Models > WZF34X20DW01

WZF34X20DW01 Whirlpool Freezer - Overview

Sections of the WZF34X20DW01

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.43
  In Stock
BULB-LIGHT – Part Number: W11338583
BULB-LIGHT
★★★★★
★★★★★
(9)
PartSelect #: PS12717432
Manufacturer #: W11338583
This is a genuine replacement light bulb for a refrigerator. The inside of your refrigerator should illuminate when you open the door. If your fridge does not illuminate, you may need to replace this ...
$61.92
  In Stock
Refrigerator Temperature Sensor – Part Number: WPW10383615
Refrigerator Temperature Sensor
★★★★★
★★★★★
(9)
PartSelect #: PS11753994
Manufacturer #: WPW10383615
This temperature sensor is for refrigerators. The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control. Unplug the refrigerator and s...
$52.50
  In Stock
Evaporator Fan Blade – Part Number: WP2169142
Evaporator Fan Blade
★★★★★
★★★★★
(2)
PartSelect #: PS11738973
Manufacturer #: WP2169142
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
$47.20
  In Stock
Screw – Part Number: WP489497
Screw
PartSelect #: PS11742758
Manufacturer #: WP489497
Sold individually.
$17.01
  In Stock
Foot Brake – Part Number: WPW10141622
Foot Brake
★★★★★
★★★★★
(1)
PartSelect #: PS11748978
Manufacturer #: WPW10141622
$14.16
  In Stock
Screw – Part Number: WP489478
Screw
PartSelect #: PS11742754
Manufacturer #: WP489478
Sold individually.
$6.88
  In Stock
Single Roller - Right Front – Part Number: WPW10515762
Single Roller - Right Front
★★★★★
★★★★★
(2)
PartSelect #: PS11755875
Manufacturer #: WPW10515762
Sold individually.
$64.94
  In Stock
Single Roller - Left Front – Part Number: WPW10515763
Single Roller - Left Front
★★★★★
★★★★★
(2)
PartSelect #: PS11755876
Manufacturer #: WPW10515763
Sold individually.
$65.55
  In Stock
Capacitor – Part Number: WPW10350564
Capacitor
PartSelect #: PS11753490
Manufacturer #: WPW10350564
$92.81
  In Stock
Toe Kick Plate - White – Part Number: WPW10534161
Toe Kick Plate - White
PartSelect #: PS11756055
Manufacturer #: WPW10534161
This kickplate grille is attached to the bottom of the refrigerator.
$90.58
  In Stock

Questions And Answers for WZF34X20DW01

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
PAUL
October 1, 2021
I just purchased this model stand-up; freezer. Can i purchase additional shelves for theh unit.Thanks
For model number WZF34X20DW01
PartSelect logo
Hello Paul, Thank you for your inquiry. We have researched the model number you have provided and there are two shelves available for your model, the upper one part# PS12731205 which measures 27-1/2 inches by 15-3/4 inches and the lower one PS11701774, which also measures 27 1/2 inches but is narrower from front to back. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the WZF34X20DW01

[Viewing 8 of 8]
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer not defrosting
Fixed by
these parts
Fixing
Show All
Frost buildup
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Fixing
Show All
Too warm
Fixed by
these parts
Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
Touch-Up Paint - White
  • Michelle from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
65 of 136 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original bracket foot brake screw hole was stripped and foot brake would not extend
The repair seemed simple, I just needed to remove the old bracket -- 4 screws -- and slip the new one on.

The tricky bit is that the roller bracket holds the weight of the fridge. So in order to make sure that the fridge did not fall over, and to keep the installation point off the ground so that I could align the screw holes, I needed to shim up the side of the fridge that I was working on.

To tap in the shims, I used a hammer and a spare chunk of wood. I ultimately used 3 shims, and kept tapping until the roller wheel could roll freely. Then I knew that the fridge was high enough. After that, it was pretty easy to remove the 4 screws, align the new bracket, and replace the screws. After that, in order to get the shims out I could just extend the foot brake as it was designed, and that lifted the fridge enough for me to easily slide out the shims. After that I just had to level out the fridge by adjusting the two feet.
Parts Used:
Single Roller - Left Front Foot Brake
  • Daniel from BOCA RATON, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken rear cabinet rollers
Removed the rear cardboard cover and cleaned the area around the compressor and as much of the condensor and fan area as possible. Removed the two base section securing bolts. Jacked the rear of the cabinet up enough to seperate the base from the cabinet. Removed the roller pins and removed and replaced both rollers. Lowered the cabinet back into place, replaced the base bolts and the cardboard cover. The rollers that were sent were of much better quality than the original plastic type and should last the life of the refrigerator. Be careful when moving the fridge as the original rollers may cut into or scratch the flooring.
Parts Used:
Cabinet Rear Roller - Kit of 2
  • Jeff from East Schodack, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!