Product Description
Door Gasket - Gray Specifications
This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door Sweating | Door won’t open or close | Fridge too cold | Fridge too warm
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# W10830162 replaces these:
AP6027233, 12723206AP, W10179332, W10179332N, W10199876, W10443225, W10571956
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Natalie S - August 18, 2024
Verified Purchase
Exceptionally easy repair
Wasn’t sure if I needed 2 identical gaskets for my left and right door so I called in to ask and the Agent was super helpful. She was able to confirm that I needed 2 and also shared a tip to warm up the gasket prior to installing to ensure it was in proper form and that it would fit properly. Overall was a super easy install and in hindsight, we should have done it a lot earlier!
Claude M - July 23, 2024
Verified Purchase
easy install
The wrong part was originally shipped. The customer service team did a great job addressing the issue and provided the correct part in a timely fashion.
Ron S - December 7, 2022
Verified Purchase
Door gasket
Installed easy and fit perfect. Was a bit wrinkled in the shipping box so warmed it up with a hair dryer and let it sit over night before installation
Jason B - May 19, 2020
Verified Purchase
A tisket and tasket a handy rubber gasket
Best Grey rubber fridge gasket I ever bought. Went on smooth. Helpful to watch YouTube videos on installation. Delivery was super quick and price was great.
Robert B - August 28, 2019
Verified Purchase
Worked as expected
The delivery was quick. It was fast & easy to install. The seal does the job well. Would recommend PartSelect to others. Robert
Jean Louis B - June 8, 2019
Verified Purchase
Very easy installation!
The part was a little bit twisted, but was easily put in place. Look good and much more sturdy than the original part. Doing the job very well.
Craig P - November 25, 2018
Verified Purchase
A little wrinkle :)
the part came very fast and easy to install. very hard to get the ripples out of the gasket....soaked in warm water as well as using a hair dryer. still wrinkled. seams to work ok as temp has not changed in the fridge, which is what I was told when I phoned in to inquire on same.
Daniel I - October 10, 2018
Verified Purchase
Great experience and fast deliver
Had water building up on inside of French doors. Old gaskets were worn out and these new ones work great so far. Water is all gone! Also...VERY easy website to navigate and parts shipped fast. Would recommend for sure.
Antonietta C - September 28, 2018
Verified Purchase
Door Gasket
Received the part fast and was very easy to replace.
Wayne Y - September 4, 2018
Verified Purchase
Perfect part
The item arrived much quicker than I expected! The part matched original part perfectly.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 17 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door gasket wasnt sealing anymore and had some minor cracks
First, I removed the old door gasket by pulling it out of the channel it was mounted in, noting the orientation of the gasket. Then, it was a simple matter of lining the new gasket up with the channel and pressing it into the groove. Very easy repair, and the door seals great!
Other Parts Used:
-
Joel from DELRAY BEACH, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
27 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door seals split and condensation forming
Removed the old gasket and made sure we put the new one in the same way. A wooden mixing spoon was the best tool for pushing the gasket into the track without hurting it. We used the back of the spoon and it went right in with no problem.
Other Parts Used:
-
Chet from TOLEDO, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
13 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace gaskets in refrigerator door as they were cracking
Beware - the website does not indicate that doors are different sizes on this model refrigerator. Not paying attention I ordered 2 of the same size gasket which only fit the right side door - had to send one back and reorder left side from Whirpool directly.
The actual installation is very easy. It may take a day or so the gasket to feel like its actually making a good seal.
The actual installation is very easy. It may take a day or so the gasket to feel like its actually making a good seal.
Other Parts Used:
-
John from LONG VALLEY, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
11 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right side door gasket split open
First, selecting the right part is more difficult than the repair. My Kenmore is an outdated model actually manufactured by Whirlpool.
Once I got the part I relaxed the gasket with a hair dryer - an important step suggested by PS. I then took old of the old gasket and removed it. The new one fits in the channel. Just press and make it is completely installed and flush.
Once I got the part I relaxed the gasket with a hair dryer - an important step suggested by PS. I then took old of the old gasket and removed it. The new one fits in the channel. Just press and make it is completely installed and flush.
Other Parts Used:
-
Thomas from SPRINGFIELD, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
9 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door gaskets coming apart
-
Edward from GRAND FORKS, ND
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem
Just pulled the old one off with fingers, and pressed the new one in place.
Other Parts Used:
-
Rodney from LAVEEN, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket has 2 tabs on the side that opens. Both had torn. Also one vertical slit halfway up the gasket
Followed your instructions: gasket came coiled in the box and was slightly curled up. Both left & right side of gasket were linked. Followed your instructions to properly restore the shape. Pulling the old gasket off and installing the new one took just a few minutes
Other Parts Used:
-
William from BRUCE TWP, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door no longer stayed shut
repair was extremely easy.
Whether it was magnets weakened or seal getting stiff with age not allowing it to seal well, these gaskets improved it. Still not as strong a magnetic pull as it could be though. I will also say that the seals didn't pull tight at first. It seems the seals needed to flatten a bit before the magnets did their job.
Whether it was magnets weakened or seal getting stiff with age not allowing it to seal well, these gaskets improved it. Still not as strong a magnetic pull as it could be though. I will also say that the seals didn't pull tight at first. It seems the seals needed to flatten a bit before the magnets did their job.
Other Parts Used:
-
John from BOONSBORO, MD
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
moisture build up on gaskets and doors
After watching a couple of YouTube videos I had an idea of what to expect. It is really easy. Simply pull out the old, clean up the track and press in the new. I used a heat gun to eliminate the wrinkles in the material. A hair dryer would work as well.
Other Parts Used:
-
Robert from WINONA, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rubber seal for right hand doors separated and allowed magnetic strip to fall out
Received gasket. Checked color and size. Because this unit is 33 inches wide one door is 3 inches narrower than the other. Removed shelves from door to provide more room to work. Took 15 seconds to pull out old seal and 1 minute to install the new one. Checked to make sure center sealing flap were on the center side of door. Started in upper corners, worked my way around the perimeter pressing in in with my fingers.
Took longer to R&R and wash shelves than to replace door seal.
VERY EASY
Took longer to R&R and wash shelves than to replace door seal.
VERY EASY
Other Parts Used:
-
Gary from YUMA, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelli
June 13, 2019
Is this for both doors excluding the freezer cabinet or will i have to purchase two of these for my refrigirator
For model number mff2558vem10
Hello Kelli, thank you for your question. This replacement Door Gasket for your model is sold individually. It is the same on both doors.
62 people found this helpful.
Was this helpful?
Thank you for voting!
Julie
February 12, 2020
I need to replace the right door seal for my kitchen aid refrigerator. This looks like part 8b (gray). But the seal on my door has a magnetic strip inside that seals to the left door. I don’t see this in the description. Which part is this? The seal around the door split open and the magnetic strip came out. Thanks!
For model number KRFF305ESS
Hello Julie, Thank you for the question. The Gasket PartSelect Number PS11759515 will fit on both right and left door and includes the Magnetic strip inside the gasket. We hope this helps.
42 people found this helpful.
Was this helpful?
Thank you for voting!
Kenisha
July 4, 2019
Does the door gasket come in pairs?
For model number GX5FHTXVY09
Hi Kenisha, thank you for your question. The door gaskets are sold individually. I hope that helps. Good luck with your repair.
12 people found this helpful.
Was this helpful?
Thank you for voting!
Daryl
January 28, 2020
My fridge is the Kenmore elite and I need to replace both sides door gaskets. Does this item fit both sides?
For model number 59677603804
Hello Daryl, Thank you for the question. Yes, this gasket is used on the left and right side door. We hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Victor
August 4, 2021
Both door gasket
For model number WRF535SMBM00
Hi Victor,
Thank you for your question. The part number listed under your model number for the white door gasket is PS11759516. The part number listed for the black door gasket is PS12723959. The part number listed for the grey door gasket is PS11759515. The gaskets are sold individually. If you would like to place an order for them, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Irene
September 18, 2021
I have stainless dble., door Whirlpool refrigerator. The right side of the door needs a gasket replacement in gray, believe it is magnetic. Please help me find that replacement.
For model number wrf535smbm00
Hello Irene, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PS11759515. Hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Kim
November 8, 2019
Hi! I need to replace both left and right door gaskets on my Whirlpool fridge. They are grey. Can you please help me out with the part #s? I don’t want to screw this up ;). Thanks!
For model number WRF532SNBM01
Hello Kim,
Thank you for your question. The right side gasket for your model is under part PS11759515, and the right side gasket is under part PS11768660 for your model. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Rene
July 15, 2021
Is this compatible with my Jenn-Air fridge? I don't see the little "tabs" that are at the top and bottom corners on the side opposite the hinge. I don't know what the original Jenn-Air part number is (it's not in my manual) so i can't compare it in the "compatible" list.
For model number JFC2089BEM00
Hi Rene,
Thank you for your question. Yes, this would be the correct door gasket for your refrigerator doors.
If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
April 22, 2019
The doors are different sizes how will the same gasket fit both doors? Refrigerator door gaskets on KitchenAid model kbfs22ewms9. My husband measured and they are at least 3 inches different.
For model number KBFS22EWMS9
Hello Carol, thank you for inquiring. For your model there are two different Door Gaskets, the right door is part PS11759515 and the left door is part PS11768660.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
May 2, 2019
Hi, in the door parts section for this model you list item 8 as the only gasket and I have two doors. Is it the same for both doors so I need two of this part number?
For model number GX5FHDXVY07
Hello Dave, thank you for inquiring. This Gray Door Gasket part PS11759515 is the correct replacement for both the left and right door on your model. The Freezer Door Gasket is part PS8688875.
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11759515
Manufacturer Part Number: W10830162
Manufacturer Part Number: W10830162
Brand
Model Number
Description