Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Misty
January 17, 2018
The door is not shutting it will not stay shut what part do I need to fix it
For model number Wmh31017ab2
Hi Misty, Thank you for the question. If the hooks on the door are not damaged, you may need to check or replace the Interlocks, Part Number: PS11745301 and Part Number: PS11749178. You can check to see if they have not come loose or if a switch is out of place. The interlock could be damaged and need to be replaced. Hope this helps!
Door won’t latch closed. All switches are good and i replaced interlocks (top and bottom) with no luck. Should i try replacing springs? Everything works perfect if i keep a little pressure on door : /. Thanks in advance.
For model number ywmh76719cs-0 Whirlpool microwave
Hi Virgilio,
Thank you for your question. If your microwave door won’t close or won’t latch, it usually means there is an issue with the door latch assembly. The latch assembly typically has two hooks which link to the switch holder on the frame of the microwave. When the hooks work properly, they engage the switches to begin powering the microwave, so having them in working order is important. The latch assembly is spring-loaded to provide the necessary tension to engage the hooks. A broken door latch may be as simple as a broken hook or worn out spring, which will require replacing the door latch assembly. To access the assembly, unplug the microwave and take off the inner door panel, which is held in place with plastic tangs. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ryan
March 28, 2019
Do both the top and bottom support interlocks require a spring? My door will not latch to the top interlock and i noticed there is no spring present. The bottom appears to be latching and switching correctly with a spring present.
For model number WMH53520CS
Hello Ryan, Thank you for the question. Checking the diagram there should be a spring at the top. Hope this helps!
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be properly tested followi...
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heating properly or if it...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1964350
Manufacturer Part Number: W10156812
