Product Description
Interlock Support Specifications
Also known as a switch holder.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door not closing properly | Won’t turn on
This part works with the following products:
Microwave, Microwave Oven Combo.
This part works with the following products:
Whirlpool, Maytag, Amana, KitchenAid.
Part# WPW10156813 replaces these:
AP6015897, 8206353, W10156813, WPW10156813VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Gail W - October 25, 2018
Verified Purchase
microwave
everthing good, works fine now.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
Other Parts Used:
-
Mark from HOMER GLEN, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
118 of 141 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top support for door switch broke.
Part of the support was missing. I had to remove the two switches and put them in the new bracket
Had the switches reversed and started blowing fuses. Reversed them and changed the fuse and it started working.
Had the switches reversed and started blowing fuses. Reversed them and changed the fuse and it started working.
Other Parts Used:
-
William from Hudson, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shirley
April 18, 2018
Interlock: It says to see 12a on the diagram. There is no 12a. It only shows 12.
For model number MH53520CS-2W
Hi Shirley, Thank you for the question. Very sorry for the confusion. Item #12 on the diagram is the top #12 on the diagram and #12A on the parts list is the bottom #12 on the diagram. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
November 15, 2017
When i close the door and try to start it it says door i thing the bottom latch is not catching so what do i need to replace?
For model number WMH31017AS0
Hi Ron,
Thank you for your question. I would suggest testing your micro switches with a multi meter to see which one of them you will need to replace. They should all show 0 ohms if they are working correctly. If they do not then you will need to replace that switch. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Shirley
April 18, 2018
It appears that the top support interlock and the bottom interlock support are priced out differently. What is the difference between the two supports that would make them price out differently? Thank you.
For model number WMH53520CS2
Hi Shirley, Thank you for the question. We base the prices for the parts on the manufacture prices and discount down from there. Whirlpool does not state a reason for the price difference. Hope this helps!
Was this helpful?
Thank you for voting!
Barb
March 26, 2019
My door won't close properly so microwave won't run. If you close it, the light stays on and it acts like it is running.
For model number Whirlpool WMH1162XVS1
Hello Barb, thank you for contacting us. For this symptom, there are a few parts that may provide a fix. You may want to try replacing the Top Interlock Support part PS11745301, the Interlock part PS11749178, or the Interlock Spring part PS1964350. We hope this helps.
Was this helpful?
Thank you for voting!
Jim
February 6, 2020
Won’t turn on but if open/shut door and push clear many times it will work again. Is this the part I need?
For model number MMV5220FZ2
Hello Jim, Thank you for the question. We suggest testing the Door Switches first to check for continuity with a multi meter. If the switches are good, you may have a defective Control Board. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Greg
February 13, 2023
micro doesn’t run unless we hold up door
For model number FGMV174KFC
Hi Greg, thank you for reaching out. According to our research, the issue is most likely with the following parts: door latch, part number PS979580, and door stop, part number PS2343169. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Richard
March 11, 2023
Sometimes when you open the door the light does not come on so when you close the door it won't start.
And sometimes if you wait long enough with the door open the light comes on and then you can use it.
Thanks Rick
For model number KMHS120EBS-2
Hi Richard, thank you for reaching out. According to our research, you may need to check the door interlock switch, part number PS2361111, to fix this issue. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Kathleen
May 6, 2023
We put the new parts into our microwave to fix it not working, the interlock support and cam plate were bad. It is working now, sort of. It will come on now but sounds like something is rubbing. Has anyone else had this trouble and what do we look for?
For model number MMV4205DS-2
Hello Kathleen, thank you for the question. According to our research, the issue is probably due to the turntable motor, part number PS11729872. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
John
May 8, 2023
what is part number for interlock support?
For model number wmh76719ce-2
Hi John, Thank you for writing. The Top Interlock Support is PartSelect Number PS11745301 and the Bottom is PartSelect Number PS11749178. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749178
Manufacturer Part Number: WPW10156813
Manufacturer Part Number: WPW10156813
Brand
Model Number
Description