Part Location Diagram of W10823511 Whirlpool Water Tube Kit
See part 18 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Water Tube Kit

★★★★★
★★★★★
2 Reviews
$45.83
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11730901
Manufacturer Part Number W10823511
Manufactured by Whirlpool
Product Description

Water Tube Kit Specifications

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Ice maker not making ice | Not dispensing water
This part works with the following products:
Refrigerator, Ice Maker, Freezer.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Amana.
Part# W10823511 replaces these:
AP5989588, 1105233, 1108197, 1108348, 1111250, 1112556, 1113158, 1113159, 1113371, 1113372, 1119096, 2001259, 2001321, 2001322, 2155294, 2172593, 2174662, 2181940, 2181941, 2181942 ... Show more , 2181943, 2181944, 2181945, 2181946, 2181947, 2181948, 2183156, 2202587, 2204332, 2205746, 2208933, 2210514, 2210517, 2223137, 2252393, 2304859, 2314045, 2314046, 2314047, 4339669, 4339975, 4340032, 4340070, 4341083, 4341084, 4342775, 4343701, 4344404, 4387492, 482003, 483202, 627665, 653200, 653415, 653499, 659811, 758037, 758581, 8170412, 8170934, 8208151, 831304, 836240, 836241, 839060, 839063, 840124, 840125, 840860, 842775, 844847, 845998, 849986, 849987, 867089, 867194, 867200, 937669, 937680, 937681, 939010, 939011, 940828, 944681, 977049, 977052, 983370, 987053, 988220, 992584, 992585, B5705311, B5705315, B5705323, W10175644, W10357068, W10357069, W10357076, W10437857, W10823511VP Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 9 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
water dispenser started leaking
i wasn't sure it was the inlet valve unit because the leak was at the water dispenser in the freezer door. after some research it looked like the water inlet valve located in the back lower part of the refrigerator was the problem. to replace, take off the cardboard cover, about 6 screws, you have access to the water inlet valve, disconnect the hoses (i think it goes without saying that you should have turned off the water to the frig) replace the inlet valve, connect hoses, turn water back on and you'll be back in business. very easy repair.
Other Parts Used:
Ice Maker and Water Dispenser Dual Inlet Valve
  • Trent from Tacoma, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
70 of 107 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Ice maker would not work.
We rolled the refrigerator out away from the wall and it was obvious where the break was located. We took out the old water spout for the ice maker and replaced the tube and the tubing from the solenoid. We turned it on and soon we had water dripping everywhere. We unloaded and defrosted the freezer which got all of the remaining ice that was stuck in there. We put everything back together. I read in some instructions in the manual that it might take 24 hours for the ice maker to reprogram itself and start producing ice. I was only about 12 hours and we had ice again and everything worked well. You really do not have to disconnect the water from the main line, the solinoid controls that part of operation and turns the water off until the ice trays are free and clear.

JLB
Other Parts Used:
Ice Maker Water Fill Tube Kit
  • Jerry from Boulder, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
22 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water began to leak under the refrigerator. Source looked like it was coming from control valve suppling water to ice maker and water dispenser.
Followed instructions supplied. It was relatively easy and the parts fit exactly right. Sears wanted twice as much for the part and service would have charged me another $100 to come to my home. I saved over $100 doing the project myself.
Other Parts Used:
  • jesse from hacienda heights, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
21 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
35 year old water tube became brittle and cracked; leaking water
Unscrewed clamp holding water tube to refrigerator ice maker. Pulled water tube from ice maker and water valve inlet. Cut the new tubing to the exact same length and inserted one end to the water valve inlet and the other end to the ice maker then screwed clamp holding water tube back to the refrigerator ice maker.
Other Parts Used:
  • Melvin from OPELIKA, AL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaked when the paddel was pushed
Followed the video on parts page. I was worried I would brake the cover but learned from the video the right way to remove the front plate. I found the video very informing. Thank you for saving me a service call and the part cost was minimal compared to a new refrigerator .
Other Parts Used:
  • Monica from EDMOND, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts were old
Watched the video
Other Parts Used:
Water Line Filter Inlet Water Tube Water Dispenser Fitting and Tube Assembly
  • Dito from LOS ANGELES, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker not making ice and water leaking from ice maker line
Initially I though we had a bad water inlet value and possible ruptured/cracked water line to the icemaker. Once I replaced the water inlet value, water continued to leak from top connection of the hose into the ice water fill tube and at bottom connection into the dual water inlet value. I discovered by reading back through PartSelect's troubleshooting and answers that the problem might be the ice water fill tube. Once I removed it (2 screws and some tugging) it came right out. I saw that it was frozen solid with a plug of ice restricting water from filling the ice maker. I used my wife's hair dryer to melt the ice plug and reattach. Within 30 minutes we had our initial batch of ice. I did in the end have to replace the water line between the water inlet value and the ice maker to get the water leak repaired. I've returned the water inlet value to PartSelect for credit.

Great Job PartSelect from a satisfied customer
Other Parts Used:
Water Inlet Valve - 120V
  • James from BARTLETT, TN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker leaking water, and not making ice
Remove the cardboard back cover and the vertical metal strip, all the screws are the same on the back. Remove the front bottom cover, those screws are all the same but longer. The tubing is bad because they tucked it in on the side and it rubbed and wore a hole in it. Remove the tubing nut. You may notice that there is an insert in the tubing, but the new tubing has no insert because it is thicker walled and does not the insert because it is stronger. The nut and compression ring are one piece. Open the front door and pull the tube out of the metal plate to the left, and cut the tube off at the end to remove the metal ring, and to make it easier to pull it out. Pull the tube out from the back, but first carefully remove the sticky gray putty, and put it aside. You might also bend the copper line to the right a little if it is putting pressure on the tube at the top of the unit. Now pull the tubing out, and use it to make the new tube the proper length, You might also want to first tape the new tube to the old tube to fish it through. I did not. It was tricky fishing the tube in from the back of the unit to the resevoir. If you do it my way, then aim it to the right. I got it on the second try and felt lucky. Once you get the tube in there, put the metal ring back on the new tube, and press it into the metal plate to the right. You can feel the groove and hole in the metal plate. I think the metal ring goes under the plate, but honestly I don't think you need the ring on the new tube because it has a thicker wall and is stiffer, so it won't pop out. Make sure you put the putty back in once you have completely installed the tubing. I think this is important to keep the tubing from sweating and to help keep the ice bin cold, like insulation. Do not put the tubing back along the left side of the unit, or you will be replacing it again, but maybe not with the thicker walled tubing. When you are all done, check to make sure your sump pump works by pouring water into the ice tub, if it is plugged in and you do not hear the pump, or the water backs up, then your pump may be bad. I also pulled a piece of white plastic out of the clear tubing just above the pump and never did find where that came from, but it would have been from the ice bin. I then ran a cleaning cycle and the instructions say if there was water still in the resevoir, then do another cleaning. My resevoir was full, so I did another cleaning. IF YOUR RESEVOIR IS FULL, THEN YOU NEED A NEW UPPER PUMP! Mine is on order. Mine was full after both cleanings, and after trying to make ice, I realized what the problem was. It could be that it is very clogged, but they don't appear to be serviceable, and I never heard it try to run. I did hear the lower pump, compressor, and fan all run previously, so I hope that when the new pump is installed, the unit is not low on refrigerant or anything like that. Fingers crossed, and good luck.
Other Parts Used:
Affresh Ice Machine Cleaner
  • Jason from CHAMPAIGN, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Water Nozzle at Door
(1) Ordered PS371704 from PartSelect! Best advice EVER! (2) Unplugged refrigerator (since the water solenoid on the back of the refrigerator is powered to switch ON the water, you NEVER have to turn off the water!) (3) Pull off the refrigerator's bottom grill. (4) With a small saucer under the fittings, unscrew the black and white tube fitting. There is only one nut to remove on the white tubing side. You'll need to undo the compression fitting on the black tubing and slide off the compression nut. You'll need to MAKE SURE you keep these nuts and replace onto the black and white tubing the SAME WAY you took them off. You'll NOT need to use nut drivers as finger tight is the key. Too hard and you'll ruin these plastic nuts. You should get only about 1/8 cup or less of water during this whole exercise. (5) Cut off the old, broken water nozzle. (4) Find a screw of the appropriate size to fit tightly 1/2 way inside the new tubing (this is to ensure your old and new tubing are connected to feed through the door). If screw is not tight within the tubing, wrap part of a plastic (thin) sack around this screw a couple of times and force into the tubing. You'll, of course, then need to use the hacksaw to cut the head off the screw as you'll be forcing the other half of the screw into the old cut tubing (6) Chase the dog out of the kitchen and cajole your wife (significant other) to push the newly joined tubes through the top of the dispenser, through the door and out the bottom as you will be gently PULLING on this old tubing from the bottom until the new tubing pops through the doors bottom. (7) Once this new tubing is out, you will separate the old tubing and, using the nuts in the proper sequence, connect this new tubing to the white tubing. (8) Plug the refrigerator back in and test flow the water. Check to ensure the plastic nuts have no leakage ... button up the bottom grill ... and enjoy the fresh water! PS> Don't forget to praise the wife (significant other) and give the dog a treat for staying out of your face!!
Other Parts Used:
  • Chris from Brentwood, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

33 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rickey
December 22, 2017
I need the plastic water line that connects the main water line to the water filter housing,the small tapered end to the housing has a small hole and is leaking.I have replaced the housing.
For model number MSF25D2EAB00
PartSelect logo
Hello Rickey, Thank you for your inquiry. The part number to the water filter inlet tube is WPW10281289, which brings the water into the water filter. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Chrisie
January 23, 2020
What causes the fill tube for the ice maker freeze up? We have replaced the ice maker.
For model number 106.56586500
PartSelect logo
Hello Chrisie, Thank you for the question. The Ice maker Full Tube freezing up can be caused by a frozen ice maker fill tube, faulty water inlet valve, too low freezer temperature setting, or a water filter that needs replacing. Hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Lawrence
February 5, 2018
Water leaks under the front of my refrigerator. It happens when i activate the water dispenser inside the refrigerator. I have replaced the inlet water valve, and none of the exterior tubing is leaking. What else could be the cause for the leak, and what parts are available? Also there is a 2 to 5 sec interval when air comes out of the dispenser before the water flows. Could there be a leak in the tubing as it enters or exits the water filter?
For model number ABC2037DTS
PartSelect logo
Hello Lawrence, thank you for your question. I would suggest checking Water Filter Head with Tubing part number WP67006524. There is a good chance the water is leaking from there. Also, be sure you are using a compatible filter in your appliance. Aftermarket filters can sometimes not fit properly, and leak. I hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Charles
April 2, 2019
Can the water supply tubing that runs through the freezer door to the ice maker and water dispenser be replaced?
For model number ED2DHEXWB00
PartSelect logo
Hello Charles, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11730901. Thank you for your inquiry, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
October 3, 2017
Water leaking from back of freezer under the cold air outlet sheet of ice in freezer
For model number WRT771REYW00
PartSelect logo
Hi Michael, Thank you for your question. There could be a couple of parts that would cause that issue. I would suggest looking at your ice maker and looking at the fill tube to the ice maker. It is possible that leaking is being caused because your fill tube is clogged with ice. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Imani
November 11, 2019
Does this part come with a filter or is a filter a part of the water/ice dispenser?
For model number WRS322FDAB01
PartSelect logo
Hello Imani, thank you for your question. The filter listed for this unit is PartSelect Number: PS11701542. It is attached into the filter housing, which then dispenses the water into ice maker and dispenser. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Les
February 6, 2020
Please tell me the length
For model number PS11730901
PartSelect logo
Hi Les. They are about 72 inches in length. Thank you for your question and good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Gilbert
April 24, 2023
Where is the drain for the defroster. During defrost the water trickles into the fridge where the cold air enters the fridge compartment from the freezer. Is there a drain tube and where is it located.
For model number ET21CMXJW00
PartSelect logo
Hi Gilbert, thank you for reaching out. The defrost drain hole is located in the freezer. In order to get access, remove the cover inside the freezer. Locate the defrost drain hole near the evaporator coil. Check if the drain tube is clogged or not. We hope this information is useful!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Mary
April 15, 2022
Will this tubing fit my SubZero 700TFI, with part number 4200520 ice maker? It requires 1/4" OD tubing to fill the ice maker. Mine has melted in half due to heat. I am not looking for the ice maker kit that attaches to the water source in the wall to the freezer.
For model number 4200520 SubZero Ice Maker
PartSelect logo
Hello Mary, thank you for writing. We do have the part PS11747816 which is 1/4" Plastic tubing, 8 1/2 feet long. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Antonio
March 18, 2018
I cannot find the water tube inlet (always associated with the number 16) for my refrigerator, just the valve. My refrigerator is leaking due to a problem on the tube inlet. How can I buy it or what alternative do you propose to fix the problem?
For model number TFX24RL
PartSelect logo
Hello Antonio, Thanks for your question. The water inlet tubing is part number PS292347 for your model. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11730901
Manufacturer Part Number: W10823511
Brand
Model Number
Description
Kenmore
1064650042713
Refrigerator - Kenmore 1064650042713 Side By Side Refrigerator
Kenmore
1064650043713
Refrigerator - Kenmore 1064650043713 Side By Side Refrigerator
Kenmore
1064650043714
Refrigerator - Kenmore Refrigerator 1064650043714
Kenmore
1064650049713
Refrigerator - Kenmore 1064650049713 Side By Side Refrigerator
Kenmore
1064650049714
Refrigerator - Kenmore 1064650049714 Side By Side Refrigerator
Kenmore
1064651752714
Refrigerator - Kenmore 1064651752714 Side By Side Refrigerator
Kenmore
1064651753713
Refrigerator - Kenmore 1064651753713 Side By Side Refrigerator
Kenmore
1064651759713
Refrigerator - Kenmore 1064651759713 Side By Side Refrigerator
Kenmore
1064689482991
Ice Maker
Kenmore
10647021790
Refrigerator
Kenmore
10647021791
Refrigerator
Kenmore
10647022790
Refrigerator
Kenmore
10647022791
Refrigerator
Kenmore
10647028790
Refrigerator
Kenmore
10647028791
Refrigerator
Kenmore
10650022000
Refrigerator
Kenmore
10650022001
Refrigerator
Kenmore
10650022002
Refrigerator
Kenmore
10650022003
Refrigerator
Kenmore
10650022004
Refrigerator
Kenmore
10650027000
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650027002
Refrigerator
Kenmore
10650027003
Refrigerator
Kenmore
10650027004
Refrigerator
Kenmore
10650029213
Refrigerator - REFRIGERATOR
Kenmore
10650032000
Refrigerator
Kenmore
10650032001
Refrigerator
Kenmore
10650032002
Refrigerator
Kenmore
10650032003
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service