Part Location Diagram of W10727360 Whirlpool Door Switch - 3 Terminal
See part 8 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Door Switch - 3 Terminal

 Fits your MMV5208WS1!
★★★★★
★★★★★
12 Reviews
$13.16
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MMV5208WS1!
PartSelect Number PS10057151
Manufacturer Part Number W10727360
Manufactured by Whirlpool
Product Description

Door Switch - 3 Terminal Specifications

This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heating properly or if it runs for a few seconds but turns off.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Won’t turn on | Door not closing properly | No heat | Doesn’t shut off
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool, Maytag, Amana, KitchenAid.
Part# W10727360 replaces these:
AP5950105, W10269457, W10727360VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.7
Filter By Rating:
  • 5 Stars
    9
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
Other Parts Used:
Interlock Support Top Interlock Support CAM-PLATE Door Switch Microwave Door Interlock Switch Interlock Spring
  • Mark from HOMER GLEN, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
118 of 141 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Open Message
Replaced both switches on the top door latch. Diagram shows the two switches on the lower latch? No success. Still had same message on the display. Replaced lower switch, fixed the issue.
Other Parts Used:
Door Switch Microwave Door Interlock Switch
  • Gordon from SELLERSBURG, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
20 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door open message...interior light not working when door opened....microwave would not work
Removed top vent panel....black plastic runs the length of the microwave....3 Phillips screws. Removed front right panel one Phillip screw on top right. Lift up to remove lifts off the catches. Unplug some of plug connectors on the back of the control circuit board to have room to swing it out of the way to gain access to the interlock switches. Take pictures of all disconnections and wire connectors removed from switches. There or two interlock banks of switches my problem was the top one. Remove the switch bracket held in with one star drive screw and a plastic catch on the switch bracket actuator...there is a slot in the frame the actuator slides into. Replace switches and reverse procedure to reassemble.
Other Parts Used:
Microwave Door Interlock Switch
  • Pat from LELAND, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
18 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
open door light wouldn't come on
issues started when door opened light would flicker then come on disassembled checked switches with a meter determined switch was faulty figured I'm in here replace them all because if one fails others will follow be careful removing actuator assembly plastic is brittle (remember this is above the stove subject to heating and cooling) plastic isn't as pliable installed all the switches perfecto oh by the way disassembled the faulty switch found contacts had arced from opening door while microwave is running use the buttons to stop will eliminate further issues
Other Parts Used:
Microwave Door Interlock Switch
  • David from HILLSBOROUGH, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave atempted to start the shut off
This site was correct in description of what was causing the problem.
I found broken white plastic parts in base of microwave, found they came from switch holder interlock support. Only reason it took me as long as it did is I did not make a diagram of the wires that I had removed.( would help to have easy access to wiring diagrams or have them on the internet ) But on the internet I found a Video by repairclinic.com the photo in the video pointed me in the right direction and allowed me to get my wiring in order the microwave then started up and runs correctly. As to the plastic parts found in the base of the unit, this unit was a floor model and probably had the door opened and slammed shut many times, breaking the Top interlock. Thanks to this site
Other Parts Used:
Top Interlock Support
  • William from SEAFORD, DE
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Failing Door Switch. Preventing unit from operating.
Removal of Phillip Head screws from Top vent and Control panel. Removed Torx head screw to remove entire switch assembly. Removed three wires to switch leads. Unclipped old switch. Replaced wires and inserted New switch in to clips. Attached assembly with Torx screw. Set Control panel back into place and screwed in top screw. Replaced upper vent with 2 screws.
Other Parts Used:
  • Eric from MIDDLEFIELD, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

29 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
December 26, 2017
I have a KitchenAid microwave that is less than 2 ears old. When we try to use it, we constantly get a message to open and close the door. Unfortunately, that never works. I found through trial & error, that if i jiggle the bottom plastic sensor of the door latch, i can sometimes get the microwave to work. I see that your parts list lists two parts called door switch terminal. Is that the part i need & which one is for the bottom latch? Thank you.
For model number KHMC1857BSS1
PartSelect logo
Hi Bob, Thank you for your question. If you are getting a message that is telling you to constantly open and close the door, then you will need to check all off the door switches to see which one is causing the issue. You will need to test each one with a ohmmeter. Use your ohmmeter to test your switch for continuity. Begin by setting your ohmmeter to measure resistance at a scale of Rx1. If you are using an analog meter, touch the metal tips of the test leads together and zero your ohmmeter by adjusting the thumbwheel in the front of the meter until the needle reads '0' on the scale. Touch one meter lead to the COM terminal and the other lead to the N.O. terminal. Do not push in on the actuator. Your meter should give a reading of infinity, meaning the circuit is open, and there is no continuity. Without moving the meter's leads, press down on the actuator until you hear a 'click'. With the 'click' of the actuator, the meter should produce a resistance reading of zero ohms. This means the circuit is closed and continuity is present. The presence of a distinct 'clicking' noise is evidence that your switch is working as it should. Be that as it may, switches with only two terminals do not 'click' when actuated. Keep the meter lead that is touching the COM terminal in place, but move the other meter lead from the N.O. terminal to the N.C. terminal. You should receive a reading of infinity when you push in on the switch's actuator. When the actuator is released, you should receive a resistance reading of zero ohms. Now, set your ohmmeter to its highest resistance scale and touch one meter lead to the N.O. terminal and the other meter lead to the N.C. terminal. The resistance reading between these two leads should be infinite. Finally, take a resistance reading from both the N.C. terminal and the N.O. terminal to any metal mounting hardware that is a part of the switch assembly. You should receive a normal reading of infinity. Any readings that differ from the ones presented here are indicative of a defective door switch that will need to be replaced. I hope this helps. Thank you and have a great day!

33 people found this helpful.

Was this helpful?
Thank you for voting!
Johnny
April 30, 2018
Need some help thinking that it was my fuse it's not i try that already .Ok here's my problem when ever i close the door an set the mircowave to heat up my food i hear a 'click ' noise then it shutts off right away. And can you please tell me were is this black switch located at?
For model number WMH32L19AS1
PartSelect logo
Hello Johnny, thank you for your question. It sounds like the door switches are failing in your unit. There are three door switches that work together to allow the unit to work. They send a signal to the board that the door is closed and the unit can be turned on safely. They are located just inside the unit where the door closes. Usually you have to remove the top grille vent, and the top screws that hold the control panel face on. When the control panel is removed the black door switches will be visible in a plastic holder. The part numbers for the switches are Door Switch Part Number: PS2361111, Door Switch PartSelect Number: PS2361113 and Door Switch - 3 Terminal PartSelect Number: PS10057151. I hope this helps!

17 people found this helpful.

Was this helpful?
Thank you for voting!
Andrew
September 9, 2019
The microwave only works sometimes. If the light inside does not turn on the microwave will not start. If the light is on all is fine. I assume it may require a new door switch to supply proper power.
For model number wmh53520cs-5.
PartSelect logo
Hi Andrew, thank you for your question. Yes, that would be my first suggestion. Check all of the door switches for your door and make sure they are working correctly. You can do that test with a multi meter. I hope that helps. Good luck with your repair.

8 people found this helpful.

Was this helpful?
Thank you for voting!
Howard
January 24, 2018
Turntable runs all the time when the door is open
For model number WMH31017AB-0
PartSelect logo
Hi Howard, Thank you for your question. If your turntable is still running when the door is open, the issue is with the door switches and they will need to be replaced. I hope this helps. Thank you and have a great day!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Stephen
February 7, 2018
Occasionally, when the door is open, the interior light flickers. The flickering is accompanied by a sound resembling a relay opening and closing. Also, occasionally, the interior light will not even turn on which means that the unit will not operate until we open and close the door several times to get the light to turn on. I have checked operation and continuity of the three switches and they all seem to be operating correctly.
For model number WMH31017FB0
PartSelect logo
Hi Stephen, Thank you for the question. I suggest checking to make sure the door is level. Also check the door hooks to make sure they are not loose. If the hooks do not go into the interlock that holds the switches, it will not engage the switches properly and cause the issues you are having. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Harold
May 28, 2019
Turntable turns, light stays on when you shut the door. You can smack the side and it stops turning,light goes out. Open the door, turntable stops, light stays on. Microwave heats and works fine. I think my problem is in a switch?
For model number WMH1164XWS1
PartSelect logo
Hello Harold, Thank you for the question. Yes, I agree it should like one or more of the switches are defective or loose. I suggest testing them with a multi meter for continuity and to ensure they are secure in the bracket. Thank you for your inquiry, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Craig
December 11, 2019
The white door latches held in by 1 screw on each on the front panel were not working. I used a screw driver to prod and both latches broke and went into inside of unit. I need to know if i just need to by the door latches, their part numbers and how many of each part i.E. Quantity of each.
For model number YMMV-4205-DS-0
PartSelect logo
Hello Craig, thank you for writing. This sounds like you are describing the Door Latch, part number PS11722531 for your model microwave. There are two of them on the unit, and they are sold individually. Good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
John
September 25, 2019
Control pad shows F6.
For model number KHMC1857BSS0
PartSelect logo
Hi John, Thank you for your question. The F6 error code is letting you know that you have a relay failure. The relay is part of the electronic control board and you may have to replace it. You can try to unplug the microwave for a few minutes and then try it again. If the error repeats then the control will have to be replaced. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Steve
February 1, 2018
I purchased my microwave in feb 2013. It stopped running. I want to do a continuity test on the door switches before i order parts. To get at them i have to remove the plastic control panel backing which has one screw at the bottom (easily accesible) and 1 screw that comes down from the top into the panel backing. How do i access the top screw so that i can remove it?
For model number KHMS2040BSS
PartSelect logo
Hi Steve, Thank you for your question. You would remove the vent grill that is above your door and that should reveal the screw up there so that you can unscrew it. To remove your grille above your door you would have to remove the two screws at the top. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Merle Morphy
June 25, 2019
Door will not stay latched shut,
For model number YWMH31017AW-3
PartSelect logo
Hello Merle, thank you for your question. If the door will not stay latched shut, check the latches on the door itself to see if you can bend them open a bit. If not, the door would have to be replaced. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10057151
Manufacturer Part Number: W10727360
Brand
Model Number
Description
Amana
AMV1150VAB0
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAB1
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAB2
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAB3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAB4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAB5
Microwave - MICROWAVE
Amana
AMV1150VAB6
Microwave - MICROWAVE/HOOD COMBO
Amana
AMV1150VAD0
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAD1
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAD2
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAD3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAD4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAQ0
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAQ1
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAQ2
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAQ3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAQ4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS0
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS1
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS2
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAS5
Microwave - MICROWAVE
Amana
AMV1150VAS6
Microwave - MICROWAVE/HOOD COMBO
Amana
AMV1150VAW0
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAW1
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAW2
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAW3
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAW4
Microwave - MICROWAVE OVEN 1.5 CU. FT.
Amana
AMV1150VAW5
Microwave - MICROWAVE
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service