DC Condenser Fan Motor - 12V
$111.84
Special Order
PartSelect Number
PS1483567
Manufacturer Part Number
WR60X10209
Manufactured by
GE
Product Description
DC Condenser Fan Motor - 12V Specifications
This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Refrigerator DC Condenser Fan Motor - 12V
Troubleshooting
This part fixes the following symptoms:
Freezer section too warm | Fridge too warm | Noisy | Fridge and Freezer are too warm
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WR60X10209 replaces these:
AP4265957, 1195784, WR60X10209, WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Warm freezer and no ice
This story starts with a GE side-by-side refrigerator that has always had wide temperature swings and a temperamental water dispenser. The ice maker was not making ice, and the built in digital thermometer showed it was running warm. I suspected that the heat exchanger was full of dust and so looked there. What I found was that the condenser tank was hot to the touch and the fan wasn’t running. As an experiment, I aimed a fan at the it for a while I saw that the freezer temperature dropped back to normal.
.The fan is marked as 11.2 DC so I checked for voltage at the fan and found some. With three wires and no wiring diagram I wasn’t sure this answered all the questions, but hooking the fan to a 12 volt power supply didn’t get it to spin.
I priced parts at a couple websites before using partselect.com . They also have a good diagram to look at (Sears diagrams are really poor). I ordered the part with 2-day shipping; it arrived on time, was correct and fixed the problem.
.The fan is marked as 11.2 DC so I checked for voltage at the fan and found some. With three wires and no wiring diagram I wasn’t sure this answered all the questions, but hooking the fan to a 12 volt power supply didn’t get it to spin.
I priced parts at a couple websites before using partselect.com . They also have a good diagram to look at (Sears diagrams are really poor). I ordered the part with 2-day shipping; it arrived on time, was correct and fixed the problem.
Other Parts Used:
-
Paul from Suwanee, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
94 of 127 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan not running
Removed rear and front grills,brushed and vacuumed area- probably caused the fan motor to fail- unplugged fan, removed fan,motor,and shroud in 1 piece, carefully slipped fan off motor shaft, unscrewed shroud and motor. assembled in reverse order. Frige is in tight area, .I'll now roll it out and clean often
Other Parts Used:
-
Ray from Bensalem, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Socket set
74 of 102 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise coming from rear of fridge
Remove rear plate. Remove fan bracket. Replace fan gaskets, blade and motor. Replace bracket. Replace rear plate. Very simple. Fixed the problem.
Other Parts Used:
-
Edward from SILVER SPRING, MD
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer drop temp to 12 degrees.recommended temp zero.
Replace the motor fan on condenser and clean the condenser
Other Parts Used:
-
clyde from RIALTO, CA
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sally
April 19, 2018
1. Ice is forming in the freezer back wall. Now, it makes a loud knocking sound, ice builds up on freezer's back wall. The refrig stays above 50 degrees but now the freezer works (the last two days). The first thing that went was the icemaker then some parts of the refrig would freeze food. I don't really care about the ice maker and the water dispenser because i am now in a place without the hook-up. I had used a hair dryer and it used to help but not anymore.
For model number PFSS5NJWASS
Hello Sally, thank you for your question. The ice buildup on the back of the freezer wall is due to the evaporator coils that are behind that back wall, not defrosting. I would recommend replacing the HEATER DEF ASM PartSelect Number: PS2323339, the Defrost Thermostat PartSelect Number: PS1155318, Temperature Sensor PartSelect Number: PS304103 and the Evaporator Fan Motor
PartSelect Number: PS1019114 (if the motor is no longer blowing air into the fridge section from the back wall of the freezer). I hope this information helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Milton Ross
January 28, 2018
It's a french door fridge.The freezer is working fine.But the fridge stop working on the upper section.Is it the condenser fan that need to be change?
For model number Pfss5rkzass
Hello Milton, Thank you for your inquiry. The condenser fan is down by the compressor and is designed to cool the compressor and condenser coils. The evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. I would test both the evaporator fan and the damper assembly as that is what controls the flow of cold air from the freezer to the fridge section. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Gabe
September 19, 2017
Hi. In regards to my refrigerator. The freezer and refrigerator are both warm. The unit seems to be running but is very faint. Please advise on possible part. Thank you!
For model number PSCS3TGXAFSS
Hi Gabe,
Thank you for the question, if the appliance is still running and the fans still kick on and off I suggest checking the Electronic Board,PartSelect Number PS12069099.This board controls the operation of the unit and is the most likely the defective part.
Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Ahmed
September 16, 2021
Hi, It is about a GE side by side fridge. The fridge is not cooling well, the foods in the freezer is melting and the compressor is very very hot. When I put an external fan behind the fridge, the fridge was working well. The condenser fan is rotating but very slowly. Is this due to faulty condenser fan motor or the main board? What is the part number for the fan motor and the main board for this fridge model?
Thank you.
For model number GSG25MISAFWW
Hello Ahmed, Thank you for the question. This is normally caused by a defective DC Condenser Fan Motor. The Fan keeps the compressor cool so it is not over working and causing it to heat up and effect the temperature in the appliance. We suggest replacing the Fan Motor. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jan
March 23, 2018
Hi, the freezer section is not getting cold enough, the condenser fan turns very slow. It only gets 4.5 volt from the main control board. After we made the diagnostic test on the panel the freezer display pads is showing -18c but the temperature in the freezer is just +22c.Do you know what is the possible reason why it is like that? Could it be that there something happened when we did the diagnostic test? I hope to hear something from you soon.
For model number PSG29NHMHCBB
Hi Jan, Thank you for the question. If the fan is turning slow and it is not getting enough volts, I suggest replacing the control board. The board can also be causing the temperature display issues. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
December 17, 2019
My condenser coils continue to freeze up after several weeks of runtime. I can tell when the fresh food sides starts getting warm that the coils are freezing up and temperatures continue to rise. I have replaced all 3 temp sensors, the defrost thermostat and the defrost heater lamp but the problem continues. I have noticed that when the fan starts running that it is barely spinning and then ramps up speed after several minutes. Is this normal or could it be a problem that is causing the ice buildup?
For model number gsl25jfpa bs
Hello Mark and thanks for writing.
That might be your problem right there, it should not take several minutes for this fan to run at full speed. We hope this helps. Please contact us anytime.
For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair
https://partselectcom.azureedge.net/assets/manuals/F6D1BB2E5E98B96197959FE056359957205021C7.pdf
2 people found this helpful.
Was this helpful?
Thank you for voting!
Virgil
January 22, 2020
There is clicking sound coming from back of condenser fan it try’s to turn but will not i was wanting to know what part i need and volt i need thanks for ur time
For model number Gsh25igrbww
Hello Virgil, thank you for your question. If the clicking is coming from the condenser fan it should be replaced. However, that clicking is usually caused by a bad capacitor on the compressor. If the compressor isn't running, and the condenser fan isn't moving either, we would recommend testing the OVERLOAD Part #: PS310326, and RELAY START Part #: PS963837. If the compressor is running, but the condenser fan isn't moving when its on, the condenser fan should be replaced which is PartSelect Number: PS1483567. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
August 13, 2021
Will this part replace part number Panasonic wr60x10185
For model number PSHS6RGXCDSS
Hi Patrick,
Thank you for your question. The part number listed under your model number for the DC condenser fan motor is PS1483567. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Erin
May 20, 2024
Freezer and refrigerator are both 75 degrees, I believe the evaporator fan is running I can hear it and when I press the light switch it runs, I can tell that air is circulating but not cooling. I don’t think the compressor is trying to turn on, no clicking no other noises. Replaced defrost timer, evaporator fan, temp control about 2 years ago.
For model number ZFSB23DNDSS
Hello Erin, thank you for your inquiry. According to our research, the issue is most probably with the inverter board, part number PS8758693. It supplies voltage to the compressor. We would recommend checking it to fix the issue. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Roland Metaj
December 5, 2019
Freezer working refrigerator worm
For model number pshs6pgzbess
Hello Roland, thank you for your question. We would recommend testing the following parts. Temperature Sensor Part Number: WR55X10025, Defrost Thermostat Part Number: WR50X10068, Defrost Heater and Bracket Assembly Part Number: WR51X10055. If those parts are ok, the issue could be with the compressor switches and the condenser fan motor. I hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1483567
Manufacturer Part Number: WR60X10209
Manufacturer Part Number: WR60X10209
Brand
Model Number
Description