Product Description
Kickplate Grille - Apollo Gray Specifications
This kickplate grille is attached to the bottom of the refrigerator.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Kenmore.
Part# WPW10534155 replaces these:
AP6022716, 12880103AP, W10120000, W10191107, W10244558, W10244558N, W10534155, W10534155N
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Craig N - August 7, 2022
Verified Purchase
Broken. First shipment
The first shipment came broken. The box was bent and the part was broken in half. Called and had to reorder at my expense and then wait for the “warehouse to determine” and issue a credit. I was told to hold the part as the “warehouse” might want it returned. I AM STILL HOLDING THE PART AS NO ONE HAS FOLLOWED UP TO TELL ME TO RETURN IT OR DISCARD IT. So maybe someone would be so kind as to check with the “warehouse”. I would like to get rid of it. Thanks
October 1, 2022
Hi Craig,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
SUSAN D - March 3, 2022
Verified Purchase
Works as expected.
The part fits properly. I just think it shouldn't be as expensive.
Aftab C - March 2, 2022
Verified Purchase
Easy repair once you know how to put it on
The part is great, but you need to know how to fix it. Open the freezer drawer first and then try and fix it. Ideally, use two people to fix it; one on either side. The clips can be a bit stiff to get into the metal grill at the back so you'll need to give it some hard smacks on both sides.
Colin S - March 5, 2020
Verified Purchase
Easy Peasey
The part arrived very quickly, in perfect condition and snapped into place as expected. Perfect colour also.
Chris S - February 13, 2020
Verified Purchase
As described
As described. Thanks
BARBIE T - January 24, 2020
Verified Purchase
All good!
Part received - it fits - no further issues!
Tenika S - December 30, 2019
Verified Purchase
Would have been easy
The part came within a reasonable time. Just shy of a week to arrive here in Brampton. However, I did not receive the hardware which made this repair prolonged. I have to call bacj to order the part.
Danny L - May 20, 2019
Verified Purchase
Worked perfectly
Came delivered well packaged and in timely matter, great service.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
no symptoms (previousely damaged product)
Easy repair here, the Refridge was purchased at a discount as a scratch and dent model. the damage was superfical and the parts orderd were simple remove and replace job did not take long at all to replace all parts.
Divider pantry: no tools required, simply pull out tray and remove old broken dividers and snap new divider in place.
Brace-Crisper: this takes a screw driver to remove. remove the crisper shelf and insert a screw driver to lift the plastic securing tab. slide out the frame brace and slide the new brace in place the plastic tabs will snap in to place and hold the metal frame in its position.
Grille, Toe: this grill snaps into place no tools required.
Bracket: this is the metal bracket for the front feet, there are 4 screws to remove and the bracket comes off the front of the refridge. unsrew the adjustable screw foot and screw the adjustable screw foot into the new bracket......install the 4 screws and you are done.
Trim-Shelf: no tools required simply pry the trim piece of with your fingers.....some may use a flat screw driver but this riskes scratching the trim piece. the new trim piece snaps into place.
Divider pantry: no tools required, simply pull out tray and remove old broken dividers and snap new divider in place.
Brace-Crisper: this takes a screw driver to remove. remove the crisper shelf and insert a screw driver to lift the plastic securing tab. slide out the frame brace and slide the new brace in place the plastic tabs will snap in to place and hold the metal frame in its position.
Grille, Toe: this grill snaps into place no tools required.
Bracket: this is the metal bracket for the front feet, there are 4 screws to remove and the bracket comes off the front of the refridge. unsrew the adjustable screw foot and screw the adjustable screw foot into the new bracket......install the 4 screws and you are done.
Trim-Shelf: no tools required simply pry the trim piece of with your fingers.....some may use a flat screw driver but this riskes scratching the trim piece. the new trim piece snaps into place.
Other Parts Used:
-
blane from upper arlington, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
26 of 56 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bought used fridge with missing parts
Drip tray installed by hand without a hitch. Tilt, insert drop down....Meat refrigerator storage, simply install by hand, lift lip over back of drawer and drop into the indented areas to lock-in. Kickplate required some time and I had to improvise the sheet metal screws which were NOT included. Some refrigerators require a snap in procedure, this requires two sheet metal screws. Fortunately, I'm an old tool and die maker, and I save ALL old bolts, screws, nuts, washers for just such a situation. Did it and DONE!
Other Parts Used:
-
Mark from BRIGHTON, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
November 24, 2017
The bottom grill does not grip but it looks just like the picture. Why doesn't it grip?
For model number KFCS22EVMS4
Hi Joan,
Thank you for your question. You should be able to just push this part back into place. Have you made sure that any broken pieces from your previous kickplate have been removed from the areas where your new one will need to clip into? I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joyce
June 19, 2019
Wpw10534155---need length of part.
Hello Joyce, thank you for writing. This Kickplate Grille is approximately 37" x 2" x 4". If you can provide the model number for the unit you want to use it on, we can see if it is compatible or which one is.
Was this helpful?
Thank you for voting!
Darrell
July 30, 2019
Need kick plate for above model refridgerator
For model number GI6SDRXXy05
Hello Darrell, thank you for inquiring. This Kickplate Grille part number PS11756053 is the replacement you are looking for on your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
Gill
October 18, 2023
I need a new kick plate for our fridge. Could you advise what o need to order? (original kick plate was broken and we did not get replaced when we purchased the fridge).
For model number KBSD612ESS00
Hello Gill, thank you for reaching out. The toe kick plate for your model is part number PS11749873. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11756053
Manufacturer Part Number: WPW10534155
Manufacturer Part Number: WPW10534155
Brand
Model Number
Description