Part Location Diagram of 61005625 Whirlpool Ice Bucket Support Enclosure
See part 20 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Ice Bucket Support Enclosure

$211.42
  Special Order
PartSelect Number PS2060969
Manufacturer Part Number 61005625
Manufactured by Whirlpool
Product Description

Ice Bucket Support Enclosure Specifications

This part holds and supports the bucket that holds the ice when dropped from the icemaker.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Jenn-Air, Crosley, Magic Chef.
Part# 61005625 replaces these:
AP4070340, 916500, 61004818, 61005625
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Ice auger motor broke away from the ice enclosure
Quiet a simple repair. First I removed the ice maker bin and the plastic side panel on the right hand side. From there, I was able to remove the ICE ENCLOSURE . It unhooks. Next I removed the ICE DESPENSOR ENGAGEMENT YOKE. It has reverse threads so be careful. Next I removed the ICE AUGER MOTOR. Its located at the back of the ICE ENCLOSURE and held in place by 4 phillips screws. You also need to remove the SOLENOID YOKE ASSEMBLY which is located just to the left of the ICE AUGER MOTOR. It unscrews with 2 phillips screws. Next I reassembled the ICE AUGER MOTOR and SOLENOID YOKE ASSEMBLY to the new ICE ENCLOSURE. Then I reinstalled the ENGAGEMENT YOKE and snapped the unit back in place.
Other Parts Used:
  • Thomas from Granite Bay, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
28 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Auger drive motor pulled away from enclosure and water was leaking into the ice bucket
Removed the screws holding the housing inplace pulled and threw away than went to install the new drive motor but the screws were of a different thread so reinstalled the old motor and put the housing and bucket back together. after thawing out the water fill tube put it back into the cup-water fill and put clamp back in place. system is performing like brand new.
Other Parts Used:
Ice Bucket Auger Drive Motor Kit Water Fill Cup and Bearing
  • Charles from Helendale, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice machine motor broke from housing & fridge door lower hinge worn, so door is staying closed
Just pulled out ice bucket put to the side and then pulled out framed housing that surrounds the ice bucket tray and put on table
went in the rear where the turn motor is and disconnected the wires from the housing next to it and disconnected the motor which had cracked the wal it was mounted to and broke and fell which left a huge hole and the , took the 4 screws out and remounted it onto the new housing rear wall, note that to get the twist key lever that unscrews clock wise you may have to hit wit a hammer bluntly to brak it lose first then it unscrews easy, but this has to be done first before re assembly of the motor as it goes through the new housing wall , once this is donr then put your screw end through the hole and re assemble the wing devise back onto the moter screw drive which it will screw on counter clockwise and tap a few quick times to snug with a ball hamer or a small hammer, T
The hinge door pin is real easy, just unscrew the top of door 3 screwa and lift off the door set aside put new door pin hinge on then set the door back onto the pin hole align up and set it back down in the hinge hole and replace screws on the upper door hinge on top of fridge. all this took about 5 minutes tops, it took me more time to take all the items out of the doorway of my fridge that it did to do the task itself. Hope this could help.
Other Parts Used:
Lower Hinge Pin
  • David from Spring Hill, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Bucket Support Enclosure broken
I removed the broken ice bucket support enclosure using the nut driver and screw driver. The new part had to have the ice bucket motor attached. The metal piece that attaches to the motor shaft had to first be removed, which was somewhat difficult (careful! the thread is reversed). The motor and spring assebly had to be re-attached to the new ice bucket support enclosure piece.
This repair was relatively easy.
Other Parts Used:
  • Mark from Omaha, NE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cheap thin plastic the ice augar drive motor is mounted to cracks and breaks the plastic
removed one holding screw (left side center}, used pliers to hold motor shaft so I could unscrew auger drive fork (counter clockwise), then unscrew two screws for ice bucket door magnet push lever, unscrew four screws to auger motor and toss damaged ice bucket support enclosure and don't forget to screw in that one holding screw on lower left side .. then remount both components onto new thin plastic ice bucket support enclosure ... reassemble remaining ice bucket right side wall and slide in main ice bucket with auger. Not a big fix, but part & shipping was just short of $80 ..
Other Parts Used:
  • Robert from Hagaman, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic bracket for ice tray auger had broken with age
The repair was relatively easy. After the ice tray is removed. The plastic box holding it has 3 screws holing it. After those are removed, the tray will begin to slide out. You need to unplug the controls at the back and then the old tray can be removed. The old plastic could then be removed from the ice auger motor. The solenoid is removed from the tray with 4 screws. The only challenging part was removing the ice auger spindle. I was warned that it had reverse threads, and I may need to hit it with a hammer. However, I needed to purchase a thin set of vice grips to hold the shaft, while I turned the auger spindle. It took quite a bit of umph the get the thread connection to move. Re-installation was easy after that.
Other Parts Used:
  • Larry from Shreveport, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2060969
Manufacturer Part Number: 61005625
Brand
Model Number
Description
Maytag
12001686
Ice Maker
Maytag
12001748
Refrigerator - Maytag Refrigerator Model 12001748 Parts
Maytag
12001749
Refrigerator - Maytag Refrigerator Model 12001749 Parts
Maytag
12001750
Refrigerator - Maytag Refrigerator Model 12001750 Parts
Amana
ARS2760BW
Refrigerator - Side-by-side
Maytag
AS2728GIHB
Refrigerator
Maytag
AS2728GIHW
Refrigerator
Crosley
CS27G6DB
Refrigerator - Side-by-side
Crosley
CS27G6DQ
Refrigerator - Side-by-side
Crosley
CS27G6DW
Refrigerator - Side-by-side
Magic Chef
CSD2725ARA
Refrigerator - Side-by-side
Magic Chef
CSD2725ARB
Refrigerator - Side-by-side
Magic Chef
CSD2725ARW
Refrigerator - Side-by-side
Maytag
GS2726CEDB
Refrigerator
Maytag
GS2726CEDW
Refrigerator
Maytag
GS2726CEGW
Refrigerator - Side-by-side
Maytag
GS2726CEHQ
Refrigerator
Maytag
GS2727EAD1
Refrigerator
Maytag
GS2727EADW
Refrigerator
Maytag
GS2727EED3
Refrigerator
Maytag
GS2727EED5
Refrigerator
Maytag
GS2727EEDB
Refrigerator
Maytag
GS2727EEDW
Refrigerator
Maytag
GS2727GAH1
Refrigerator
Maytag
GS2727GEH3
Refrigerator
Maytag
GS2727GEHB
Refrigerator
Maytag
GS2727GEHW
Refrigerator
Maytag
GS2728EEDB
Refrigerator
Maytag
GS2728EEDW
Refrigerator
Maytag
GS2728GEHB
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service