Models
>
TMV151FBA
TMV151FBA Tappan Microwave - Overview
Sections of the TMV151FBA
[Viewing 4 of 4]Manuals & Care Guides for TMV151FBA
Click to downloadInstall
Installation Instructions
(5.52MB)
Install
Installation Instructions
(1.62MB)
Manual
Owner's Manuals
(2.47MB)
Manual
Owner's Manuals
(14.22MB)
Keep searches simple, eg. "belt" or "pump".
Questions And Answers for TMV151FBA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
December 18, 2019
Push buttons do not always work?
For model number TMV151FBA
Hello Michael and thanks for writing.
It certainly sounds like a faulty your control panel is faulty. This part is discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, part number PS1532533 Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Sandra
September 30, 2023
Microwave comes on but the plate is not turning and it’s not heating. What could be the problem?
For model number TMV151FBA
Hello Sandra, thank you for your inquiry. According to our research, there seems to be an error with the door interlock switch, part number PS1532482. It prevents the microwave from starting when the door is open. You may need to replace it to fix the issue. Glad to be of help!
Was this helpful?
Thank you for voting!
Agustin
December 17, 2019
Why does it turn on by itself
For model number TMV151FBA
Hello Agustin and thanks for writing.
One of the most common reasons why your microwave turns on by itself could be stuck switches. The interlock switch PS1532505 in the door may be stuck or in some cases, the interlock relay on the control panel could also be stuck. Make sure you either check this yourself or ask for professional help. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Related Parts:
Mary Brashear
December 31, 2019
Microwave was working fine and made two pooping noises and just quit
For model number TMV151FBA
Hello Mary, thank you for your question. That is probably caused by a blown thermostat. We would recommend testing the thermostats to determine if any of them have failed. If they are fine the issue could be with the control board. I hope this helps.
Was this helpful?
Thank you for voting!
Arnita
January 19, 2020
Trying to get the microwave glass plate
For model number TMV151FBA
Hello Arnita, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1532535. We hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
changing vent hood to otr microwave
Purchased an OTR microwave at discount at Lowe's. Display model, so was missing parts. Had to order damper from parts select. I had to moldify the transition part to attatch it to oven. I had to cut the opening, and bend flanges on the sides, and bore holes for screws. Then I had to create templates for attatching the unit to the cabinets and rear wall. After doing that, I turned off the electrical power, and removed the old vent hood. Removed a section of the existing vent pipe, to allow space for the transition unit and elbows. It was necessary to cut a larger opening in the bottom of the cabinet for the new vent and bore holes for the mounting screws. The old hood had a 6" round vent, and the new one is rectangular.After measuring and locating studs in the back wall, I secured the holding bracket to the wall, using long wood screws and molly bolts. I hooked the bracket into the bottom of the oven, and tilted it into place, inserting the attatching screws through the holes in the cabinet bottom into the threaded holes in the oven. After tightening the screws, checking for level, I attatched the transition unit to the vent opening above the damper. I then attached the transition unit to the existing vent pipe, installed a junction box with grounded outlet to the existing wiring. [The original unit was directly wired into the electrical circuit--the OTR unit has a plug on a power cord]. Restored power, tested unit, and all worked well.
Parts Used:
-
GEORGE from SPRING, TX
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit ran but would not heat food
-
Hector from Semmes, AL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!