This is a replacement mullion rail for your French door-style refrigerator. You will typically find the mullion rail on the left side refrigerator door. The mullion rail helps to keep the refrigerator door closed. If the door will not close properly or if you notice leaking on your floor, you may need to replace the door mullion. A faulty mullion can gather moisture, resulting in a leak. To replace the mullion, simply disconnect the old mullion from the wire harness and unscrew it. Re-attach the wire harness to the mullion and screw it back into place.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kristina D - December 27, 2023
Verified Purchase
Worked great
This part came quickly and was really easy to install. Way cheaper than buying a new fridge!
★★★★★
★★★★★
Mark H - November 24, 2023
Verified Purchase
Exact fit
Less than 5 minute to install ,and the part has been updated , so it will not fail like original
★★★★★
★★★★★
Christine C - June 15, 2023
Verified Purchase
Very easy repair
This part arrived really fast and I was able to replace the broken piece in 5 minutes. This flapper fit the older model of fridge I have and is a better quality and designed piece. I have confidence that this part will not wear out and break like the original flapper did.
★★★★★
★★★★★
Anson L - June 1, 2023
Verified Purchase
Easy to replace and install. Works as expected.
The part came in great condition and is easy to install. It’s a super important part as it keeps the fridge sealed properly.
★★★★★
★★★★★
Terry M - March 1, 2023
Verified Purchase
Flipper Plate
Part fitted perfectly. Very easy to install. Took about 5 minutes. Very pleased with this product.
★★★★★
★★★★★
Paul J - August 14, 2022
Verified Purchase
Arrived quick. Worked perfectly.
Perfect fit, upgraded from the original design where the spring failed. Quick, easy, saved money. Couldn't be happier.
★★★★★
★★★★★
MIKE B - April 20, 2022
Verified Purchase
Easy repair, done in minutes.
It wasn't difficult to replace this part. Just a few screws and easily lifted away. Installation was no trouble at all.
★★★★★
★★★★★
Harvey H - March 20, 2022
Verified Purchase
Great part
Worked well.
★★★★★
★★★★★
André T - October 30, 2021
Verified Purchase
Easy ton change 5 minutes
Perfect easy ton instal fit on perfect
★★★★★
★★★★★
Mathieu G - October 1, 2021
Verified Purchase
Easy install
Not exactly like original part but does the same job.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 18 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My nephew accidentally forced the door closed last year, which resulted in the door having to be re closed manually folding back the flap. Ugh!
Unscered 2 screws, unplug electrical connection under the screws, slide her flap into grooves, realign screw holes , and rescrew in. Done.
Other Parts Used:
Tiziana from WARWICK, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
23 of 38 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Door Mullion Spring
Had to buy the entire door mullion because the spring broke, wasn't happy. Got the new part very quickly and it was a new replacement part number. Somewhat tentative. Took it out of the box and looked it over. No spring! Groan! Thought I got the wrong part. Flipped the bottom hinge and it snapped open, no need for a spring! Two screws, disconnect the wire harness, throw away the old, get new, connect the wire harness, connect hinges, put in two screws! Super easy. Watch the video for some pointers along the way.
Other Parts Used:
Maurice from SEATTLE, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
15 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spring door million torn door gasket
Door million undid 2 screws in plug wire easy no need for directions. Gasket pull off old one fit New in with index finger no tools needed.
Watched a YouTube video on how to replace the door flipper (mullion). Very easy to unscrew the plate and disconnect the electrical circuit. Then gently slide up the flipper and replace with a new one.
Other Parts Used:
Patrick from AUGUSTA, WV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plate Assembly Spring Broken
Remove 2 screws holding to door. Slide assembly up. Unplug connector. Remove old Plate Assembly. Do reverse to reinstall. Plug connector. Push in wires. Slide plate on. Fasten screws. Done
Other Parts Used:
Jim from WELLINGTON, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front Plate Assembly Not Closing Properly
Found the part on Parts Select. Ordered the part, which came quickly. While waiting for delivery. I watched a short video on how to replace this part. I'm a 73 yr. old female, and no trouble at all. I really felt a sense of accomplishment. Thank you Parts Select.
Other Parts Used:
Brenda from WEATHERFORD, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring on old mullion fell out
Replaced with new mullion
Other Parts Used:
MIKE from ATLANTA, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spring on the mullion door broke for the last time
This was an incredibly easy repair! 1 phillips screwdriver and two screws. Disconnect the small adapter, and you are good to go!
Other Parts Used:
Sonya from VAIL, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring broke on Mullion
Watched the video. Took the screws out, unplugged the connection and slid mullion off. Then plugged the new one in, slid it on and attached the two screws.
Other Parts Used:
Michael from MONTGOMERY, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door gaskets bad and no ice
Replaced both gaskets on French style doors. Note: left and right gaskets are different part numbers. Had to remove flapper door to change the left gasket and all 3 wires on the flapper were broke. Replaced flapper door. Also found cover on top of the door hinge loose. Has a button on it that tells ice maker door is closed. Shuts off the water to the ice maker when door is open. Never knew that! Ice maker is now working again. P.S. gaskets are very easy to change. After removing 2 screws on flapper door, you need to tap it up in order to remove it.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandra
November 21, 2021
Is the mullion flap suppose to open or stay flat when the door is closed? We installed a new one and the flap stays flat against the mullion. Thought it would have opened to seal the opening between the two doors.
For model number LFX25978st/00
Hello Sandra, thank you for writing. We have researched the model you have provided and have found a video for PS12374439. The video shows exact positioning for you. We hope to hear from you soon.
12 people found this helpful.
Was this helpful?
Thank you for voting!
Butch
July 20, 2021
What is the dimensions of the door latch.
For model number 7951033010
Hello Butch, Thank you for the question. The Front Plate is about 37" Long. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
James
October 14, 2021
The photo looks like this part has a gray colored front surface. Is there a version in white?
For model number LFX25978SW/00
Hello James, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11708993 for the White Flipper Assembly. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Vivian
October 16, 2021
Do you know if this mullion will fit this 2 door, bottom freezer model with manufacturing date of 2013?
For model number 795.71033
Hello Vivian, Thank you for your inquiry. We have researched the partial model number you have provided and as there are two versions beginning with this model number, we show two different part numbers for the mullion. This mullion will fit model number 79571033010, and for model 79571033110 the part number for the mullion assembly is PS11708993. We do not receive the manufacturing dates from the manufacturer, so we would advise checking for the complete model number or checking with the serial number for the date. We hope this helps.
Left door plate assembly does not spring into place to allow for hands free door closure
For model number LFC25765ST
Hello Mark, thank you for writing. You have chosen the correct part for your model LFC25765ST. The Front Plate Assembly is PartSelect Number PS12374439. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
May 5, 2022
Looking to replace the door flapper. Can you confirm the correct part number?
For model number LG lfc25765sw /00
Hi Mark,
Thank you for your question. The part number listed under your model number for the door flipper assembly is PS11708993. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dale
October 23, 2023
What is the part number for the door mullion for this model with stainless exterior
For model number LFX25778
Hello Dale, Thank you for your inquiry. Researching your model, we confirm that PS12374439 is the compatible stainless door mullion. We hope this helps
1 person found this helpful.
Was this helpful?
Thank you for voting!
Martie
January 31, 2024
Is the wire harness in the door mullion replaceable or do I need to buy the entire door flap?
For model number LFX25974ST
Hi Martie, thank you for reaching out. The wire harness in the flipper assembly does not come separately. You may need to order the complete flipper assembly, part number PS12374439. If you need help placing an order, customer service is open 7 days a week!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jorge
June 6, 2024
One of the small white plastic holders on the left door, that hold the plate assembly at the top and bottom (the flapper door), where you slide the flapper door into for assembly from above, is broke. Is there 1) a name for this part? 2) is it replaceable 3) if unable to find, could a flathead screw go in there to hold the top of the flapper in place?
For model number LMX25986ST
Hi Jorge, thank you for reaching out. The part you are referring to is the mullion hinge mounting tab. It does not come separately. It comes as a part of the door assembly, part number PS8748970. You may need to replace the door assembly to fix the issue. We hope this helps!
The spring that provides the auto return on the flap broke. Unfortunately, a simple spring replacement does not appear to be offered anymore. Do I need the Plate or Flipper assembly?
For model number LFX25978SW /00
Hello Ken, thank you for writing. There is the Flipper in White as part PS11708993 or the Flipper in Stainless Steel color as part PS12374439. You are correct in that the spring is not sold separately. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12374439
Manufacturer Part Number: AGU75188619
