Part Location Diagram of WP4388152 Whirlpool Nozzle and Tube Kit
See part 10 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Nozzle and Tube Kit

★★★★★
★★★★★
3 Reviews
$149.37
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11742481
Manufacturer Part Number WP4388152
Manufactured by Whirlpool
Product Description

Nozzle and Tube Kit Specifications

This kit is intended for use with refrigerators that have a water dispenser in the door.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# WP4388152 replaces these:
AP6009324, 1124717, 2150327, 2150328, 2150329, 2155018, 2155019, 2155020, 2155037, 2155056, 2155057, 2157744, 2157746, 2160760, 2160761, 2160762, 2169019, 2180225, 2182193, 4388152 ... Show more , 987050 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.3
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 20 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
water dispenser tube broke
To put the new tube in, I cut the old tube before the Y piece(screw to door part) and taped the new hose to it. I pulled the old tube from the bottom of the door, while gently pushing/feeding the new hose in until the new hose was at the bottom of the door. Connected the new hose(top/bottom) and turned the water back on. All of 7 minutes.
Thanks for the fast service...
Other Parts Used:
Shelf Support Kit
  • Robert from Abingdon, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
56 of 72 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Nozzle was broken
Didn't know if part was replaced from the front or back of door. Removed back/inside first. Good excuse to clean mold found in places not normally seen. The only real problem was getting the face off the dispenser without breaking it. I now know it snaps off from the bottom. To replace one little nozzle you have to replace about 10' of tube. When I pulled the old tube out. I attached fishing line to it and used to fishing line to help feed the new tube through the door.
Other Parts Used:
  • Robert from Tuckerton, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
34 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaked on floor when water dispenser was used.
1. Turn off water supply to refrigerator.
2. Unscrew water nozzle from dispenser.
3. Remove grill on bottom front of refrigerator.
4. Unscrew tubing at the left side of the union.
5. Unclip tubing from the refrigerator frame.
6. Pull tubing out of the dispenser about 6 inches.
7. Cut off nozzle with scissors.
8. Insert 1/4" diameter x 1" long molly bolt about halfway into end of tubing where it was cut.
9. Insert the remainder of the molly bolt into the end of the new tubing.
10. Pull the old tubing through the bottom of the door.
11. When the new tubing is pulled all the way through the door disconnect from the old tubing. Remove molly bolt if it is in the new tubing.
12. Remove the ferrel from the old tubing and use to attach new tubing to the union.
13. Connect the water nozzle to the dispenser.
14. Insert new tubing into the clips on the refrigerator frame.
15. Re-install grill.
16. Turn on water.
Other Parts Used:
  • Dave from Danville, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
28 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
in door water dispenser tube broken off 1.5 inches from end
shut off water supply behind fridge then released trapped water pressure in the line at the dispenser. Locked off dispenser controls (push button switch). Removed nozzle retaining screw and pulled out nozzle approx. 3 in. to cut off tubing at black pipe so as to use the old pipe as a guide/pull (fish) for the new pipe by joining the end of the new nozzle to the cut and of the old pipe with electrical tape.Then pulled the old pipe from bottom of fridge while simultaneously feeding/pushing new pipe from top. I had to remove lower grate on fridge to access the pipe on bottom. Remaining coupling connection on bottom was done by hand to avoid stripping plastic coupling.
Other Parts Used:
  • haig from La Quinta, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench set
23 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic Water Spout Broke Off
Turn off water supply line fridge. Removing front panel is a must to allow acces to spout and water line. Be careful not to crack front panel $90, it snaps in from the botton, slide a stiff putty knife along bottom edge and gently pry outward to remove. Remove 2 screws that hold spout in place, then cut water line right behind spout. The tricky part is fishing water line down through door. You need to splice new line to old with double sided screw or something with threads that will prevent the lines from pulling apart, then pull water line from bottom of door by hinge, very tight when pulling through hinge opening. You will need to remove vented dust cover at botton of doors to acces the water line. The line has a threaded coupling so unscrew and drain water then cut new line to length. There is a small metal insert in old line that needs to be removed and inserted into new line before attaching coupler. I could perform this in half the time now that I have done it once.
Other Parts Used:
  • Michael from Colorado Springs, CO
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
21 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic nozzle that dispenses water broke off
the parts sent included two replacement kits which at first was confusing. I determined that I only needed the one with the black tubing for my Kenmore refrig. Turned off water supply and vacuumed up all the dust bunnys behind refrig. Removed bottom grate on refrig where black tubing attaches at the other end. Released water left in tubing at dispenser. I did not have to remove the front panel. Removed one screw attaching the nozzle to the dispenser. Decoupled tubing at the far end, more water came out here too. Pulled out upper end of tubing a couple of inches and snipped off. Attached tubing to new tubing with thin wire (as others here recommended) and had my husband pull at far end while I pushed slowly at the dispenser end. Once through reattached screw at top and recoupled at the bottom. Mission accomplished!
Other Parts Used:
  • Catherine from Mount Pleasant, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
18 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
nozzle on water dispenser broke off.
First, turn of the water supply. Then remove the snap on grill from the bottom front of the refrigerator. Disconnect the black hose from the white hose and drain the hoses into a suitable recepticle. Then remove the 1/4" screw that holds the nozzle in place. Cut the hose off just behind the nozzle bracket and tape the end of the new hose to the now exposed end of the existing hose. From the bottom of the door you can now gently pull out the old hose while pulling in the new one. Re-attach the new hose to the existing white hose and replace the 1/4' screw to the new nozzle bracket. I reccoment using 1" wide tape and only going around the tubes once. Too much tape and you won't be able to feed it through the small hole at the bottom of the door. Have someone feed the hose from the top as you gently pull from the bottom.
Other Parts Used:
  • Tom from Roseville, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
16 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken water dispenser spout
part arrived within 24 hours.
1. remove plastic front of freezer door water and ice dispenser by looking at bottom edge of plastic for two slots within which to place a stiff scraper blade. very difficult to pop loose and very fragile plastic so take care not to break it. it just pops off two spots on the bottom side and hangs from the top no screws or anything.
2. remove the two screws holding the water dispenser spout in place. oh yeah don't forget to turn the water off.
3. this is a long plastic water tube that runs from the dispenser thru a plastic tube channel set in the solid foam core of the door thru the bottom hinge and connects to the water inlet junction.
a. this replacement must be pulled from the dispenser area thru the door and out the bottom but it will not fit without cutting off the end of the spout. the hole in the hinge that it passes thru at the bottom of the door is to tight to allow anything other than the thickness of the tubing.
b. pull the spout end of the tubing upward after disconnecting at the bottom in front behind the air grill. if it moves freely you are in luck - if it does not move freely then it is taped in place on the back of the dispenser area and now that whole assembly has to be unscrewed from the front of the freezer door in order to remove the tape so that the tubing can be pulled thru.
4. once the tubing pulls easily as short distance in either direction it is time to attach the new tubing to the old tubing and pull it out the bottom of the door. i tried to use tape but it pulled off when i got to the door hinge on the bottom and it would not fit thru the hinge.
a. on my model even one layer of tape would not fit thru the hinge. so i put some bricks under the freezer door to hold it up and removed the bottom hinge off of the tubing that was disconnected only a short distance away.
5. use tape or place a screw with the head removed into both the old tubing and the new tubing so it can be pulled from the bottom moving the new tubing into place.
mine broke off in the middle of this process and i had to remove the freezer door. take it completely apart to expose the conduit the tubing slides thru, then run an electrical fish tape thru the conduit and drag the new tubing thru, not a fun process but doable - just takes a bunch of extra time.
6. once the tubing was out the bottom i could then simply thread it thru the hinge easily and reassemble everything.
Other Parts Used:
  • thomas from corona, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
15 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spout on water dispenser broken
Cut off old nozzle. Tried electricians tape to join the old and new tubing for fishing, but tube with tape on it, wouldn't fit through hole in hinge at bottom of door. Fished nylon twine through new tube then old tube from dispenser end and was able to feed old tube out and new tube in. Fast and easy. Took more time to clean all the dust and dirt I found down under, than to make the repair.
Other Parts Used:
  • JIM from SACRAMENTO, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tube got cut and it leaked
first I turned off the water supply then I removed screw that was holding the nozzle and pulled out the tube then I pried out the face plate by prying from the bottom with a thin screw driver then I unpluged the wire harness so I could access the black tube guide that the white tube was housed in before it was cut I pushed the new white tube down threw the black tube and out the bottom hinge I replaced the nozzle screw plugged the harness back in replaced the face plate went to the bottom and connected the tube to the other half replaced the bottom molding and turned on the water
Other Parts Used:
  • Robert G. from Kalkaska, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

10 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
January 23, 2018
The nozzle on the water dispenser broke on my fridge. I found this part Kenmore nozzle and tube wp4388152 which seems to be the right thing. Can you get just the nozzle separately or does it only come as the full kit?
For model number 59589990
PartSelect logo
Hello Craig, Thank you for your inquiry. It only comes as the full kit. Hope this helps!

20 people found this helpful.

Was this helpful?
Thank you for voting!
Clarence
March 5, 2018
Does this unit have a water filter. If so where is it?
For model number ED22TQXFW00
PartSelect logo
Hello Clarence, thank you for your question. Per your model information this unit does not take a water filter. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Carey
September 16, 2017
Trying to replace water line in freezer door and cant pull it either way. I have taken the bottom hinge off as one video showed and the line free at spout end but it seems stuck
For model number KSRS27QAWH05
PartSelect logo
Hello Carey, thank you for contacting us. We have a how to video that can help with the install. Just follow the link below, hope this helps! https://www.youtube.com/watch?v=lnEV4ZHC_W4&t=

3 people found this helpful.

Was this helpful?
Thank you for voting!
Irving
May 9, 2019
The water dispenser nozzle broke off. Can you supply a new nozzle?
For model number KSRS25IHBT00
PartSelect logo
Hi Irving, Thank you for your question. The nozzle and tube kit you have referenced in your question to us would be the correct part for your refrigerator. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Frank
June 26, 2019
We have a 1992 Roper fridge and the water dispenser doesn't shut off all of the time. How hard is this to fix and how much are the repair parts?
For model number RS25AWXZW00
PartSelect logo
Hello Frank, thank you for inquiring. For this symptom you will want to consider either the Nozzle and Tube Kit part PS11742481, the Dual Outlet Valve Kit part PS358630, or the Ice Maker Water Fill Tube Kit part PS11739222 for your model. Most of our customers perform these repairs themselves. There is a link to installation videos for each one of those parts located under the photos in the part description, and the prices are listed to the left of the 'Add to Cart' button. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Frank
June 28, 2019
How hard is it to just shut off the water side of the dispenser?
For model number RS25AWXZW00
PartSelect logo
Hello Frank, Thank you for the question. Only way to turn off the water for the dispenser is to turn off the water supply to the appliance. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dan
July 19, 2021
My nozzle broke. Can I just replace the nozzle or do I have to replace the whole tube assembly?
For model number 10659562990
PartSelect logo
Hello Dan, Thank you for the question. The Nozzle is only sold as part of the Tube Kit, We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Eddie
October 28, 2017
Front water dispenser continually drips water, how do i fix?
For model number ed25pex
PartSelect logo
Hi Eddie, Thank you for your inquiry. If the dispenser is dripping water then the water line may be leaking and you will need to check it. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Stan
September 16, 2017
Does this have a water filter and if it does where is it. It is not in the front grill or behind it.
For model number 10657562790
PartSelect logo
Hello Stan. Thank you for contacting us. The manufacturer does not have a water filter listed for this model. Good luck with the repair!

Was this helpful?
Thank you for voting!
Cindy
October 14, 2022
Does the nozzle and black tub come separate from the kit? Or just the white plastic nozzle on the end?
For model number 10650593003
PartSelect logo
Hi Cindy, Thank you for your question. The nozzle and tubes are sold together. If you need help placing an order for the kit, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742481
Manufacturer Part Number: WP4388152
Brand
Model Number
Description
Kenmore
10650022000
Refrigerator
Kenmore
10650022001
Refrigerator
Kenmore
10650027000
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650032000
Refrigerator
Kenmore
10650032001
Refrigerator
Kenmore
10650037000
Refrigerator
Kenmore
10650037001
Refrigerator
Kenmore
10650202990
Refrigerator
Kenmore
10650202991
Refrigerator
Kenmore
10650202992
Refrigerator
Kenmore
10650202993
Refrigerator
Kenmore
10650203990
Refrigerator
Kenmore
10650203991
Refrigerator
Kenmore
10650203992
Refrigerator
Kenmore
10650203993
Refrigerator
Kenmore
10650204990
Refrigerator
Kenmore
10650204991
Refrigerator
Kenmore
10650204992
Refrigerator
Kenmore
10650204993
Refrigerator
Kenmore
10650209990
Refrigerator
Kenmore
10650209991
Refrigerator
Kenmore
10650209992
Refrigerator
Kenmore
10650209993
Refrigerator
Kenmore
10650262990
Refrigerator
Kenmore
10650262991
Refrigerator
Kenmore
10650264990
Refrigerator
Kenmore
10650264991
Refrigerator
Kenmore
10650267990
Refrigerator
Kenmore
10650267991
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service