Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
BELA S - July 15, 2024
Verified Purchase
excellent
on time ,excellent quality
★★★★★
★★★★★
John R - May 13, 2024
Verified Purchase
Easy install
Very quick delivery
★★★★★
★★★★★
Berchmans F - October 30, 2023
Verified Purchase
Ice Cube
And it makes lots of ice cubes!
★★★★★
★★★★★
Susan B - December 4, 2022
Verified Purchase
Ice Maker Working Great
Have ordered parts before and had no issues. Quick arrival is why we keep coming back. This part was on backorder for many months at another retailer. Had it from Part Select in a few days. The instructions videos are a bonus. We are very satisfied customers.
★★★★★
★★★★★
Ian D - January 21, 2021
Verified Purchase
Exactly as expected, relatively easy to install
We bought this to install in a new Whirlpool upright freezer. I'm fairly handy but usually not with plumbing! I was able to get it done in under an hour with minimal hassle. Once installed it took about 2 hours to start pumping out ice. Worked like a charm!
★★★★★
★★★★★
Conrad G - October 7, 2019
Verified Purchase
easy add on, works great so far
very easy to install, worked like it should, we will see in a few years if its still good
★★★★★
★★★★★
Tony W - June 19, 2019
Verified Purchase
Ice cubes are back in the house
The shipment arrived very fast. Everything was included. However, this unit was not exactly the same as the old unit. The electrical cable was way too short. And the mounting holes didn’t line up. Even a different plug on the end. We made it work by extending the cable with the end off the old unit. New ice bin doesn’t fit in our freezer. We have ice. Good job I can use a soldering iron!
★★★★★
★★★★★
Tim F - August 24, 2018
Verified Purchase
easy install works better the one downstairs
Just the right part even when no one can find it and it was an easy install.
★★★★★
★★★★★
Fintan B - August 15, 2018
Verified Purchase
Thought I had it wrong - but PartSelect were right.
Ordered this ice make to fit a Kenmore side by side. Arrived quite fast, everything in the box in great shape. Upon first attempt to install, thought we had ordered the wrong one - but discovered it was our mistake as we had not disconnected the plastic protector from the plug inside the freezer unit. Now that it is hooked up and working, can't hardly keep up with the ice it produces, which is fairly large size. However, still had to find a water connection to go from the pump to the source, and it is quite specific, but did get one. As well, the basket for the ice to drop into could be made of more durable plastic, it's not as strong as the one from my previous ice maker, but still quite good. Overall, very happy with it and would certainly order from PartSelect anytime.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 16 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wanted to install ice maker in my freezer
I was clening my uprght freezer and noticed that it was preped for an icemaker. I first went to the Whilpool website and could not find my part as my freezer was a 2008 model.
I saw PartSelect on the search page and went to thier site. I put in my modle number of the Whilpool Ice maker kit that was on the back of my freezer. PartSelect had the part in stock and approx $18.00 less than the other kits listed on the Whilpool site (that did not match my kit number). I orderd the kit on Sunday and it arrived on Wednesday. It took less than and hour to install. Every part I needed was included. The following day I installed the water line and now I have an extra icemaker.
Other Parts Used:
Donald A. from ORLANDO, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
75 of 107 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
REplaced ice maker
Replacement was very easy as new ice maker was identical to the old one. Took about 10 minutes.
Other Parts Used:
M from Lafayette, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
28 of 40 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The icemaker in the fridge stopped working
The repair was so simple. I removed the old icemaker in about 3 minutes and unpacked and installed the new one is about 10 minutes. It was literally a matter of removing a few screws! Eady to follow instructions!
Other Parts Used:
Rebecca from Dayton, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
17 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
installed ice maker
From the time I started to finish I worked 3 hours, this included installing the new ice maker, cutting into the cold water line in the basement and installing a t with a 6inch piece of pipe with a compression valve to connect to the small cooper tube, this is worth your time to do it this way, its a lot better connection than the small pierce valves that come with the kit, they will leak over time. I installed the filter in the waterline in the basement for easy access
Other Parts Used:
Dennis from Spring Valley, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
13 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
OLDER Ice Maker on the fritz
Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric
Other Parts Used:
Eric S from Boca Raton, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
6 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I added an ice maker to a 20 year old refridgerator
I added an icemaker kit. Everything I needed was in the kit. The refrigerator was presetup for an icemaker it was just never added. The only problem I had was that the holes for attaching the water solenoid were not pre drilled so I had to drill them myself and use sheet metal screws. The icemaker is working great.
Other Parts Used:
Nicholas from WEST CHESTER, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Did not have ice maker
Followed online video instructions
Other Parts Used:
Marisa from TEMPE, AZ
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It was my first time to install a ice maker.
I first read the instruction manual then I watched the installation video. My water line to it was 3/8. Went to the local ACE Hardware to purchase a short peace of 1/4 copper tubing and the fittings to connect them together. It makes ice every 55 minutes.
Other Parts Used:
Gary from MACOMB, OK
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
install ice maker with all parts for refridgerator with no ice cube hardware on it.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
June 28, 2022
will this work on my unit?? is it the complete kit ??? do I have the right part number (w11510803) ??? thanks
For model number wrs315snhm01
Hello Ray, thank you for your question. The correct part is PS11757272. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Clay
May 12, 2023
Is this the correct one for my model
For model number WRS325SDHB05
Hello Clay, thank you for your question. The Icemaker PS16660327 is the complete Add on kit if you do not already have one in your fridge. If you do have one and want to replace just the Icemaker unit, the Icemaker will be part PS12584610. Thank you and have a great day.
Hi, I'd like to order an ice maker for my Whirlpool sidekick upright freezer. I believe the part number is W11510803. Can you let me know if this is available? Thank you.
For model number WSZ57L18DM04
Hello Shirallee, thank you for the question. Yes, the ice maker for your model is available, the part number is PS16660327. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ray
November 25, 2022
Need wire harness part # for this ice maker.
Similar to but different from w10309400.
For model number W11510803
Hello Ray, thank you for your question. The Wire Harness comes with the Icemaker PS16660327. Good luck with this repair.
Was this helpful?
Thank you for voting!
Gerard
November 28, 2022
Does this unit fit in the above model: Whirlpool ET1CHEXB02?
For model number ET1CHEXVB02
Hello Gerard, thank you for your question. No, this is not compatible. The correct Icemaker is PS358591. We hope this information will help you.
looking for ice maker(or just the wire harness as i have old ice maker from previous sidekick freezer) for this model
For model number WSZ57L18DM06
Hello Danny, thank you for reaching out. This will be the correct ice maker, part number PS16660327, for your given model. This ice maker is a complete kit and it includes the wire harness. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Suzanne
November 17, 2022
what icemaker is compatible?
For model number whirlpool sidekick freezer WSZ57L18DM03
Hi Suzanne,
Thank you for your question. The part number listed under your model number for the add-on ice maker kit is PS11757272. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Lynn
August 26, 2023
Need icemaker kit
For model number ET8WTKXKQ08
Hello Lynn, thank you for reaching out. According to our research, the ice maker for your model is part number PS16660327. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Frank
May 5, 2024
This is the Whirlpool refrigerator model that I have and it already has an ice make maker that by the way, it has been replaced twice while the refrigerator was under warranty.
Now that it is out of warranty, I would like to replace the icemaker myself and would like to know if this one would be a superior model to the OEM.
Thanks!
For model number WRS325SDHW05
Hi Frank, thank you for reaching out. Yes, this is the genuine OEM ice maker kit. Every part found on our site is authentic and made to the same standards as the original part. We hope this information helps!
Was this helpful?
Thank you for voting!
Monica
June 12, 2024
Serial #VSC4774440 WOULD LIKE TO KNOW WHICH ICE MAKER TO USE IN THIS MODEL . THANKYOU
For model number MRT311FFFH00
Hello Monica, thank you for getting in touch. The compatible ice maker assembly for your model is part number PS16660327. If you need help placing an order, customer service is open 7 days a week!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16660327
Manufacturer Part Number: W11510803
