Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brent S - September 1, 2024
Verified Purchase
Have ice again
Replaced icemaker in kitchenaide fridge. Have ice again!
★★★★★
★★★★★
Bruce M - March 1, 2024
Verified Purchase
My Fridge Fix
I replaced my faulty ice maker and your part was perfect, easy to install and I was back to making Caesars within hours. I had previously ordered new wheels for my dishwasher that were also a perfect fit. You are my 'goto' parts supplier. Thanks.
★★★★★
★★★★★
Paul M - March 1, 2024
Verified Purchase
Perfect fit ! Perfect ice cubes once again
Part was perfect , glad to know where to go for our part needs in future .. finding the right part for the job!
★★★★★
★★★★★
Lorne M - January 27, 2024
Verified Purchase
Not really hard to change it over
Yes. The part came in good condition and was well packed. However, I noted that I had replaced it once before in 2018..Doesn't seem to have a good operational time..
★★★★★
★★★★★
Pascal B - February 4, 2023
Verified Purchase
Great !
Perfect fit, easy replacement. Rapid delivery
★★★★★
★★★★★
Don D - January 5, 2023
Verified Purchase
Perfect fit — working as well as the day we purchased the fridge
Perfect fit — working as well as the day we purchased the fridge
★★★★★
★★★★★
Carlos B - November 27, 2022
Verified Purchase
Easy to replace after watching a video how to remove freezer door and drawer.
Part came fairly quick, easy to install and its working good.
★★★★★
★★★★★
Robert E - October 6, 2022
Verified Purchase
Worked as expected
Yes, the part arrived sooner than expected, and installation was a breeze.
★★★★★
★★★★★
Keith C - October 1, 2022
Verified Purchase
great part replacement, worked as advertised after 10 minutes after install and still pumping out cubes .... Thanks
The part came 2 days after order and was the exact part I required. The part was well packaged and not damaged. Great job. Thank Keith
★★★★★
★★★★★
Grant Schafer C - September 27, 2022
Verified Purchase
Maytag ice maker
The part came fast in perfect condition.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 25 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker did not work in the bottom freezer
Shut down refrigerator at the breaker. Placed freezer items in a cooler. Removed top shelf. You must release roller covers on each side to remove the shelf ( Two front screws must be removed) Took off freezer door. (4 screws holding the door to the bracket) Disconnected ice maker electronic plug. Totally removed bottom screw holding ice maker. Loosen two top screws and remove ice maker. Reverse process to install.
Other Parts Used:
Raymond from NORTH VENICE, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
30 of 38 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker was leaking fresh water into the tray freezing large clumps of cubes together.
First and foremost shut off the water supply to the Ice maker. Some recommend unplugging the refrigerator or disabling the circuit breaker to the refrigerator. Then after emptying the freezer remove the freezer door by loosening the four hex head screws and lift the door straight up and set it off to the side.You can then remove the lower basket. Now locate the clamps located at the rear sides of the inner basket and use a small flat blade screwdriver to gently push the tabs toward the outside of the side clamps while pulling up at the same time and releasing the clamp. Now repeat this procedure on the opposite side of the inner basket. The inner basket can then be pulled out being careful to not damage the roller tracts or gear rollers. Three hexhead screws secure the ice maker to the wall. The screw under the ice maker must be removed while the two on top just loosened. The electrical plug is removed by depressing the tabs on the top and bottom of the plug and then pulling outward. Carefully lift the ice maker upward and out from the two upper hex head screws. You can then install the replacement icemaker by reversing the procedure.
Other Parts Used:
william from GROVE, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
15 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker stopped making ice automatically
Unplug the electric flat plug from wall. Loosen up 3 mount support screws , Change out unit. Mount Int back onto 3 support screws . Plug in electronic flag plug , It only goes in one way since the plug as a grove on it.
Other Parts Used:
Larry from Roosevelt, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Existing icemaker would freeze up, stop making ice.
I did not unplug the refrigerator. Your choice on this. Take a close look at the existing icemaker, how the wires are routed and what the water spout looks like as it relates to the icemaker. Small flat-blade screwdriver will help in unlocking tabs on the icemaker plug. Go ahead and unplug it. Of the three screws that secure the icemaker, two are impossible to see without holding a mirror in your third hand. Completely remove the bottom screw (by feel). Don't drop it, like I did. Have no idea where it went. Loosen the top two screws but do not remove. Icemaker will lift off of the top two screws when you push it up. With old icemaker out of the way, plug in the new icemaker. Be careful to properly align the water spout into the new icemaker as you hook it on the two top screws. When everything looks good, tighten the two top screws. Replace the bottom screw, if you didn't lose it. My icemaker is doing fine without a bottom screw. It should make some ice within an hour, or so. Mine did.
Other Parts Used:
Steve from WAKE FOREST, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
icemaker stopped working
Hardest part is access to the icemaker itself. Once I removed the freezer door (bottom drawer freezer), and got the sliding basket out, it was a 10 minute job. Make sure you start the upper screws first, the icemaker will hang there while you adjust, connect the harness, and tighten. Make sure you are ready before you close the door, it will start making ice as soon as the door is closed.
Other Parts Used:
Charles from CASTLE ROCK, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working
I tested the ice maker first and got no response. So I bought the new ice maker and unplugged the connector in the back, loosened the 2 screws up top and took the bottom screw out. I took out the old one and then plugged the new one in and hung it back on the 2 loosened screws and put the bottom screw in and tightened the screws. I have to say it’s working great! Have plenty of ice again. Saved a lot of money by doing it myself. Buy your original model number part from Parts Select.
Other Parts Used:
BRIAN from DEER PARK, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker replacement
Loosen the top 2 screws, remove the bottom screw, unplug the wire harness, lift up the ice maker and remove. To install the new one simply reverse the removal procedure. Note: You may want to wipe the inside of the new one to remove the protective grease or discard the first 2 cycles of ice.
Other Parts Used:
John from CENTEREACH, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker quit working 2 years old
the shelf in the bottom load freezer compartment can not be removed and therefore impossible to get bottom screw in the holds the ice maker replacement in place the materials used to hold the veggie drawers is not strong enough there is broke and was necessary to put a stick in to support the weight The sticker say American made ---but this product is nothing to be proud of
Other Parts Used:
Don from OCEAN ISL BCH, NC
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
4 of 39 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker quit making ice
removed the freezer door, removed the two shelves and removed three screws from the icemaker, unplugged the wiring harnest. Installed the new icemaker in reverse procedure.
Other Parts Used:
Phillip from JASPER, AL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom freezer ice maker quit making Ice
Used a deep well 1/4" nut driver. Loosen 4 screws on inside of door and slip it up and off rack. Remove 2 screws on bottom of ice maker. Loosen top 2. Slip up of screws, unplug ice maker and remove.
Other Parts Used:
JimBob from CRAWFORDSVLLE, AR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
66 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Henry
October 24, 2017
Is this the whole ice maker
For model number W10469286
Hi Henry,
Thank you for your question. Yes, this is your entire ice maker. Good luck with your repair.
45 people found this helpful.
Was this helpful?
Thank you for voting!
Sandra
January 13, 2018
Is new wiring harness included?
Hello Sandra, Thank you for your inquiry. The wiring harness is not included, you will have to use the harness from the old ice maker. Hope this helps!
19 people found this helpful.
Was this helpful?
Thank you for voting!
JEFF
January 23, 2019
Does ice maker comes with cycling thermostat and can i tell if ice maker is bad or thermostat
For model number MFF2558DEM00
Hello Jeff, thank you for your question. Yes, the icemaker comes with the thermostat. This thermostat controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ice into the bin and start the ice making cycle again. If your ice maker is making unusual noises, or if the ice maker is not making or dispensing ice, there could be an issue with the thermostat. You can test this thermostat with a multimeter to see if it has continuity. If the thermostat does not have continuity you would want to replace the thermostat itself. I hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
George
February 6, 2019
The ice maker does not dispense ice. Will this part resolve this problem?Thank you.
For model number GSF26C5EXY02
Hello George, Thank you for the question. if the ice maker is still making ice then the ice Maker is fine. If the ice is not dispensing, you can try to remove the ice container and let it sit out to thaw any ice build up within the container. If this does not fix the issue you can take the bin apart and check for any damaged parts within the container. You should be able to hear the motor in the container when it is trying to dispense. If the motor is not turning on to dispense, you may have a defective Motor, Part Number: PS11740462. Hope this helps!
I asked this question but it was answered wrong. I stated my refrigerator wont stop making ice, so wondering what to do. The answer i received was regarding an ice maker not working which isn't my issue. The problem is, it keeps making ice, the metal lever doesnt stay up which is supposed to stop it from making ice. Thanks.
For model number kitchenaid fridge krff305ebs
Hi Shari. If the arm won't stay up you can try replacing the shut off arm PS11750229. Thank you for your question and good luck with your repair.
No ice. Water valve functional upon testing with 120v.....water flows......i re started fridge and am waiting for fill valve to energize.....anything i can look for.....would like to test the functions from the front but not sure if i need to......the bar moved when I restarted the equipment.
For model number GX5FHDXVY09 and Serial: K22905993
Hi Ken, thank you for your question. In most cases, if both of the solenoids on your water inlet valve are testing within 500 - 1500 ohms of resistance, then the problem would be with the ice maker not calling up water to start making the ice. Which means that you may have to replace your ice maker itself if the issue is not in your water valve. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
John
January 23, 2019
How do you adjust the ice cube size?
Hello John, Thank you for the question. There is a small plastic screw at the front of the icemaker that would be an adjustment screw and you would simply turn it a 1/4 turn counter clockwise but no more than that. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
James
November 13, 2019
What is the part# for the ice maker for the refrigerator model number above
For model number MFF2558DEH00
Hello James, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11765620. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
James
February 15, 2020
1. My fridge is 5 years old and is located in a vacation home. I shut off the r/o water supply to the appliance but forgot to turn the ice maker off by putting the handle in the off position. When i turned the water supply back on, the ice maker wasn't producing ice. 2. Does this model have an internal filter? I can't see one in any obvious locations.
For model number WRB322DMBW00
Hi James. It has what is called a drier filter linked below. The most common for this is replacing the icemaker assembly. Thank you for your question and good luck with your repair.
Does is this compatible with Whirlpool fridge WRB322DMBB00?
Hello Cindy, thank you for writing. Yes, the part PartSelect Number PS11765620 you had chosen is compatible with your model number WRB322DMBB00. We hope to hear from you soon.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11765620
Manufacturer Part Number: W10884390
