Part Location Diagram of W10853654 Whirlpool Water Inlet Valve - 120V
See part 10 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Water Inlet Valve - 120V

★★★★★
★★★★★
4 Reviews
$184.33
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11731255
Manufacturer Part Number W10853654
Manufactured by Whirlpool
Product Description

Water Inlet Valve - 120V Specifications

This water inlet valve is for the ice maker and water dispenser in the refrigerator. To remove outlet tubing, depress ring that the tube slides into. Please remember to disconnect the power and water supply to the refrigerator before starting the repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Ice maker not making ice | Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# W10853654 replaces these:
AP5989758, 2155062, 2181706, 2181707, 2181729, 2181730, 2181731, 2181926, 2181927, 2182106, 2188676, 2188778, 2188924, 99989714, WP2188924
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
3.8
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 7 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The in-door water dispenser stopped working but the ice continued to work.
I first had to identify the faulty part. I ohms checked the micro switch in the door. It was fine. I traced the wiring to the inlet valve at the bottom of the rear of the unit. I checked the voltage to the solenoids and it was good. After checking the schematics on the Whirlpool website, I determined the only possible faulty part was the inlet valve. I found the correct part here on PartSelect and ordered it. When the part arrived I changed out inlet valves by turning off the water supply, unplugging the refrigerator, removing the two inlet valve mounting screws, and disconnecting the wire terminals. The inlet water line was a 1/2" compression nut and the water and ice outlets were hand turn compression nuts. I reversed the removal steps to install the new valve, turned the water on, checked for leaks, plugged in the refrigerator, and the new valve worked perfectly. The feeling of accomplishing a DIY project was only topped by a happy wife who really didn't want to spend the money on a new fridge!
Other Parts Used:
  • Roger from MOUNTAIN HOME, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench set
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Inlet Valve
The installation was very easy.
Unplug the refrigerator.
Turn off the water supply and disconnect from the old valve.
Remove the old valve and disconnect power connectors for each valve, disconnect the Ice maker water tube and the Water dispenser tube.
Because of the new replacement part, I needed to cut the threaded connectors off of the water tubes. Carefully make straight cuts.
Insert the tubes into the correct inlet valves, make sure they are inserted properly, 1 for ice maker, 1 for water dispenser.
Connect the power connectors to the new valve.
Mount the valve onto the refrigerator.
Connect the water supply.
Turn on the water supply valve. Check for leaks.
Plug in the refrigerator.
Test water dispenser and then ice making capabilities.

Seems like a lot of steps, but they are logically connected for this repair. Easy replacement.
Other Parts Used:
  • Robert from MORAGA, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had ice build up the size of a football in the ice maker. Water valve wasn't shutting off.
First we knew that the water valve wasn't shutting all the way off with all that ice build up. So we shut off the water. We defrosted the refrigerator! Let it stand open door all night. Checked the new water valve with the old one and exact fit. Cut off the water lines as the new valve had push fittings. The main feed line was still compression fitting. We added a new in-line water filter as there was no filter on the old valve water supply line. So hope this helps with the new valve life. Was an easy fix and any handy man can do this job.
Other Parts Used:
  • James from DENISON, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker not making ice and water leaking from ice maker line
Initially I though we had a bad water inlet value and possible ruptured/cracked water line to the icemaker. Once I replaced the water inlet value, water continued to leak from top connection of the hose into the ice water fill tube and at bottom connection into the dual water inlet value. I discovered by reading back through PartSelect's troubleshooting and answers that the problem might be the ice water fill tube. Once I removed it (2 screws and some tugging) it came right out. I saw that it was frozen solid with a plug of ice restricting water from filling the ice maker. I used my wife's hair dryer to melt the ice plug and reattach. Within 30 minutes we had our initial batch of ice. I did in the end have to replace the water line between the water inlet value and the ice maker to get the water leak repaired. I've returned the water inlet value to PartSelect for credit.

Great Job PartSelect from a satisfied customer
Other Parts Used:
Water Tube Kit
  • James from BARTLETT, TN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Valve was leaking water all over
Unscrewed 2 screws holding valve to fridge, disconnected the electric wires and water line. Pulled valve out and cut water tubes and inserted into new valve and reconnected all electric and water. Icemaker works great and no leaks.
Other Parts Used:
  • terry from ORLAND PARK, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water flow to ice maker.
removed old valve installed new one
Other Parts Used:
  • Herbert from WINFIELD, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ice/ no water from the water dispenser
I closed the water valve under my kitchen sink feeding the inlet valve, then moved fridge forward, removed cardboard cover used nut driver. removed water inlet valve. The water lines on the old valve had connections with nuts threaded on. On the new valve just needed inserting the water lines all the way in. Re- mount the valve and install the cardboard cover. open the water. ready to go. Then I pushed the fridge back to its place.
Other Parts Used:
  • Francisco from EL PASO, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

18 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gregory
August 2, 2017
No water is going into the ice maker yet the door water dispenser still pumps water. Can the water valve pump be faulty if the door water dispenser still works? Fyi the ice maker still rotates and the fill tube is not frozen or blocked.
For model number ED5GTQXKT00
PartSelect logo
Hi Gregory, Thank you for the great question, yes the valve is a dual valve, one side for the ice maker and the other for the dispenser. One side can become defective and effect just the ice maker. I suggest replacing the Water Inlet Valve part number PS11731255. Hope this helps!

18 people found this helpful.

Was this helpful?
Thank you for voting!
Guy
December 6, 2018
Ice maker works great. But when I get water through the door, the water doesn't totally shut off when I take the full glass away. I checked the micro switch by just looking at it, it looks fine and sounds fine when arm is depressed. Could it be that the valve the micro switch operates is bad and needs to be replaced or cleaned out?
For model number KSRS25QDWH03
PartSelect logo
Hello Guy, Thank you for the question. This sounds like the Water Inlet valve is Stuck open and allowing water to flow through to the dispenser. I suggest replacing the valve. Thank you for your inquiry, good luck with this repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Thomas
December 18, 2018
I change the water inlet valve and forgot which hose goes where. Can you help me with this issue
For model number 106.57572791
PartSelect logo
Hi Thomas, thank you for your question. It looks like the green side would be for your ice maker tube and the red would be for your water inlet valve. The tubes are not the same size and the connections on the solenoid are also different in size as well to reflect that. The water dispenser tube is usually the smaller of the two. I hope that helps. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
John
December 13, 2017
Ice maker rotates and goes through cycle but there is no water in tray to make ice. I suspect the inlet valve. Where is this located so i can check it.Thanks
For model number KSRB25QGSS01
PartSelect logo
Hi John, Thank you for the question. The valve is located on the back of the appliance where the water supply hooks up to the appliance. Good luck with the repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Richard
April 26, 2018
My ice maker flooded the freezer. So much water it ran about a gallon of water in the floor before I got the main water supply shut off
For model number KSRS25QDWH01
PartSelect logo
Hi Richard, Thank you for the question. This sounds like the water valve may have become stuck open and allowed water to flow into the icemaker. I suggest checking the valve to see if it is releasing water. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Raymond
April 28, 2018
The water dispenser on our refrigerator had a delay in dispensing water several years ago. I took apart the valve and it started working again. The ice maker has since quit filling. I took apart the valve again and the ice maker started working but the water dispenser delay is back and is getting worse. There is an electrical hum for several seconds, then it eventually dispenses water. I 95% suspect an inlet valve replacement would fix, but would appreciate a confirmation or other ideas. Thank you.
For model number KSRS25QGBL01
PartSelect logo
HI Raymond, Thank you for the question. Yes, I suggest replacing the water valve assembly.Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
William
April 25, 2022
Neither water dispenser or ice maker work. When I press in on the paddle the light comes on, but nothing happens, no sound either. The inlet valve assembly leaks and I am going to change that, but I wouldn't think would keep the ice maker from turning the spiral inside. The freezer light turns off and on when the door is opened and close, so I think that switch is okay. Any thoughts?
For model number ksrs25qgwh02
PartSelect logo
Hello William, Thank you for your inquiry. We would also recommend checking the dispenser micro switch, the auger motor, and the solenoid assembly. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Joseph
October 8, 2017
We are replacing the water inlet valve and does this come with compression fitting or push lock fitting for the refrigerator hoses. (ice maker and water) part #w10853654
For model number ED2CHQXTQ00
PartSelect logo
Hi Joseph, Thank you for your inquiry. Your water inlet valve has push lock fittings. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ed
January 30, 2019
There's no water going into icemaker. I changed the water inlet valve (w10853654) and still no water. What signals the solenoid to open and close the valve?
For model number ED22TQXG00
PartSelect logo
Hello Ed, Thank you for writing. I believe that would be part number PS2341896 Icemaker Control Assembly. You should of course check this part before replacing, however it may be the cause of the problem. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jerry
July 11, 2019
Do you have available old part number 2155062 for sale for our Whirlpool refrigerator model ed22pwxan00?
For model number ED22PWXAN00
PartSelect logo
Hello Jerry, Thank you for the question. Yes, the 2155062 is in stock. It is our PartSelect Number PS11739118. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11731255
Manufacturer Part Number: W10853654
Brand
Model Number
Description
Kenmore
10650022000
Refrigerator
Kenmore
10650022001
Refrigerator
Kenmore
10650022002
Refrigerator
Kenmore
10650022003
Refrigerator
Kenmore
10650022004
Refrigerator
Kenmore
10650027000
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650027002
Refrigerator
Kenmore
10650027003
Refrigerator
Kenmore
10650027004
Refrigerator
Kenmore
10650032000
Refrigerator
Kenmore
10650032001
Refrigerator
Kenmore
10650032002
Refrigerator
Kenmore
10650032003
Refrigerator
Kenmore
10650032004
Refrigerator
Kenmore
10650037000
Refrigerator
Kenmore
10650037001
Refrigerator
Kenmore
10650037002
Refrigerator
Kenmore
10650037003
Refrigerator
Kenmore
10650037004
Refrigerator
Kenmore
10650212010
Refrigerator
Kenmore
10650212011
Refrigerator - REFRIGERATOR
Kenmore
10652012100
Refrigerator
Kenmore
10652012101
Refrigerator
Kenmore
10652012102
Refrigerator
Kenmore
10652012103
Refrigerator
Kenmore
10652012104
Refrigerator
Kenmore
10652014100
Refrigerator
Kenmore
10652014101
Refrigerator
Kenmore
10652014102
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service