Part Location Diagram of WB27X10928 GE FUSE
See part 101 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

FUSE

 Fits your RVM1435WK01!
★★★★★
★★★★★
1 Review
$16.70
  Special Order
 Fits your RVM1435WK01!
PartSelect Number PS1481237
Manufacturer Part Number WB27X10928
Manufactured by GE
Product Description

FUSE Specifications

This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
No heat | Won’t turn on | Touchpad does not respond
This part works with the following products:
Microwave, Microwave Oven Combo, Range, Wall Oven.
This part works with the following products:
General Electric, Kenmore, Hotpoint, LG.
Part# WB27X10928 replaces these:
AP3994062, 1262970, WB27X0713, WB27X10114, WB27X10247, WB27X10288, WB27X10388, WB27X10474, WB27X1077, WB27X1159, WB27X713
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 17 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Other Parts Used:
  • Kim from Cliffside Park, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
958 of 1238 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave not heating
Rmovd top vent screen. Removed control panel. Removed fuse cover panel. Replaced fuse. Removed housing of door switches. Removd wiring from door switches and and removed door switches from housing. Replaced with new switches and re-connectd wiring. Re-attached panels.
Other Parts Used:
SWITCH MICRO Primary Door Interlock Switch
  • Steven from Manassas, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
169 of 267 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Some smuck put a metal object in company microwave
found fuse blown and heat damage to TCO sensor.
Other Parts Used:
Oven Cavity Thermal Cut Out
  • Jacob from Brewster, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
73 of 133 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I diagnosed the problem incorrectly: based on a previous repair.
The old fuse is perfectly good. The new ones arrived within a day.
Other Parts Used:
  • Ralph from Brandon, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
64 of 136 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
appliance stopped working -- no readout on screen
1. turned off electricity -- unplugged the unit 2. removed 3 screws on top of top vent, removed vent screen then I located the little white cylindrical fuse and popped it out with a table knife. Then I popped in the new fuse. Replaced the vent screen and screws -- plugged in the appliance and it is working again.
Other Parts Used:
  • Carolyn from ARMONK, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
23 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Suddenly had no heat. All else worked fine. A deep odd hum sound.
This did not fix my problem. I've ordered a new microwave.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Other Parts Used:
  • Katherine from WILLIAMSTOWN, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
16 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave stopped working
took off upper grille and touch pad and removed the old line fuse and replaced with a new fuse ...turned on it is working fine...sources of help: UTube and GE manuel
Other Parts Used:
  • John from OWOSSO, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Touch pad failed to respond to any programming effort
Went to onlin source, found a couple youtube videos then went to the GE site which had a not-too-easy that find trouble shooting guide. It was extremely helpful as it described a fuse as a fix 80% of the time for touch paid failure. I really didn't believe it would b a fuse, but it was the cheapest fix, $8. I got the fuse and was surprised to fine there are two of them on this model. I took a guess and replaced the top one ( neither fuse was black or burned to indicate a failure but the top one was a bit mor greyish). put it all back together and it works fine.
Other Parts Used:
  • charles from SARASOTA, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blown fuse in microwave
One small Phillips screwdriver and one fuse puller (I used cord). Unplug unit. Remove the two screws on the vent face plate. Remove the one screw on the panel assembly. Gently let hang. Pull the fuse located on the upper left wall. Replace fuse. Reassemble.
Other Parts Used:
  • Frank from VIPER, KY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave does not have power at all, though outlet has power
unplugged power cable / unhooked front vent / unscrew the monitor panel / slide up to dislodge / take the fuse out and put in the new one in / fuse is located right in front of monitor panel once its open might be covered by wirings / you can unpin the cables from the panel to make it easier for you just make sure to put it back properly or you can have somebody hold the panel for you. Installing the fuse is easy waiting for the parts is crazy......
Other Parts Used:
  • Ronie from BRIARWOOD, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

37 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
July 16, 2021
The microwave just died and has no light or display. Power is good at the outlet. I suspect the fuse but not sure. Do you have any replacement instructions for fuse replacement?
For model number JVM6175SK3SS
PartSelect logo
Hello David, Thank you for the question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it can not be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. The Microwave can hold a charge even when not plugged in and will need to be discharged before the repair. We hope this helps!

25 people found this helpful.

Was this helpful?
Thank you for voting!
Mary
January 5, 2022
My microwave comes on but does not heat.
For model number JVM1440BD 003
PartSelect logo
Hi Mary, Thank you for your question. If your microwave is not heating, there are some parts that you will need to check to see which one is causing the issue. You will need to check the fuse, the door switches, the high voltage diode, the magnetron, the hood thermostat and the thermal fuse. We have included a link that you may reference on how check these parts. We hope this helps! Good luck with the repair!

21 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Sue
September 5, 2019
Microwave only comes on for 8 seconds then shuts off.. pf is on control panel. could it be fuse inside microwave?
For model number JES1451DS1WW
PartSelect logo
Hello Sue, thank you for your question. The PF indicates a power failure within the unit. We would recommend testing the following parts for continuity. THERMOSTAT Part Number: WB24X10163, THERMOSTAT Part Number: WB27X11100, and FUSE Part Number: WB27X10928. If those parts are fine, the issue is probably with the main control board. I hope this helps!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
December 18, 2021
How do I and where is the fuse located
For model number JE1590SH01
PartSelect logo
Hi Tom, Thank you for your question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it cannot be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. Before starting this repair, unplug the microwave from the electrical outlet. You will also need to discharge the capacitor as it can hold a charge even when not plugged. We have included a link from our website that you may reference on how to discharge the capacitor. We hope this helps! If you have any questions, please let us know.

8 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
William
June 27, 2022
How do I access the fuse? I can't figure out how to remove the front panel or the control panel to check to see if the fuse is blown. I need to check this part because the microwave won't turn on and the control panel is unresponsive.
For model number PT7800SHSS
PartSelect logo
Hi William, Thank you for your question. NOTE: If you are not comfortable doing this yourself, please get an electrician to do this repair. Before you begin any repair, please unplug the appliance from the electrical outlet. Use a Phillips head screwdriver to unthread the screws securing the grill. With the screws removed, open the microwave oven door then the slide the grill to the left and lift up to remove it. Next remove the control panel mounting screw and then lift the control panel up to detach. Then remove the screw holding the inner access panel and then release the panel from the retaining clips. To avoid injury, you will need to release the potentially dangerous charge from the capacitor by placing a screwdriver with an insulated handle across the terminals. Be careful not to touch the metal portion of the tool. Use pliers to detach the old fuse from the noise filter board. Install the new fuse by snapping it into the bracket. Replace the inner access panel and secure it with the screws. Now insert the control panel tabs into the slots in the frame and push the panel down. Secure it with the mounting screw. Insert the tabs of the grill into the frame and slide it to the right. Shut the oven door and then secure the grill with the screws. Plug the power cord back in and the microwave should now work. We hope this helps. If you would like to place an order for a fuse, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Aaron
October 18, 2021
Hi - our GE Advantium microwave (from 2012) suddenly showed a "Key panel SHORTED. Service may be needed" message on the screen and stopped working. Will this fuse repair that short, or is a whole new panel necessary? And is replacing the panel feasible as a DIY project, for a relatively handy person but with limited appliance repair experience? Thank you!
For model number ZSA1201RSS01
PartSelect logo
Hello Aaron, Thank you for the question. This indicates the Control Panel with the Keypad will need to be replaced. Microwaves can be tricky since they can hold a dangerous charge even if left unplugged for a period of time. It will need to be discharged to safely perform the repair. If you are not familiar with Microwave repairs, it is best to contact a repair man. We hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Dennis
January 25, 2022
HOW DO I OPEN THE BOX TO REPLACE THE FUSE? WHAT SPECIAL TOOLS DO I NEED?
For model number JES1460DS3WW
PartSelect logo
Hello Dennis, Thank you for the question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it can not be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. The Microwave can hold a charge even when not plugged in and will need to be discharged before the repair. You will need a screw driver, no special tools. We hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Vicki
November 10, 2022
My microwave keeps scrolling press start but none of the buttons are responding .
For model number JEB1860SM1SS
PartSelect logo
Hello Vicki, thank you for contacting us. We would recommend replacing the fuse, part number PS1481237. If this does not help, the issue is probably related to the touchpad (control panel) and/or the electronic control board. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Christopher
April 25, 2022
Microwave stopped heating, want to change fuse first but I need to know how to do this. Second turntable keeps turning replaced one door switch but found that there are 3 switches which one or do I have to replace all 3 thanks for the help
For model number RVM1535DM2BB
PartSelect logo
Hello Christopher, thank you for the question. If the fuse was blown the appliance would not power on as it cuts power to the appliance once blown. The No Heat can be caused by a faulty door switch as well. Only way to know what switch is the issue is testing all three with a multimeter to check the continuity. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Ken
September 28, 2023
This GE Convection Microwave stopped working abruptly and the panel went dark. Replaced the ceramic fuse and was able to set the clock. However, as soon as I tested the unit with a cup of water, the MW went dead and the panel went dark. The ceramic fuse still tests good for continuity. What else can be causing the problem?
For model number PVM1790sr1ss
PartSelect logo
Hi Ken, thank you for the great question. Based on the description that you have provided, we would recommend checking the continuity of switches. If they are fine, then you have to replace the control board, part number PS1018328, to solve the problem. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1481237
Manufacturer Part Number: WB27X10928
Brand
Model Number
Description
Kenmore
36362702200
Microwave
Kenmore
36362709200
Microwave
Kenmore
36362709300
Microwave
Kenmore
36363672200
Microwave
Kenmore
36363672201
Microwave
Kenmore
36363673200
Microwave
Kenmore
36363674200
Microwave
Kenmore
36363674201
Microwave
Kenmore
36363679200
Microwave
Kenmore
36363679201
Microwave
Kenmore
36363692301
Microwave
Kenmore
36363692302
Microwave
Kenmore
36363692303
Microwave
Kenmore
36363693301
Microwave
Kenmore
36363693302
Microwave
Kenmore
36363693303
Microwave
Kenmore
36363694301
Microwave
Kenmore
36363694302
Microwave
Kenmore
36363694303
Microwave
Kenmore
36363699301
Microwave
Kenmore
36363699302
Microwave
Kenmore
36363699303
Microwave
Kenmore
36363703600
Microwave
Kenmore
91141485890
Microwave Oven Combo
Kenmore
91141485991
Microwave Oven Combo
Kenmore
91141485992
Microwave Oven Combo
Kenmore
91141485993
Microwave Oven Combo
Kenmore
91141485994
Microwave Oven Combo
Kenmore
91141485995
Microwave Oven Combo
Kenmore
91141485996
Microwave Oven Combo
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service