Part Location Diagram of W11050447 Whirlpool TRASH COMPACTOR TOUCHPAD
See part 19 in the diagram
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

TRASH COMPACTOR TOUCHPAD

$133.81
  Special Order
PartSelect Number PS11775327
Manufacturer Part Number W11050447
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Trash Compactor.
This part works with the following products:
Whirlpool.
Part# W11050447 replaces these:
AP6042015, 9872017B
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 2 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
the operating buttom membrance was cracked
1Turn the compactor off
2Removed the plate on the top of the compactor. Mine was held by 2 screws.
Make note of where the electrical connections are located
3Remove the electrical connections on the operating plate.
4Remove 2 screws holding the plate to the compactor
the unit housing the operating buttons is now free from the compactor
using a small blade move around the outside of the membrane to release the existing cover
Clean the lip where glue still exists
peel back the plastic cover from the part and press into place
Reverse steps 1,2,3 &4
Other Parts Used:
  • Ken from SOMERSET, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacing parts that were beginning to rust from outdoor exposure.
I had no problem. My husband is an engineer, so the repairs went well. The only problem I did have was that one of the parts did not arrive. come to find out that it was on backorder and arrived a day or two after I called. The person I spoke with when I inquired was most helpful and expeditious. All in all, my experience was excellent.
Other Parts Used:
Appliance Screw Escutcheon, Control (White) SWITCH-OFF Panel, Container Front (Black) Screw, 8-18 x 1/2 Range Screw
  • J. Dawn from Key West, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
2 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
July 8, 2021
I need the flat part that hooks onto the front of the trash compactor, the console with the name and 3 push buttons on off start, i dont need the switches they work fine
For model number ForeverPRO 9872017B Insert for Whirlpool Trash Compactor 1182216 AH985202
PartSelect logo
Hi Frank, Thank you for your question. The part number listed under your model number for the trash compactor touchpad is PS11775327. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Frank
July 9, 2021
I need part 16 and part 19 in the diagram, but don't see how 19 fits into 16?
For model number ForeverPRO 9872017B Insert for Whirlpool Trash Compactor 1182216 AH985202
PartSelect logo
Hi Frank, Thank you for your question. There are instructions listed with the part on our website that you may reference on how to install the part. Here is some information that customer posted on how he installed the part that may help, "1Turn the compactor off 2 Removed the plate on the top of the compactor. Mine was held by 2 screws. Make note of where the electrical connections are located 3 Remove the electrical connections on the operating plate. 4 Remove 2 screws holding the plate to the compactor the unit housing the operating buttons is now free from the compactor using a small blade move around the outside of the membrane to release the existing cover Clean the lip where glue still exists peel back the plastic cover from the part and press into place Reverse steps 1,2,3 &4. We hope this helps! Good luck with the repair!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11775327
Manufacturer Part Number: W11050447
Brand
Model Number
Description
Whirlpool
GC900QPPB0
Trash Compactor
Whirlpool
GC900QPPB1
Trash Compactor
Whirlpool
GC900QPPB2
Trash Compactor
Whirlpool
GC900QPPB3
Trash Compactor
Whirlpool
GC900QPPB4
Trash Compactor
Whirlpool
GC900QPPB5
Trash Compactor - COMPACTOR
Whirlpool
GC900QPPB6
Trash Compactor - TRASH COMPACTOR
Whirlpool
GC900QPPB7
Trash Compactor - Whirlpool Trash Compactor Gc900qppb7
Whirlpool
GC900QPPQ0
Trash Compactor
Whirlpool
GC900QPPQ1
Trash Compactor
Whirlpool
GC900QPPQ2
Trash Compactor
Whirlpool
GC900QPPQ3
Trash Compactor
Whirlpool
GC900QPPQ4
Trash Compactor
Whirlpool
GC900QPPQ5
Trash Compactor - COMPACTOR
Whirlpool
GC900QPPQ6
Trash Compactor - TRASH COMPACTOR
Whirlpool
GC900QPPQ7
Trash Compactor - Whirlpool Trash Compactor Gc900qppq7
Whirlpool
GX900QPPB0
Trash Compactor
Whirlpool
GX900QPPB1
Trash Compactor
Whirlpool
GX900QPPB2
Trash Compactor
Whirlpool
GX900QPPB3
Trash Compactor
Whirlpool
GX900QPPB4
Trash Compactor
Whirlpool
GX900QPPQ0
Trash Compactor
Whirlpool
GX900QPPQ1
Trash Compactor
Whirlpool
GX900QPPQ2
Trash Compactor
Whirlpool
GX900QPPQ3
Trash Compactor
Whirlpool
GX900QPPQ4
Trash Compactor
Whirlpool
GX900QPPS0
Trash Compactor
Whirlpool
GX900QPPS1
Trash Compactor
Whirlpool
GX900QPPS2
Trash Compactor
Whirlpool
GX900QPPS3
Trash Compactor
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service