Crisper Frame Support
$11.27
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number
PS11738556
Manufacturer Part Number
WP12603701
Manufactured by
Whirlpool
Product Description
Crisper Frame Support Specifications
Support for the crisper or shelf frame.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Amana Refrigerator Crisper Frame Support
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Amana, Maytag, Kenmore, Whirlpool.
Part# WP12603701 replaces these:
AP6005507, 12603701, 8208330
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 9 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
fridge side was not getting cold
first I removed the panels to see if the coils were getting frosty . Then I noticed that the fan was not spinning. I tested voltage to the fan and it was hot. I ordered the new fan put it in placve and, voila!.
Fixed my fride for under 50 bucks
Fixed my fride for under 50 bucks
Other Parts Used:
-
neil from murfreesboro, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
14 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator drawers cracked on rails and clips fell off
Orders drawrers and replacement clips. Easy to
install. Replacements were better made
install. Replacements were better made
Other Parts Used:
-
Leslie from Newburyport, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
crisper drawer center rail broke
Really easy once I figured out which way the rail went in.
I used the repair as an excuse to clean the refrigerator!!
I used the repair as an excuse to clean the refrigerator!!
Other Parts Used:
-
Diane from Glendale, AZ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
5 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper fram and support bar broke
We joined a CSA (community supported agriculture) and we put too much of the veggies in the crisper. It broke the crisper frame and bar. Replacing them took less than 15 minutes. No tools needed.
Other Parts Used:
-
Paul from Niskayuna, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grand child stood on crisper and broke it. Does any one know if a dishwasher front can be changed after it has been purchased,and where you finde it ?
Ordered from P S and very fast service customer service was great. I would recomend P S to anyone that needs parts.
Other Parts Used:
-
Claude J from Orange Park, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper Frame was cracked at the back and piece that deli drawer cover snaps into was broken on right side
Removed crisper drawers, removed glass, removed broken crisper frame, removed deli drawer cover, removed glass and removed deli drawer. Removed left and right pantry end caps and installed new pantry end caps. Re-installed pantry drawer, glass and drawer cover. Assembled new crisper frame with parts from old according to video instructions, installed center rail and installed new crisper frame . Re-installed crisper drawers and glass. The videos were extremely easy to follow.
Other Parts Used:
-
Linda from WEYMOUTH, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts broken or missing
followed instructions and used common sense and the salesman was very helpful and knowledgeable and he contributed a lot of help in finding the right parts that fit
Other Parts Used:
-
Carlton N from VALDOSTA, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper Frame broke at midspan in rear; glass shelf left taking all the load
Replacement is pretty simple using the video provided on PartSelect--might just need a small screwdriver to get the front metal brace exchanged (also in video). Real issue is the frame design; it's bad.
There is no support provided for the rear edge of the shelf at midspan, which causes the frame/center rail to bow and fatigue back there, eventually breaking with constant use of the crisper drawers coupled with shelf load. To remedy this, after replacement I cut a 6 inch length of 1"x1" post, painted it gloss white, and wedged it underneath the new frame right where the center rail attaches in the back (glass shelf below provides the wedge base). There is no interference with the drawers if the wedge is against the back wall, and you really can't see it. Should work to keep the stress off the plastic. Other ways are obviously possible; this is what I had around the house.
There is no support provided for the rear edge of the shelf at midspan, which causes the frame/center rail to bow and fatigue back there, eventually breaking with constant use of the crisper drawers coupled with shelf load. To remedy this, after replacement I cut a 6 inch length of 1"x1" post, painted it gloss white, and wedged it underneath the new frame right where the center rail attaches in the back (glass shelf below provides the wedge base). There is no interference with the drawers if the wedge is against the back wall, and you really can't see it. Should work to keep the stress off the plastic. Other ways are obviously possible; this is what I had around the house.
Other Parts Used:
-
Russ from CHARLOTTE, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My frame was cracked and could not support the weight of a gallon of milk
I slid on the new support, replaced the frame and my fridge was as good as new in 30 seconds
Other Parts Used:
-
John from Hudson, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alissa
August 27, 2019
We need the wall anchor on the left side that supports the crisper. I don’t see this listed
For model number Mfd2560hes
Good Day Alissa. Thank you for your question in regards to your unit (Model Number MFD2560HES). Based on our research the PartSelect Number for the part that is compatible with your unit is PS11738556. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
6 people found this helpful.
Was this helpful?
Thank you for voting!
David
March 3, 2018
The wall mount is broken. I bought the crisper support repair kit. How do you install this?Can't get the wall mount out
For model number MFI2568AES
Hello David, Thank you for your inquiry. If the wall anchor that this mounts to is broken, you will require the a new wall mount part# WP61005050, which comes with instructions. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gabe
July 30, 2019
My crisper shelf support inner clip broke flush at wall how do i get that out to replace complete
For model number KBFA25ERSS01
Hi Gabe, thank you for your question. We have an installation video located underneath the above part information. Here is the direct link: https://youtu.be/Zy2Rio8qg7I. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Margaret
November 13, 2017
How is the middle piece, between the crisper drawers,installed?
For model number AFD2535FES
Hi Margaret, Thank you for the question. First you will need to remove crisper drawers from bottom shelf frame.Next remove glass from the top of the frame. Insert the new center rail into slots on the crisper frame. Replace glass and the drawers. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738556
Manufacturer Part Number: WP12603701
Manufacturer Part Number: WP12603701
Brand
Model Number
Description