This part ensures that your door stays locked while the machine is running.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Lid or door won’t close | Locking Issues
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, Inglis.
Part# WPW10253483 replaces these:
AP6017910, 8540222, 8540772, W10253483
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
4.6
Filter By Rating:
5 Stars
7
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gordon P - October 13, 2023
Verified Purchase
Washer Repair
Delivery was quick and resolved my issue
★★★★★
★★★★★
Robert D - June 8, 2023
Verified Purchase
Easy Repair
The Part was correct and the install went exactly as described in some online videos and took not time at all.
★★★★★
★★★★★
Brett R - February 26, 2023
Verified Purchase
Part worked flawlessly
Got the part relatively quickly (came from 3 provinces over). And the part went into the machine perfectly; job took 10 minutes. It was the instructional video though that I found super helpful.
★★★★★
★★★★★
Milan K - September 12, 2022
Verified Purchase
Correct part, fast delivery
Part was exactly what was needed and worked well. Simple instructions helped with install. Machine is back up and running!
★★★★★
★★★★★
Darren J - July 25, 2021
Verified Purchase
Easy repair
Working again
★★★★★
★★★★★
Elizabeth J B - June 17, 2021
Verified Purchase
Great Service
Part was exactly as described. Prompt delivery within 3 days. Very satisfied.
★★★★★
★★★★★
Curtis E - April 10, 2019
Verified Purchase
Gold door latch
Expensive!!
★★★★★
★★★★★
Allan B - January 16, 2019
Verified Purchase
Excellent experience All Around!
Part arrived basically overnight and was an exact match to the OEM; Latch works well and was the solution to the problem. , and the best part of all... the tip on how to install it! Thanks!
★★★★★
★★★★★
Joyce B - November 10, 2018
Verified Purchase
So far so good
It arrived faster than expected and installed by hubby with no problems. Thanks
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door latch module was defective
This model is a front-loading washer. The spring loaded retainer for the front of the boot must be removed, then the boot can moved to the side exposing the module. Remove the two screws holding the model, pull the model out, remove the three electrical plugs, then reverse this procedure to install new module.
Other Parts Used:
Carlton from Greer, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
97 of 116 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the latch broke on my front loading washer.
My son did the repair.So I just know he got it working.Also the part I order came the next day after I called.And if I ever need another part for any of my other appliance I will be sure to call you.And I have told other people I know about you Thanks alot.Deborah Gaffney
Other Parts Used:
Deborah S from Connellsville, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
34 of 49 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barb
September 5, 2019
Washer starts and fills but once it starts to spin it blinks a red light (door lock) and stops running. Can get it to open and sometimes it'll finish the load but the problem seems to be getting worse. It doesn't seem to matter what size of load we put it.
For model number WFW9750WW001
Hello Barb, Thank you for the question. This sounds like the Door Lock is defective and needs to be replaced. Hope this helps!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
September 14, 2017
The washer stopped in the middle of a cycle and wouldn't unlock. Finally unlocked, now the washer won't start. Makes noises as if it is trying to lock but light doesn't come on like it used to. I put it in diagnostic mode, but it didn't seem to move past testing the lock mechanism (kept flashing on rinse/spin). No error codes displayed. Is the latch on the door supposed to move around a little or should it be very tight? Thank you!!!!!!
For model number wfw8410sw03
Hi Chris,
Thank you for your inquiry. There are a few parts you will need to check to see which one is causing the issue. You will need to check the door lock latch, the temperature sensor, the drain pump, the door strike, the drive belt and the dispenser actuator switch. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
February 28, 2020
How do i test this door lock assembly to make sure it’s what is causing my problems?
For model number WFW9151YWOO
Hello Dave, thank you for inquiring. You can test the resistance of the Door Lock Latch with a multimeter. The wax motor in the Door Lock Latch should test as around 1500-1750 ohms to be working properly.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Mackenzie
February 18, 2020
Hello, we have already bought the latch to replace our old one on our Kenmore 110.47571601 but the #20 torx screw with built in washer for the latch is stripped and cannot be reused. Do you sell this screw?
For model number 110.47571601
Hello Mackenzie, thank you for your question. The screw that holds the latch for this unit is PartSelect Number PS11746286. I hope this helps.
When i close washer door it beeps twice but won't start. After slamming door a few times, it may start. Is this a cause of the door latch not functioning properly?
For model number WFW8300SW00
Hello Luz, thank you for inquiring. Yes, this may be due to a faulty Door Lock Latch, this part number PS11751211 for your model washer. You can test the resistance of the Door Lock Latch with a multimeter. The wax motor in the Door Lock Latch should test as around 1500-1750 ohms to be working properly. You may also want to consider the Temperature Sensor, part number PS11755214 as the cause. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
September 23, 2021
Washer has power, fills with water but, has no spin. The belt is good.
For model number MHWE251YG00
Hi Gary,
Thank you for your question. If your washer will fill with water but not spin, there are some parts that you will need to check to see which one is causing the issue. You will need to check the pump, the door lock latch and the belt. You will find the information on how to test these parts under Free Repair Help and Instant Repairman on our website. We hope this helps! Good luck with the repair!
This part doesn’t look the same as the one in my washer. I’ve replaced the motor control and only get 3 beeps. I would like to test this which tabs are the wax motor. The DC , AC or the ones marked 1 2 3 at the top.
For model number 110.47081600
Hello Kevin, thank you for your question. Did you see the Latch PS11745083?. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hi, for part # WPW10253483 washer door lock switch, there are 3 terminals I believe for 2 coils and one for common, what is the resistance value of these terminals for me to tell that I had a defective switch? Reading I had for left and right terminal @2k ohms: .119 ohms; Left to middle: .058 ohms: middle to right terminal: .062 ohms.
For model number Maytag MHWZ600TE00
Hi Henry,
Thank you for your question. You can test the resistance of the Door Lock Latch with a multimeter. The wax motor in the Door Lock Latch should test as around 1500-1750 ohms to be working properly. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
BRAD
July 12, 2023
My machine runs normally but will not start the final spin leaving the clothes very wet. I have checked the drain pump and hoses and all are free and clear. The machine gives me the code F0 E1. I cannot find this code in the failure error codes that came with the machine. Could it be a problem with the door not locking. It makes a noise when started that sounds like it is locking.
For model number YMHWE201YW00
Hi Brad, thank you for contacting us. We have researched the model and would suggest making sure you are not running the clean washer cycle when the clothes are in the drum. Unplug the washer for 5 minutes and then plug it back on. If the error still appears, the issue might be with the control board, part number PS11753744. It processes the cycle settings you choose. We hope this helps!
Hello William, thank you for the question. It appears that your washer may have a damaged door lock, part number PS11751211. We recommend checking it to get to the root of the problem. Good luck with this repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751211
Manufacturer Part Number: WPW10253483
