Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Whirlpool, Jenn-Air, KitchenAid.
Part# WPW10190981 replaces these:
AP6016630, W10122533, W10190981
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Clara Rawls
November 9, 2019
The part that moves the ice down to dispense door has rusted as the finish wore off. Other than that it works fine what part will replace this
For model number KFIS24XVWH1 ice maker
Hello Clara, thank you for your question. The ice bucket and auger is what holds the ice and pushes ice down into the door. If the part you need is in the door itself, and is the chute that allows ice to come down from the door that part number is WP13005703B. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
January 22, 2020
Hpw to install part no. Wpw10190981 ice maker
For model number gi5svaxvq01
Hi Doug, Thank you for your inquiry. Open both refridgerator doors, depress the release button on the side of the ice bin and pull it out. Insert a small flat head screwdriver into the side cover access hole and press down to release the locking lever, then pull the side cover forward to remove. Use the screwdriver to press the retaining tab to release the ice maker assembly and pull it forward. Disconnect the wire harness and remove the entire assembly. Use a large flat head screw driver to pry the cover off, and use a 1/4 inch socket or nut driver to remove the bolt securing the sensor wire bracket at the front and detach the bracket. Disconnect the wire harness and remove the bolts securing the ice maker to the baffle on the bottom. Pull the ice maker out and remove the thermal fuse. Although we do not have an exact video for this part, we have included a link to a video for a similar part to assist you. Good luck with your repair. https://www.youtube.com/watch?v=hmCE3oKpEk0
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom Roush
January 23, 2020
How do i get the old part out?
For model number PS11749922
Hello Tom, thank you for your question. Open both refrigerator doors, depress the release button on the side of the ice bin and pull it out. Insert a small flat head screwdriver into the side cover access hole (cover at the bottom left under the icemaker) and press down slightly to release the locking lever, then pull the side cover forward to remove. Use the screwdriver to press the retaining tab on the left side of the icemaker to release the ice maker assembly and pull it forward about half way. With the wire harness disconnected, the icemaker should slide right out. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Raelynn3
December 9, 2017
I have ordered part number w10190981 for my ice-maker. I can't figure out how to get the part out
For model number MF12269VEM
Hello Raelynn, Thank you for your inquiry. Open both refridgerator doors, depress the release button on the side of the ice bin and pull it out. Insert a small flat head screwdriver into the side cover access hole and press down to release the locking lever, then pull the side cover forward to remove. Use the screwdriver to press the retaining tab to release the ice maker assembly and pull it forward. Disconnect the wire harness and remove the entire assembly. Use a large flat head screw driver to pry the cover off, and use a 1/4 inch socket or nut driver to remove the bolt securing the sensor wire bracket at the front and detach the bracket. Disconnect the wire harness and remove the bolts securing the ice maker to the baffle on the bottom. Pull the ice maker out and remove the thermal fuse. Although we do not have an exact video for this part, I have included a link to a video for a similar part to assist you. Hope this helps!
https://www.youtube.com/watch?v=hmCE3oKpEk0
1 person found this helpful.
Was this helpful?
Thank you for voting!
Clayton
April 10, 2018
Does this kit include the water valve?
Hello Clayton, thank you for your question. No, unfortunately, this kit does not come with the water valve. In order for us to locate the correct parts and repair information we will require the model number of the appliance. If you'd like to have the part number for the valve, or any other part please located the model number and resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
December 7, 2023
original part # W10190981 / replaced w/ Pt.# PS11749922 will this INCLUDE On/Off switch or at least 3 wires to switch, heater coil, curved coil feed plug in with yellow wire, module at front ?
For model number G155SVAXVL01
Hi John,
Thank you for your question. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker. The on/off switch that is attached to the cover can be used for the new ice maker. If you need a new on/off switch, the part number for it is PS11740324. We hope this helps!
Hello Fred, Thank you for the question. Here is a link to a How To Video that may help. Thank you for your inquiry, good luck with this repair!
https://www.youtube.com/watch?v=hmCE3oKpEk0&t=21s
Was this helpful?
Thank you for voting!
Clara
July 28, 2021
Have replaced assembly. But ice is not moving toward door. It will freeze next to back.
For model number G15FVAXVLO1
Hi Clara,
Thank you for your question. If your icemaker is not dispensing ice, there are some parts that you will need to check to see which one is causing the issue. You will need to check the ice maker motor, the cycling thermostat, the auger and the auger motor. We hope this helps! Good luck with the repair!
The ice maker isn’t making ice, and the drawers in the refrigerator half of the unit are freezing food. Will this part fix this problem?
For model number MFI2067AEB4
Hello Courtnay, Thank you for the question. The Icemaker would not effect the Drawers. We suggest testing the Thermistor. The resistance of the thermistor in the unit should be 2.7K ohms at 77 degrees. We hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749922
Manufacturer Part Number: WPW10190981
