke off, disabling my microwave
I have a GE Advantium/micorwave oven. It is the model that has the hinges on the side, NOT the bottom. First, removing the door is necessary. The grill has to be removed first, then the door lifts right out. Next the plastic backing on the door has to be very carfully taken off to expose where the new latch has to be placed. Use a flat screw driver or putty knife to go around the permiter releasing the internal, unseen, plastic catches that hold it on. This should be done carefully, to avoid breaking the catches that you can't see. After the plastic is mostly removed putting in the spring is not too difficult, but a second set of hands is almost manditory.
Parts Used:
Door Latch Assembly
  • Dennis S. from Fremont, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
55 of 73 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door catch
Easy as pie!
1. Remove the 2 outer screws holding the top vent in place and remove the vent (it helps to have the door open)
2. Lift the door up, pull the top of the door away from the hinge and then list it up a little more to clear the bottom hinge.
3. Lay the door on the counter and with a putty knife, work your way around the perimeter of the door between the door and the inside bezel. The bezel is held in place with little tabs spaced evenly around the perimeter.
4. Once the bezel is off, the catch assembly is accessible. List it up against the spring pressure, and push it towards the outside of the door to release it from the frame.
5. Reverse procedure to install.
Parts Used:
Door Latch Assembly
  • Robert from Burlington, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
43 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!