Part Location Diagram of WH49X10042 GE Agitator Coupling Kit
See part 310 in the diagram
Replacing your General Electric Washer Agitator Coupling Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Agitator Coupling Kit

★★★★★
★★★★★
5 Reviews
$87.32
  Special Order
PartSelect Number PS1517844
Manufacturer Part Number WH49X10042
Manufactured by GE
Product Description

Agitator Coupling Kit Specifications

This is a washing machine agitator coupling kit. It connects the transmission drive shaft to the agitator base. It includes the couple, gasket, and bolt.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Washer Agitator Coupling Kit

Replacing your General Electric Washer Agitator Coupling Kit
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Leaking | Spins slowly
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH49X10042 replaces these:
AP3964635, 1195917, WH49X10042, 175D2846P001, WH02X10037, WH02X1200, WH2X1200, WH43X0137, WH43X10009, WH43X137
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 114 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
One of eight clips broke off of the agitator assy allowing the assembly to come lose on heavy loads.
I replaced the coupling by only having to remove one bolt with a socket wrench. Once replaced I installed the new assy over the coupling making sure ro align the splines then pushing down until the assy snapped into place. Easy.
Other Parts Used:
Dual Action Agitator Fabric Softener Dispenser
  • Paul from Carneys Point, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
679 of 726 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken dampening strap and loose agitator
first remove the front washer cover by finding the two pressure clips that hold it to the top lid. gently push the putty knife into the clips one at a time. this will raise and separate them from the front panel. the panel will tilt forward and u can now remove it from the bottom clips by sliding it up and out. to open the top cover u remove the two 1/4 in screws on the sides of the front panel and lift the top. make sure to secure it in place or unplug the single electrical connection at the rear and remove the whole top from the clips, its really simple and the most convenient mehtod. to remove the straps u can now get to all four without much interference. there are two size screw heads so make sure u have a nut driver or small socket set. after changing the straps i went to change the agitator coupling. the agitator pulled directly up without a problem. just put your two hands under and pull straight up with one good jolt. the plastic coupler has one bolt in the middle that came out easily with a small socket set. my problem arose when the plastic coupler would not come off the metal shaft. after a short time of pulling and prying i finally decided to cut it off. using a small hacksaw and taking my time i put two cuts into the coupler. they were on opposite sides and where vertical, running along the steel shaft. i could now split it in two and it came off very easily and quickly. now when putting on the new one make sure the splines line up. push as far down as u can then use the center bolt to seat the gear all the way down. the agitator also has to be lined up just right. it also has splines on the interior that allow it to line up with the coupler and merely push down until it reseats itself in place. replace the top of the washer and then the front panel. don't forget to rebolt the top panel to the frame. push the front panel in until it snaps into place. full replacement time was about 40 minutes and actually not bad with the right tools.
Other Parts Used:
Tub Dampening Strap
  • molly from laguna niguel, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
284 of 302 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator would not move during wash cycle
I placed both hands under the agitator 180 degrees apart, gave a quick jerk, and seperated the agitator from the coupling. With the agitator removed, use a socket and ratchet to remove the bolt holding the coupling to the spline. Remove the old coupling and slide the new one over the spline. Lightly tap on the coupling if necessary. Insert the bolt with the ratchet and slide the agitator back over the coupling and you are done.
Other Parts Used:
  • Mark from Lexington, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
229 of 261 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub seal leaked, rusted the transmission bearing which locked up
I followed the instructions in the GE Consumer Service Training Technician Manual Pub. No. 31-10008.

I also power washed the basket and tub before reassembly.

The tub seal comes with the transmission and brake assembly so it's not necessary to order another seal.

The agitator coupling kit contains a redesigned coupler and longer screw with new o-ring.

I bought the hub nut, split ring, tub bearing, agitator coupling kit and washer hub because these are all the parts that go on the transmission shaft. I felt it was best to spend a few dollars more to replace every part involved with the spin and agitation of the washer.

I used the channel lock and a hammer with a shortened handle to remove and replace the hub nut. Use caution as the nut is aluminum.

The entire job took 5 hours.
Other Parts Used:
Split Ring Transmission and Brake Assembly Hub Washer Tub Bearing Washer Hub Nut Tub Seal
  • Wayne from Saint Augustine, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
210 of 248 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The metal shaft of the agitator stripped the plastic coupling inside so I decided to replace the entire agitator assembly.
I installed the coupler and tightened the bolt with an adjustable wrench. Then I aligned the agitator and snapped it onto the coupler. Then I snapped the fabric softener dispenser onto the agitator. All of this took less than 3 minutes and that includes putting the wrench back into the tool box.

I pulled the agitator off of the coupler and out of the machine. I moved the coupler in circles by hand to check to see if it was working properly. It wasn't. I got an adjustable wrench and removerd the bolt that held the coupler on. I pulled the coupler out of the wash basin and examined it. I saw that it was stripped out and I new I had to get a new one. I first called my local sears store to see if I could get the parts. First I spent about 20 minutes tied up in their phone system and then when I finally got to speak to an actual person they didn't have a clue. Then somehow I got transferred to the Sears 1-800- phone number and spent about 20 minutes talking with a parts person. Meanwhile I checked out partsselect.com while I was speaking with the Sears rep. It turns out that Sears wanted about $25 more for the parts than parts select and I was only placing a $50 order. When I brought this to the attention of the sales rep. they replied that they were shipping only GE repair parts. Big Deal. The parts that I got from parts select were the exact parts that I took out of the washer. Ordering online was very easy and convenient and I wasn't overcharged for shipping. The repair took less than 3 minutes and everything works like new. Thank you parts select.
Other Parts Used:
Dual Action Agitator Fabric Softener Dispenser
  • Amy from Falling Waters WV, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
190 of 220 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator would not turn during wash cycle
First raise the lid on the washer then remove the agitator by placing hands under the agitator 180 degrees apart and pulling up. Pulling up one side and then the other until the agiator lifts up and off. Mine was stuck tight so I had to really work it back and forth to get it loose. Be careful while lifting on the agitator because when it comes loose it could hit you in the face since you are over it while lifting. Once you get the agitator off use a 7/16 socket and 3/8 rachet and remove the coupling. Place the new coupling on the shaft, making sure to line up the splines on the shaft and the coupling and install the 7/16 bolt and thighten it. Place the agitator on the coupling by lining up the splines and pushing down on the agitator until it seats. Time to repair was 30 minutes.
Other Parts Used:
Agitator
  • James from Rineyville, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
135 of 154 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator was floating up off of base during washing
Removed agitator. Removed small bolt holding mounting device. Removed mounting device. Replaced everything in reverse order with new parts. No problems.
Other Parts Used:
Dual Action Agitator
  • Rebecca from Lititz, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
62 of 92 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator in washing machine not moving
First, I removed the liquid softner dispenser cup from the agitator. Next I gripped the bottom of the agitator and pulled straight up. This was the most difficult part of the repair. Next, I removed the couplier bolt with the appropriate size socket wrench. And then removed the couplier from the transmission shaft. This exposed the shaft. Upon receipt of parts from Part Select, I proceed to install in the reverse order. I slide the new couplier back onto the transmission shaft. and bolted down with new bolt using the original socket wrench. Next I slide on the new agitator making sure the "tongue and groves" matched. Then I placed the liquid softner cup back onto the new agitator. And with great joy my washer is working once more. Thank you Parts Select.
Other Parts Used:
Dual Action Agitator Screw - 1/4-20 MCH HXW 5/8 S
  • Diane from Zebulon, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
40 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stripped agitator, would not move during wash cycle
drilled off top plate of agitator to gain access ot bolt, removed bolt, removed agitator, replaced coupler and new bolt, snapped in place new agitator.
Other Parts Used:
Agitator
  • John from Savannah, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
36 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator was no turning
Repaired Agitator - required to pull from the bottom pulling on one side a little more then the other. Once you got loose it comes right off. Under neith there is a bolt that holds on agitator coupler. remove the bolt with wrench or socket wrench and then the agaitator coupler. Replace with new agitator coupler ,make sure grooves are aligned when putting on the rotor. Tap the top of the agitator coupler lightly until it is completely seated. Put the bolt on with wrench or socket wrench. Put the agitator back on over the agitator coupler and agin make sure grooves are alighned and push down until it feels it is seated. When done, give it a light pull to make sure it is secure and then you are done.
Other Parts Used:
  • Jody from Deefield, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
34 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

31 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Walter
September 9, 2017
I have pulled up on the agitator but it will not com off? Is the agitator 2 pieces ? I took the softener cap off . I can hold the bottom of the agitator and rotate the top clockwise and counter clockwise. But still cannot pull the agitator off. Any suggestions.
For model number GTWN3000M2WS
PartSelect logo
Hi Walter, Thank you for your inquiry. The agitator comes in one piece. There is video on our website about the agitator that you may reference. You will find it on our website under part number PS11736866. I hope this helps. Thank you and have a great day!

18 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Margaret
October 13, 2017
Washer will do everything but agitate, help, can i fix it?
For model number WBSR3140DAWW
PartSelect logo
Hi Margaret, Thank you for your question. Yes you should be able to fix it. I would suggest looking at this part, your agitator coupling to see if it has worn down. If that part is fine, then you may have to look into replacing your entire agitator. Good luck with your repair.

7 people found this helpful.

Was this helpful?
Thank you for voting!
TJ
May 10, 2019
Agitates normally and pumps water out, but will not spin. Motor does not turn on to spin even though all the water pumps out. Tested continuity of water level switch and the no contact closed and the nc contact opened.
For model number WJSR2070B2WW
PartSelect logo
Hello TJ, thank you for inquiring. For this symptom you will want to replace either the V-Style Drive Belt part PS270803, the Agitator Coupling Kit part PS1517844, or the Drain Pump and Motor Assembly part PS8768445. We hope this helps.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Earl
April 30, 2018
Not agitating, pulled the top off the agitator, does not have a bolt to take off, has 4 little things
For model number s2100e1ww
PartSelect logo
Hi Earl, Thank you for your question. If the washer is not agitating, There are some parts that you will need to check to see which ones are causing the issue. You will need to check the agitator coupling kit, the drive belt, the agitator, the inner tub base hub and the hub nut. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
BRAD Hatten
February 10, 2018
Agitator coupling kit not assessable as per video. Removed agitator cap but there is no opening to get to mounting bolt. Solid plastic 4" down with no opening to mounting bolt. 2 drain holes at solid plastic 4" down. Hotpoint ser# dh920861h washer agitates, drains but does not spin. 1 broken damping strap will need to be replaced also!
For model number VVSR1070D5
PartSelect logo
Hello Brad, Thank you for your inquiry. You have to pull the entire agitator off to get at the bolt that holds the coupling on. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Carroll
March 18, 2018
Why does agitater keep coming off
For model number WDSR2080D0WW
PartSelect logo
Hello Carroll, Thank you for your inquiry. It could be an issue with the agitator coupling, or one of the tabs on the bottom of the agitator that holds it to the coupling could be broken off. Check the agitator first and if one of the tabs is broken, then you would need to replace the agitator. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
LANC
January 24, 2020
Your site states that wh49x10042 will replace 175d2846p001 but another site says it won't which is correct? Q&a from other site is below and they were selling the same part.
For model number hotpoint
PartSelect logo
Hi Lanc. This part as showing as the replacement for 175d2846p001 and we get this information from the manufacturer directly. I would double check for the correct part based on your model number just to be sure. Thank you for your question and good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Migdalia
February 20, 2019
Does it come with the coupling and the screw?
PartSelect logo
Hello Migdalia, Thank you for your question. Yes, this includes the coupling as well as the bolt. Have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Kristen
November 27, 2018
My washer sounds like it wants to agitate but won't agigate
For model number WJSR2080V2WW
PartSelect logo
Hello Kristen, Thank you for the question. I suggest removing the Agitator and checking the Agitator Coupling Kit, PartSelect Number PS1517844. The agitator coupler connects the agitator to the agitator shaft. Common symptoms of a damaged coupler include: a grinding sound during the wash cycle, the washer refusing to agitate or spin, or the washing machine shakes and moves during the wash cycle. Unplug the washer and pull the agitator straight up. Remove the bolt that holds the coupler onto the shaft of the transmission and pull the coupler off. Be sure to clean any dirt, rust, or residue off the transmission spline grooves, and make sure the grooves on the agitator splines are clean and undamaged. We recommend using the gasket and bolt that come with the replacement coupling. Thank you for your inquiry, good luck with this repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Steve
January 3, 2019
The agitator doesn't agitate. The top agitator spins one direction, and locks in the other direction, which is the correct action.The lower agitator spins freely by hand. I have pulled the coupler. It also spins freely by hand. The drive shaft doesn't spin by hand, but the splines on the coupler seem to be intact. Should I go ahead and replace the coupler? thanks.
For model number WCSR4170DAWW
PartSelect logo
Hello Steve, Thank you for the question. I would suggest replacing the coupler but also checking the Hub Nut, Part Number: PS271505, Tub Bearing Washer Part Number: PS271509, Part Number: PS1766022, Split Ring, Part Number: PS1766022 and the Tub Seal, Part Number: PS4704237. Hope this helps, good luck with this repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1517844
Manufacturer Part Number: WH49X10042
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
52120TAWB
Washer
General Electric
56021A0WW
Washer
General Electric
56031A0WW
Washer
General Electric
56041A0WW
Washer
General Electric
56051A0WW
Washer
General Electric
56121T2WW
Washer
General Electric
56121T3WW
Washer
General Electric
56121T4WW
Washer
General Electric
56121T5WW
Washer
General Electric
56121T8WW
Washer
General Electric
56121TAWW
Washer
General Electric
56121TBWW
Washer
General Electric
56200T2WB
Washer
General Electric
56200T3WB
Washer
General Electric
56200T5WB
Washer
General Electric
56220T6WW
Washer
General Electric
56220T8WW
Washer
General Electric
56220TAWW
Washer
General Electric
56220TBWW
Washer
General Electric
56221B0WW
Washer
General Electric
56221B1WW
Washer
General Electric
56221B2WW
Washer
General Electric
56221B3WW
Washer
General Electric
56221T6WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service