Part Location Diagram of WPW10467289 Whirlpool Temperature Sensor
See part 26 in the diagram
Replacing your Whirlpool Washer Temperature Sensor
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Temperature Sensor

 Fits your WFW9050XW00!
★★★★★
★★★★★
5 Reviews
$47.46
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WFW9050XW00!
PartSelect Number PS11755214
Manufacturer Part Number WPW10467289
Manufactured by Whirlpool
Product Description

Temperature Sensor Specifications

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Washer Temperature Sensor

Replacing your Whirlpool Washer Temperature Sensor

Replacing your Whirlpool Washer Temperature Sensor

Replacing your Whirlpool Washer Temperature Sensor
Troubleshooting
This part fixes the following symptoms:
Will Not Start | No hot or cold water | Will not drain
This part works with the following products:
Washer, Washer Dryer Combo, Dryer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, KitchenAid.
Part# WPW10467289 replaces these:
AP6021886, 8181705, 8182291, 8540225, 8540226, W10176658, W10176659, W10467289
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.2
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    4
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 2 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Washer posting a f6 error
This was an easy fix . PartSelect was quick and had all the info I needed to repair my washer. Plus shipping was super fast. Thanks
Other Parts Used:
  • Robert from Salt Lick, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
37 of 111 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing the heat sensor following an F-24 Error Notice.
I followed your repair video explicitly, simple fix. However, one should
be careful when disconnecting the two prong electrical connector from
the heat sensor. the two black wires can pull free easily. In that case, the
rear of the female plastic wired connector must be extracted to allow the two black wires to be "pushed" into the narrow slot which displaces the
wire insulation and allows for a good electrical connection. If a punch tool is not available a pair of needle nose pliers works. Also, observe
the orientation slots on both the male andfemale connectors - they
connect one way only! I set the washer on it's face while effecting this
repair to better see what I was doing (eyesight not as good as it used to be). Thanks for the timely support!
Other Parts Used:
  • william from VIRGINIA BCH, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

31 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bryan
November 10, 2017
Can you tell me what the approximate resistance should be in the temperature sensor. My washer turns on, the control panel lights up, the door locks and the timer starts counting down but no water ever starts running. Washer is almost 7 years old.
For model number WFW9451XW00
PartSelect logo
Hi Bryan, Thank you for your question. This part should read around 11 ohms of resistance when testing. I hope this helps. Good luck with your repair.

8 people found this helpful.

Was this helpful?
Thank you for voting!
Barry
November 19, 2017
The washer starts to fill but then shows the code f 24. What do I need to do to fix it or do I need to replace the sensor?
For model number WFW9550WW00
PartSelect logo
Hi Barry, Thank you for the question.The "F24" error indicates that there is something wrong with water temperature. If the temperature of the water is fine the Sensor,PartSelect Number: PS11755214 will need to be replaced. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Roselyn
August 8, 2018
I'm getting an F05 error code on my Whirlpool duet washer. Which of these parts if any do i need?
For model number GHW9150PW
PartSelect logo
Hi Roselyn, Thank you for your question. The F05 error code means that you are having a temperature sensor error. You would have to check the Water Temperature Sensor, and Heating Element to see which one is malfunctioning. I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Rick
June 10, 2019
Hello. Whirlpool washer wfw97hedw0 after pressing power turns back off between 2 4 seconds no noises Regardless if moving control knob it will still turn off with in 2 4 seconds No door lock trigger like normal Pressing go button make it shut off faster Thank you for any input
For model number wfw97hedw0
PartSelect logo
Hello Rick, thank you for your question. There are a few parts that coudl be causing that issue. We would recommend testing the Temperature Sensor Part Number: WPW10467289, Flowmeter Part Number: WPW10110225, Dispenser Actuator Switch, Part Number: WPW10352973, Noise Filter - 275V and 50/60Hz, Part Number: WPW10367632, LOCK, DOOR Part Number: WPW10443885. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Peter
September 25, 2019
Machine won't start/fill. Error code e-02 f8 shows.
For model number MHW6000XW2
PartSelect logo
Hello Peter, Thank you for the question. F8 E2 Code indicates there is a problem with the Dispenser System. Verify detergent drawer or detergent cartridge is not clogged with detergent. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
August 10, 2021
With cold/cold selected on the machine, it starts and begins to fill with water. However, it never gets to the washing cycle before error code 'f 05" starts flashing. The machine then drains and stops. When the door is opened, the water is hot. Any help would be appreciated.
For model number GHW9400PL4
PartSelect logo
Hello Jim, Thank you for the question. The F05 Error Code indicates a defective Water Temperature Sensor, PartSelect Number PS11755214. This part should read around 11 ohms of resistance when testing. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Doug
January 22, 2018
I push the power button and all it dose is beep three time and dose not turn on?
For model number MHWE300VW12
PartSelect logo
Hi Doug, Thank you for your question. It sounds like you may have locked your control panel. I could suggest pressing and holding the stop/cancel button for about 30 - 60 seconds to see if that unlocks your panel. You could also try unplugging the power from the machine for about 5 minutes and then plugging it back in. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Pedro
March 4, 2018
How i can test if the drain pump is no damage
For model number MHWE450WW01
PartSelect logo
Hello Pedro, thank you for your question. To test the temperature sensor you will want to remove the part and test with a multilmeter. This part should read around 11 ohms of resistance when testing. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Brian
January 1, 2018
My Maytag washer lights up, and the door locks but there is no water and the tub does not turn. Can you help?
For model number MHWE400WW01
PartSelect logo
Hello Brian, Thanks for your question. We would advise testing the door lock/latch switch assembly with a multi-meter to test the part for continuity, and replacing it if it shows no continuity. The drive motor may also be worth checking to see if it is getting power properly. I hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
Laurao
September 11, 2017
I need help with the temperature sensor location on a Whirlpool duet sport ht
For model number wfw8400tw02
PartSelect logo
Hi Laurao , Thank you for the question. The sensor is located in the heating element. Hope this helps!

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11755214
Manufacturer Part Number: WPW10467289
Brand
Model Number
Description
Kenmore
1102647751K
Washer - Kenmore Washing Machine 1102647751k
Kenmore
11041932510
Washer - COMMERCIAL WASHER
Kenmore
11041942710
Washer - WASHER
Kenmore
11041952710
Washer - Kenmore Washing Machine 11041952710
Kenmore
11042822200
Washer
Kenmore
11042822201
Washer
Kenmore
11042822202
Washer
Kenmore
11042822203
Washer
Kenmore
11042824200
Washer
Kenmore
11042824201
Washer
Kenmore
11042824202
Washer
Kenmore
11042824203
Washer
Kenmore
11042826201
Washer
Kenmore
11042832201
Washer - Kenmore Washing Machine
Kenmore
11042834201
Washer
Kenmore
11042836201
Washer
Kenmore
11042922200
Washer
Kenmore
11042922201
Washer
Kenmore
11042922202
Washer
Kenmore
11042922203
Washer
Kenmore
11042924200
Washer - Kenmore Washing Machine
Kenmore
11042924201
Washer
Kenmore
11042924202
Washer
Kenmore
11042924203
Washer
Kenmore
11042926200
Washer
Kenmore
11042926201
Washer
Kenmore
11042926202
Washer
Kenmore
11042926203
Washer
Kenmore
11042926220
Washer - WASHER
Kenmore
11042932200
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service